DQA测试验证项目 » LP160

root@LPA3588:~#

root@LPA3588:~#

root@LPA3588:~#

root@LPA3588:~#

root@LPA3588:~#

root@LPA3588:~#

root@LPA3588:~# lsblk

NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

mmcblk0      179:0    0  29.1G  0 disk

├─mmcblk0p1  179:1    0     1M  0 part

├─mmcblk0p2  179:2    0     4M  0 part

├─mmcblk0p3  179:3    0     4M  0 part

├─mmcblk0p4  179:4    0    64M  0 part

├─mmcblk0p5  179:5    0   128M  0 part

├─mmcblk0p6  179:6    0    32M  0 part

└─mmcblk0p7  179:7    0  28.9G  0 part /

mmcblk0boot0 179:32   0     4M  1 disk

mmcblk0boot1 179:64   0     4M  1 disk

nvme0n1      259:0    0 232.9G  0 disk

└─nvme0n1p1  259:1    0 232.9G  0 part

root@LPA3588:~# lsblk

NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

mmcblk0      179:0    0  29.1G  0 disk

├─mmcblk0p1  179:1    0     1M  0 part

├─mmcblk0p2  179:2    0     4M  0 part

├─mmcblk0p3  179:3    0     4M  0 part

├─mmcblk0p4  179:4    0    64M  0 part

├─mmcblk0p5  179:5    0   128M  0 part

├─mmcblk0p6  179:6    0    32M  0 part

└─mmcblk0p7  179:7    0  28.9G  0 part /

mmcblk0boot0 179:32   0     4M  1 disk

mmcblk0boot1 179:64   0     4M  1 disk

nvme0n1      259:0    0 232.9G  0 disk

└─nvme0n1p1  259:1    0 232.9G  0 part

root@LPA3588:~# [   39.357272] rk806 spi2.0: SPI transfer timed out

[   39.357310] spi_master spi2: failed to transfer one message from queue

[   39.357340] E : [File] : drivers/gpu/arm/bifrost/platform/r[   39.409942] SError Interrupt on CPU7, code 0xbe000411 -- SError

[   39.409946] CPU: 7 PID: 48 Comm: kworker/7:0H Not tainted 5.10.110 #659

[   39.409948] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.409951] Workqueue: events_highpri pending_submission_worker

[   39.409957] pstate: 40c00009 (nZcv daif +PAN +UAO -TCO BTYPE=--)

[   39.409959] pc : kbase_pm_init_hw+0x88/0x600

[   39.409961] lr : kbase_pm_init_hw+0x7c/0x600

[   39.409963] sp : ffffffc0128fbb10

[   39.409965] x29: ffffffc0128fbb10 x28: ffffff8003372300

[   39.409971] x27: ffffff80ef79df40 x26: ffffffc012eff000

[   39.409977] x25: ffffff8006650000 x24: ffffff8006652c20

[   39.409982] x23: ffffffc012514000 x22: 0000000000000000

[   39.409987] x21: 0000000000000001 x20: ffffff8006652a98

[   39.409992] x19: ffffff8006650000 x18: 0000000000000030

[   39.409996] x17: 0001400000000000 x16: ffffffc0124b4000

[   39.410001] x15: 0000000000000001 x14: 06a0006000000000

[   39.410006] x13: 06a0000000000000 x12: 0000700000000000

[   39.410011] x11: 0000000000000003 x10: 0000000000000000

[   39.410016] x9 : ffffffc010a2b998 x8 : 0000000000000001

[   39.410021] x7 : 0000000000001000 x6 : 0000000000000000

[   39.410026] x5 : 0000000000000000 x4 : 00000000fffe2004

[   39.410031] x3 : 000000000000cfff x2 : 00000000ffffffff

[   39.410036] x1 : 00000000000000d9 x0 : 0000000000000000

[   39.410042] Kernel panic - not syncing: Asynchronous SError Interrupt

[   39.410045] CPU: 7 PID: 48 Comm: kworker/7:0H Not tainted 5.10.110 #659

[   39.410048] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.410050] Workqueue: events_highpri pending_submission_worker

[   39.410053] Call trace:

[   39.410056]  dump_backtrace+0x0/0x1e0

[   39.410058]  show_stack+0x24/0x30

[   39.410060]  dump_stack_lvl+0xd0/0xf8

[   39.410062]  dump_stack+0x18/0x38

[   39.410064]  panic+0x168/0x348

[   39.410065]  nmi_panic+0x7c/0x80

[   39.410068]  arm64_serror_panic+0x8c/0x98

[   39.410070]  do_serror+0x3c/0x6c

[   39.410072]  el1_error+0x90/0x110

[   39.410074]  kbase_pm_init_hw+0x88/0x600

[   39.410076]  kbase_pm_clock_on+0x298/0x3a0

[   39.410079]  kbase_pm_do_poweron+0x2c/0xb0

[   39.410081]  kbase_pm_update_active+0x160/0x250

[   39.410083]  kbase_hwaccess_pm_gpu_active+0x1c/0x30

[   39.410086]  kbase_pm_context_active_handle_suspend+0x124/0x260

[   39.410089]  scheduler_pm_active_handle_suspend+0x98/0x10c

[   39.410091]  scheduler_wakeup+0xb4/0x110

[   39.410094]  kbase_csf_scheduler_queue_start+0x2b8/0x620

[   39.410096]  pending_submission_worker+0x130/0x150

[   39.410098]  process_one_work+0x20c/0x49c

[   39.410100]  worker_thread+0x1a0/0x534

[   39.410102]  kthread+0x134/0x13c

[   39.410104]  ret_from_fork+0x10/0x3c

[   39.410115] CPU1: stopping

[   39.410205] CPU4: stopping

[   39.410215] CPU6: stopping

[   39.410226] CPU: 6 PID: 0 Comm: swapper/6 Not tainted 5.10.110 #659

[   39.410232] CPU5: stopping

[   39.410235] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.410238] Call trace:

[   39.410252]  dump_backtrace+0x0/0x1e0

[   39.410261]  show_stack+0x24/0x30

[   39.410268]  dump_stack_lvl+0xd0/0xf8

[   39.410274]  dump_stack+0x18/0x38

[   39.410282]  local_cpu_stop+0x78/0x80

[   39.410290]  ipi_handler+0x170/0x280

[   39.410299]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.410308]  __handle_domain_irq+0x80/0xe0

[   39.410313]  gic_handle_irq+0x100/0x36c

[   39.410318]  el1_irq+0xcc/0x180

[   39.410326]  cpuidle_enter_state+0xe4/0x420

[   39.410332]  cpuidle_enter+0x44/0x5c

[   39.410341]  do_idle+0x238/0x2e4

[   39.410349]  cpu_startup_entry+0x30/0x6c

[   39.410358]  secondary_start_kernel+0x190/0x1ec

[   39.410367] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.10.110 #659

[   39.410371] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.410373] Call trace:

[   39.410385]  dump_backtrace+0x0/0x1e0

[   39.410394]  show_stack+0x24/0x30

[   39.410401]  dump_stack_lvl+0xd0/0xf8

[   39.410407]  dump_stack+0x18/0x38

[   39.410415]  local_cpu_stop+0x78/0x80

[   39.410423]  ipi_handler+0x170/0x280

[   39.410431]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.410440]  __handle_domain_irq+0x80/0xe0

[   39.410445]  gic_handle_irq+0x100/0x36c

[   39.410450]  el1_irq+0xcc/0x180

[   39.410458]  cpuidle_enter_state+0xe4/0x420

[   39.410464]  cpuidle_enter+0x44/0x5c

[   39.410473]  do_idle+0x238/0x2e4

[   39.410481]  cpu_startup_entry+0x30/0x6c

[   39.410490]  secondary_start_kernel+0x190/0x1ec

[   39.410650] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.10.110 #659

[   39.445579] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.446141] Call trace:

[   39.446367]  dump_backtrace+0x0/0x1e0

[   39.446692]  show_stack+0x24/0x30

[   39.446993]  dump_stack_lvl+0xd0/0xf8

[   39.447315]  dump_stack+0x18/0x38

[   39.447615]  local_cpu_stop+0x78/0x80

[   39.447937]  ipi_handler+0x170/0x280

[   39.448261]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.448725]  __handle_domain_irq+0x80/0xe0

[   39.449090]  gic_handle_irq+0x100/0x36c

[   39.449435]  el1_irq+0xcc/0x180

[   39.449715]  cpuidle_enter_state+0xe4/0x420

[   39.450082]  cpuidle_enter+0x44/0x5c

[   39.450405]  do_idle+0x238/0x2e4

[   39.450696]  cpu_startup_entry+0x30/0x6c

[   39.451042]  secondary_start_kernel+0x190/0x1ec

[   39.451446] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 5.10.110 #659

[   39.451998] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.452560] Call trace:

[   39.452790]  dump_backtrace+0x0/0x1e0

[   39.453129]  show_stack+0x24/0x30

[   39.453432]  dump_stack_lvl+0xd0/0xf8

[   39.453758]  dump_stack+0x18/0x38

[   39.454063]  local_cpu_stop+0x78/0x80

[   39.454391]  ipi_handler+0x170/0x280

[   39.454720]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.455185]  __handle_domain_irq+0x80/0xe0

[   39.455555]  gic_handle_irq+0x100/0x36c

[   39.455902]  el1_irq+0xcc/0x180

[   39.456185]  cpuidle_enter_state+0xe4/0x420

[   39.456557]  cpuidle_enter+0x44/0x5c

[   39.456885]  do_idle+0x238/0x2e4

[   39.457180]  cpu_startup_entry+0x30/0x6c

[   39.457531]  secondary_start_kernel+0x190/0x1ec

[   39.563794] CPU3: stopping

[   39.563800] CPU2: stopping

[   39.564045] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.110 #659

[   39.564838] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.565400] Call trace:

[   39.565626]  dump_backtrace+0x0/0x1e0

[   39.565950]  show_stack+0x24/0x30

[   39.566242]  dump_stack_lvl+0xd0/0xf8

[   39.566564]  dump_stack+0x18/0x38

[   39.566864]  local_cpu_stop+0x78/0x80

[   39.567188]  ipi_handler+0x170/0x280

[   39.567512]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.567978]  __handle_domain_irq+0x80/0xe0

[   39.568343]  gic_handle_irq+0x100/0x36c

[   39.568687]  el1_irq+0xcc/0x180

[   39.568966]  cpuidle_enter_state+0xe4/0x420

[   39.569343]  cpuidle_enter+0x44/0x5c

[   39.569666]  do_idle+0x238/0x2e4

[   39.569957]  cpu_startup_entry+0x34/0x6c

[   39.570311]  secondary_start_kernel+0x190/0x1ec

[   39.570712] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.10.110 #659

[   39.571263] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.571824] Call trace:

[   39.572049]  dump_backtrace+0x0/0x1e0

[   39.572373]  show_stack+0x24/0x30

[   39.572673]  dump_stack_lvl+0xd0/0xf8

[   39.572996]  dump_stack+0x18/0x38

[   39.573295]  local_cpu_stop+0x78/0x80

[   39.573618]  ipi_handler+0x170/0x280

[   39.573941]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.574405]  __handle_domain_irq+0x80/0xe0

[   39.574771]  gic_handle_irq+0x100/0x36c

[   39.575115]  el1_irq+0xcc/0x180

[   39.575393]  cpuidle_enter_state+0xe4/0x420

[   39.575770]  cpuidle_enter+0x44/0x5c

[   39.576092]  do_idle+0x238/0x2e4

[   39.576381]  cpu_startup_entry+0x34/0x6c

[   39.576727]  secondary_start_kernel+0x190/0x1ec

[   39.615133] CPU0: stopping

[   39.615384] CPU: 0 PID: 879 Comm: kworker/0:3H Not tainted 5.10.110 #659

[   39.615968] Hardware name: Rockchip RK3588 NEARDI LPA3588 Board (DT)

[   39.616534] Workqueue: kblockd blk_mq_timeout_work

[   39.616957] Call trace:

[   39.617181]  dump_backtrace+0x0/0x1e0

[   39.617505]  show_stack+0x24/0x30

[   39.617807]  dump_stack_lvl+0xd0/0xf8

[   39.618130]  dump_stack+0x18/0x38

[   39.618422]  local_cpu_stop+0x78/0x80

[   39.618746]  ipi_handler+0x170/0x280

[   39.619069]  handle_percpu_devid_fasteoi_ipi+0x9c/0x174

[   39.619535]  __handle_domain_irq+0x80/0xe0

[   39.619900]  gic_handle_irq+0x100/0x36c

[   39.620243]  el1_irq+0xcc/0x180

[   39.620523]  free_irq+0x2d4/0x3e0

[   39.620824]  pci_free_irq+0x2c/0x40

[   39.621138]  nvme_suspend_queue.isra.0+0xc8/0xdc

[   39.621550]  nvme_dev_disable+0xbc/0x2a0

[   39.621896]  nvme_timeout+0xdc/0x350

[   39.622219]  blk_mq_check_expired+0x90/0xe0

[   39.622594]  bt_iter+0xa0/0xd0

[   39.622874]  blk_mq_queue_tag_busy_iter+0x1bc/0x320

[   39.623306]  blk_mq_timeout_work+0x7c/0x160

[   39.623674]  process_one_work+0x20c/0x49c

[   39.624029]  worker_thread+0x1a0/0x534

[   39.624362]  kthread+0x134/0x13c

[   39.624651]  ret_from_fork+0x10/0x3c

DDR Version V1.08 20220617

LPDDR4, 2112MHz

channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB

channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB

channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB

channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=1024MB

Manufacturer ID:0xff

CH0 RX Vref:27.7%, TX Vref:12.2%,0.0%

CH1 RX Vref:28.7%, TX Vref:12.2%,0.0%

CH2 RX Vref:27.7%, TX Vref:12.2%,0.0%

CH3 RX Vref:26.7%, TX Vref:12.2%,0.0%

change to F1: 528MHz

change to F2: 1068MHz

change to F3: 1560MHz

change to F0: 2112MHz

out

U-Boot SPL board init

U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)

Failed to set cpub01

Failed to set cpub23

unknown raw ID phN

unrecognized JEDEC id bytes: 00, 00, 00

Trying to boot from MMC2

MMC: no card present

mmc_init: -123, time 0

spl: mmc init failed with error: -123

Trying to boot from MMC1

Trying fit image at 0x4000 sector

## Verified-boot: 0

## Checking atf-1 0x00040000 ... sha256(ce2098067b...) + OK

## Checking uboot 0x00200000 ... sha256(4b4ad29028...) + OK

## Checking fdt 0x0033b578 ... sha256(c07f4a4d71...) + OK

## Checking atf-2 0x000f0000 ... sha256(ebc45c531e...) + OK

## Checking atf-3 0xff100000 ... sha256(9ded9f3bb5...) + OK

## Checking optee 0x08400000 ... sha256(fde0860845...) + OK

Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)

Total: 114.168 ms

INFO:    Preloader serial: 2

NOTICE:  BL31: v2.3():v2.3-444-g1450d21e8:derrick.huang

NOTICE:  BL31: Built : 16:25:50, Oct 12 2022

INFO:    spec: 0x1

INFO:    ext 32k is not valid

INFO:    ddr: stride-en 4CH

INFO:    GICv3 without legacy support detected.

INFO:    ARM GICv3 driver initialized in EL3

INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0

INFO:    system boots from cpu-hwid-0

INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001

INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz

INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz

INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz

INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz

INFO:    BL31: Initialising Exception Handling Framework

INFO:    BL31: Initializing runtime services

INFO:    BL31: Initializing BL32

INFO:    hdmirx_handler: dma not on, ret

I/TC:

I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64

I/TC: Primary CPU initializing

I/TC: Primary CPU switching to normal world boot

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0x200000

INFO:    SPSR = 0x3c9

U-Boot 2017.09 (May 22 2023 - 17:23:47 +0800)

Model: Rockchip RK3588 Evaluation Board

PreSerial: 2, raw, 0xfeb50000

DRAM:  3.7 GiB

Sysmem: init

Relocation Offset: eda3b000

Relocation fdt: eb9fa238 - eb9fecc0

CR: M/C/I

Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0

Bootdev(atags): mmc 0

MMC0: HS200, 200Mhz

PartType: EFI

DM: v2

boot mode: None

FIT: no signed, no conf required

DTB: rk3588-neardi-linux-lpa3588-f0.dtb

HASH(c): OK

Pre-reloc: vcc_mipicsi1

I2c0 speed: 100000Hz

en-gpios- not found!

vdd_cpu_big0_s0 800000 uV

en-gpios- not found!

vdd_cpu_big1_s0 800000 uV

I2c1 speed: 100000Hz

en-gpios- not found!

vdd_npu_s0 800000 uV

spi2: RK806: 2

ON=0x00, OFF=0x00

vdd_gpu_s0 750000 uV

vdd_cpu_lit_s0 750000 uV

vdd_log_s0 750000 uV

vdd_vdenc_s0 init 750000 uV

vdd_ddr_s0 850000 uV

###dw_mipi_dsi2_probe: start to get tc358775 GPIO:

###dw_mipi_dsi2_probe: linux-uboot-successfullly to get tc358775 GPIO:

get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts

get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts

get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts

get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts

Could not find baseparameter partition

Model: Rockchip RK3588 NEARDI LPA3588 Board

Rockchip UBOOT DRM driver version: v1.0.1

vp0 have layer nr:2[0 2 ], primary plane: 2

vp1 have layer nr:2[1 3 ], primary plane: 3

vp2 have layer nr:2[6 8 ], primary plane: 8

vp3 have layer nr:2[7 9 ], primary plane: 9

Using display timing dts

dsi@fde30000:  detailed mode clock 148500 kHz, flags[a]

    H: 1920 2008 2052 2200

    V: 1080 1084 1089 1125

bus_format: 100e

VOP update mode to: 1920x1080p60, type: MIPI1 for VP3

VP3 set crtc_clock to 148500KHz

VOP VP3 enable Esmart3[448x202->448x202@736x439] fmt[1] addr[0xedf43000]

final DSI-Link bandwidth: 990000 Kbps x 4

hdmi@fde80000 disconnected

CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)

  b0pll 24000 KHz

  b1pll 24000 KHz

  lpll 24000 KHz

  v0pll 24000 KHz

  aupll 786431 KHz

  cpll 1500000 KHz

  gpll 1188000 KHz

  npll 850000 KHz

  ppll 1100000 KHz

  aclk_center_root 702000 KHz

  pclk_center_root 100000 KHz

  hclk_center_root 396000 KHz

  aclk_center_low_root 500000 KHz

  aclk_top_root 594000 KHz

  pclk_top_root 100000 KHz

  aclk_low_top_root 396000 KHz

Net:   eth1: ethernet@fe1c0000

Hit key to stop autoboot('CTRL+C'):  0

ANDROID: reboot reason: "(none)"

optee api revision: 2.0

TEEC: Waring: Could not find security partition

Not AVB images, AVB skip

No valid android hdr

Android image load failed

Android boot failed, error -1.

## Booting FIT Image at 0xe9320200 with size 0x024d9000

Fdt Ramdisk skip relocation

## Loading kernel from FIT Image at e9320200 ...

   Using 'conf' configuration

## Verified-boot: 0

   Trying 'kernel' kernel subimage

     Description:  unavailable

     Type:         Kernel Image

     Compression:  uncompressed

     Data Start:   0xe9348800

     Data Size:    38472192 Bytes = 36.7 MiB

     Architecture: AArch64

     OS:           Linux

     Load Address: 0x00400000

     Entry Point:  0x00400000

     Hash algo:    sha256

     Hash value:   94a61efafcd7ffc61b934e64b8c7a45b1bc3202c23867a2e4a8221c7b0bf5b3d

   Verifying Hash Integrity ... sha256+ OK

## Loading fdt from FIT Image at e9320200 ...

   Using 'conf' configuration

   Trying 'fdt' fdt subimage

     Description:  unavailable

     Type:         Flat Device Tree

     Compression:  uncompressed

     Data Start:   0xe9320a00

     Data Size:    162821 Bytes = 159 KiB

     Architecture: AArch64

     Load Address: 0x08300000

     Hash algo:    sha256

     Hash value:   309d50683ea2c837d126ed01d04cff81dd45ed955f96c3c0918bb959be160c9b

   Verifying Hash Integrity ... sha256+ OK

   Loading fdt from 0x08300000 to 0x08300000

   Booting using the fdt blob at 0x08300000

   Loading Kernel Image from 0xe9348800 to 0x00400000 ... OK

   kernel loaded at 0x00400000, end = 0x028b0a00

  'reserved-memory' cma: addr=10000000 size=10000000

  'reserved-memory' ramoops@110000: addr=110000 size=f0000

   Using Device Tree in place at 0000000008300000, end 000000000832b9d3

Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)

Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)

Total: 1851.989 ms

Starting kernel ...

[    1.978964] Booting Linux on physical CPU 0x0000000000 [0x412fd050]

[    1.978984] Linux version 5.10.110 (sundongya@ubuntu2004) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #659 SMP Mon May 22 18:25:54 CST 2023

[    1.986485] Machine model: Rockchip RK3588 NEARDI LPA3588 Board

[    1.986552] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')

[    1.990634] printk: bootconsole [uart8250] enabled

[    1.992816] efi: UEFI not found.

[    1.997166] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB

[    1.998283] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB

[    1.998998] OF: reserved mem: initialized node cma, compatible id shared-dma-pool

[    2.059970] Zone ranges:

[    2.060201]   DMA      [mem 0x0000000000200000-0x00000000efffffff]

[    2.060755]   DMA32    empty

[    2.061012]   Normal   empty

[    2.061271] Movable zone start for each node

[    2.061650] Early memory node ranges

[    2.061967]   node   0: [mem 0x0000000000200000-0x00000000083fffff]

[    2.062526]   node   0: [mem 0x0000000009400000-0x00000000efffffff]

[    2.063086] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]

[    2.084346] psci: probing for conduit method from DT.

[    2.084803] psci: PSCIv1.1 detected in firmware.

[    2.085214] psci: Using standard PSCI v0.2 function IDs

[    2.085682] psci: Trusted OS migration not required

[    2.086117] psci: SMC Calling Convention v1.2

[    2.086831] percpu: Embedded 30 pages/cpu s83608 r8192 d31080 u122880

[    2.087574] Detected VIPT I-cache on CPU0

[    2.087969] CPU features: detected: GIC system register CPU interface

[    2.088539] CPU features: detected: Virtualization Host Extensions

[    2.089091] CPU features: detected: ARM errata 1165522, 1319367, or 1530923

[    2.089717] alternatives: patching kernel code

[    2.091948] Built 1 zonelists, mobility grouping on.  Total pages: 963080

[    2.092558] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000

[    2.095160] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)

[    2.096054] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)

[    2.096742] mem auto-init: stack:off, heap alloc:off, heap free:off

[    2.126772] Memory: 3535068K/3913728K available (20736K kernel code, 3458K rwdata, 6368K rodata, 6912K init, 571K bss, 116516K reserved, 262144K cma-reserved)

[    2.128140] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[    2.128746] ftrace: allocating 61626 entries in 241 pages

[    2.208132] ftrace: allocated 241 pages with 5 groups

[    2.208816] rcu: Hierarchical RCU implementation.

[    2.209239] rcu:     RCU event tracing is enabled.

[    2.209642]  Rude variant of Tasks RCU enabled.

[    2.210046] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.

[    2.215054] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[    2.217328] GICv3: GIC: Using split EOI/Deactivate mode

[    2.217798] GICv3: 480 SPIs implemented

[    2.218139] GICv3: 0 Extended SPIs implemented

[    2.218558] GICv3: Distributor has no Range Selector support

[    2.219063] GICv3: 16 PPIs implemented

[    2.219437] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000

[    2.220137] ITS [mem 0xfe640000-0xfe65ffff]

[    2.220554] ITS@0x00000000fe640000: allocated 8192 Devices @3000000 (indirect, esz 8, psz 64K, shr 0)

[    2.221389] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @3010000 (flat, esz 2, psz 64K, shr 0)

[    2.222294] ITS: using cache flushing for cmd queue

[    2.222749] ITS [mem 0xfe660000-0xfe67ffff]

[    2.223154] ITS@0x00000000fe660000: allocated 8192 Devices @3030000 (indirect, esz 8, psz 64K, shr 0)

[    2.223985] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @3040000 (flat, esz 2, psz 64K, shr 0)

[    2.224887] ITS: using cache flushing for cmd queue

[    2.225445] GICv3: using LPI property table @0x0000000003050000

[    2.226068] GIC: using cache flushing for LPI property table

[    2.226576] GICv3: CPU0: using allocated LPI pending table @0x0000000003060000

[    2.227342] random: get_random_bytes called from start_kernel+0x3e8/0x648 with crng_init=0

[    2.333177] arch_timer: cp15 timer(s) running at 24.00MHz (phys).

[    2.334484] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    2.335467] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    2.337104] Console: colour dummy device 100x100

[    2.337546] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)

[    2.338482] pid_max: default: 32768 minimum: 301

[    2.339012] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)

[    2.339693] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)

[    2.341636] rcu: Hierarchical SRCU implementation.

[    2.342724] Platform MSI: msi-controller@fe640000 domain created

[    2.343282] Platform MSI: msi-controller@fe660000 domain created

[    2.344086] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created

[    2.344848] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created

[    2.345696] EFI services will not be available.

[    2.346350] smp: Bringing up secondary CPUs ...

I/TC: Secondary CPU 1 initializing

I/TC: Secondary CPU 1 switching to normal world boot

I/TC: Secondary CPU 2 initializing

I/TC: Secondary CPU 2 switching to normal world boot

I/TC: Secondary CPU 3 initializing

I/TC: Secondary CPU 3 switching to normal world boot

I/TC: Secondary CPU 4 initializing

I/TC: Secondary CPU 4 switching to normal world boot

I/TC: Secondary CPU 5 initializing

I/TC: Secondary CPU 5 switching to normal world boot

I/TC: Secondary CPU 6 initializing

I/TC: Secondary CPU 6 switching to normal world boot

I/TC: Secondary CPU 7 initializing

I/TC: Secondary CPU 7 switching to normal world boot

[    2.347856] Detected VIPT I-cache on CPU1

[    2.347883] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000

[    2.347895] GICv3: CPU1: using allocated LPI pending table @0x0000000003070000

[    2.347933] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]

[    2.349066] Detected VIPT I-cache on CPU2

[    2.349086] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000

[    2.349098] GICv3: CPU2: using allocated LPI pending table @0x0000000003080000

[    2.349133] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]

[    2.350244] Detected VIPT I-cache on CPU3

[    2.350262] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000

[    2.350273] GICv3: CPU3: using allocated LPI pending table @0x0000000003090000

[    2.350305] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]

[    2.351444] CPU features: detected: Spectre-v4

[    2.351447] CPU features: detected: Spectre-BHB

[    2.351448] Detected PIPT I-cache on CPU4

[    2.351459] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000

[    2.351466] GICv3: CPU4: using allocated LPI pending table @0x00000000030a0000

[    2.351487] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]

[    2.352547] Detected PIPT I-cache on CPU5

[    2.352558] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000

[    2.352565] GICv3: CPU5: using allocated LPI pending table @0x00000000030b0000

[    2.352587] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]

[    2.353669] Detected PIPT I-cache on CPU6

[    2.353680] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000

[    2.353687] GICv3: CPU6: using allocated LPI pending table @0x00000000030c0000

[    2.353708] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]

[    2.354781] Detected PIPT I-cache on CPU7

[    2.354793] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000

[    2.354799] GICv3: CPU7: using allocated LPI pending table @0x00000000030d0000

[    2.354821] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]

[    2.354871] smp: Brought up 1 node, 8 CPUs

[    2.371787] SMP: Total of 8 processors activated.

[    2.372221] CPU features: detected: Privileged Access Never

[    2.372728] CPU features: detected: User Access Override

[    2.373211] CPU features: detected: 32-bit EL0 Support

[    2.373678] CPU features: detected: Common not Private translations

[    2.374248] CPU features: detected: RAS Extension Support

[    2.374738] CPU features: detected: Data cache clean to the PoU not required for I/D coherence

[    2.375520] CPU features: detected: CRC32 instructions

[    2.375992] CPU features: detected: Speculative Store Bypassing Safe (SSBS)

[    2.376626] CPU features: detected: RCpc load-acquire (LDAPR)

[    2.377216] CPU: All CPU(s) started at EL2

[    2.378546] devtmpfs: initialized

[    2.385934] Registered cp15_barrier emulation handler

[    2.386396] Registered setend emulation handler

[    2.386867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    2.387752] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[    2.390212] pinctrl core: initialized pinctrl subsystem

[    2.390894] DMI not present or invalid.

[    2.391334] NET: Registered protocol family 16

[    2.392514] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations

[    2.393218] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[    2.394331] thermal_sys: Registered thermal governor 'fair_share'

[    2.394334] thermal_sys: Registered thermal governor 'step_wise'

[    2.394886] thermal_sys: Registered thermal governor 'user_space'

[    2.395435] thermal_sys: Registered thermal governor 'power_allocator'

[    2.396085] thermal thermal_zone1: power_allocator: sustainable_power will be estimated

[    2.397415] thermal thermal_zone2: power_allocator: sustainable_power will be estimated

[    2.398156] thermal thermal_zone3: power_allocator: sustainable_power will be estimated

[    2.398899] thermal thermal_zone4: power_allocator: sustainable_power will be estimated

[    2.399640] thermal thermal_zone5: power_allocator: sustainable_power will be estimated

[    2.400382] thermal thermal_zone6: power_allocator: sustainable_power will be estimated

[    2.401117] cpuidle: using governor menu

[    2.401476] Registered FIQ tty driver

[    2.401878] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    2.402575] ASID allocator initialised with 65536 entries

[    2.404041] ramoops: dmesg-0 0x20000@0x0000000000110000

[    2.404523] ramoops: console 0x80000@0x0000000000130000

[    2.405004] ramoops: pmsg    0x50000@0x00000000001b0000

[    2.405661] printk: console [ramoops-1] enabled

[    2.406079] pstore: Registered ramoops as persistent store backend

[    2.406639] ramoops: using 0xf0000@0x110000, ecc: 0

[    2.436791] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000

[    2.437539] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000

[    2.438277] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000

[    2.439021] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000

[    2.439773] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000

[    2.440381] rockchip-pinctrl pinctrl: probed pinctrl

[    2.506126] raid6: neonx8   gen()  5846 MB/s

[    2.562843] raid6: neonx8   xor()  4611 MB/s

[    2.619562] raid6: neonx4   gen()  5771 MB/s

[    2.676277] raid6: neonx4   xor()  4815 MB/s

[    2.732994] raid6: neonx2   gen()  5504 MB/s

[    2.789710] raid6: neonx2   xor()  4351 MB/s

[    2.846429] raid6: neonx1   gen()  4528 MB/s

[    2.903143] raid6: neonx1   xor()  3790 MB/s

[    2.959860] raid6: int64x8  gen()  2735 MB/s

[    3.016578] raid6: int64x8  xor()  1620 MB/s

[    3.073292] raid6: int64x4  gen()  3076 MB/s

[    3.130014] raid6: int64x4  xor()  1620 MB/s

[    3.186729] raid6: int64x2  gen()  2614 MB/s

[    3.243450] raid6: int64x2  xor()  1411 MB/s

[    3.300171] raid6: int64x1  gen()  2144 MB/s

[    3.356882] raid6: int64x1  xor()  1125 MB/s

[    3.357270] raid6: using algorithm neonx8 gen() 5846 MB/s

[    3.357760] raid6: .... xor() 4611 MB/s, rmw enabled

[    3.358210] raid6: using neon recovery algorithm

[    3.359030] fiq_debugger fiq_debugger.0: IRQ fiq not found

[    3.359530] fiq_debugger fiq_debugger.0: IRQ wakeup not found

[    3.360052] fiq_debugger_probe: could not install nmi irq handler

[[    3.360656] printk: console [ttyFIQ0] enabled

    3.360656] printk: console [ttyFIQ0] enabled

[    3.361428] printk: bootconsole [uart8250] disabled

[    3.361428] printk: bootconsole [uart8250] disabled

[    3.361937] Registered fiq debugger ttyFIQ0

[    3.362181] vcc5v0_sys: supplied by vcc12v_dcin

[    3.362259] vcc5v0_usbdcin: supplied by vcc12v_dcin

[    3.362333] vcc5v0_usb: supplied by vcc5v0_usbdcin

[    3.362439] vcc_1v1_nldo_s3: supplied by vcc5v0_sys

[    3.362588] vbus5v0_typec: supplied by vcc5v0_usb

[    3.362669] vcc3v3_pcie30: supplied by vcc12v_dcin

[    3.362763] vcc5v0_host: supplied by vcc5v0_usb

[    3.363069] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!

[    3.363076] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!

[    3.363514] iommu: Default domain type: Translated

[    3.363568] rk_iommu fdab9000.iommu: version = 2

[    3.363820] rk_iommu fdb50800.iommu: version = 2

[    3.364000] rk_iommu fdb60f00.iommu: version = 2

[    3.364129] rk_iommu fdb70f00.iommu: version = 2

[    3.364251] rk_iommu fdb90480.iommu: version = 2

[    3.364389] rk_iommu fdba0800.iommu: version = 2

[    3.364529] rk_iommu fdba4800.iommu: version = 2

[    3.364665] rk_iommu fdba8800.iommu: version = 2

[    3.364805] rk_iommu fdbac800.iommu: version = 2

[    3.364944] rk_iommu fdbb0800.iommu: version = 2

[    3.365080] rk_iommu fdbdf000.iommu: version = 2

[    3.365276] rk_iommu fdbef000.iommu: version = 2

[    3.365491] rk_iommu fdc38700.iommu: version = 2

[    3.365712] rk_iommu fdc48700.iommu: version = 2

[    3.365866] rk_iommu fdcb7f00.iommu: version = 2

[    3.366046] rk_iommu fdcc7f00.iommu: version = 2

[    3.366185] rk_iommu fdce0800.iommu: version = 2

[    3.366260] rk_iommu fdd97e00.iommu: version = 2

[    3.366485] SCSI subsystem initialized

[    3.366543] usbcore: registered new interface driver usbfs

[    3.366554] usbcore: registered new interface driver hub

[    3.366565] usbcore: registered new device driver usb

[    3.366590] mc: Linux media interface: v0.10

[    3.366598] videodev: Linux video capture interface: v2.00

[    3.366615] pps_core: LinuxPPS API ver. 1 registered

[    3.366618] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    3.366623] PTP clock support registered

[    3.366812] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.

[    3.366840] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0

[    3.367584] Advanced Linux Sound Architecture Driver Initialized.

[    3.367722] Bluetooth: Core ver 2.22

[    3.367730] NET: Registered protocol family 31

[    3.367733] Bluetooth: HCI device and connection manager initialized

[    3.367737] Bluetooth: HCI socket layer initialized

[    3.367741] Bluetooth: L2CAP socket layer initialized

[    3.367746] Bluetooth: SCO socket layer initialized

[    3.368994] rockchip-cpuinfo cpuinfo: SoC            : 35880000

[    3.368999] rockchip-cpuinfo cpuinfo: Serial         : 285cf00dac8c2a2e

[    3.369204] clocksource: Switched to clocksource arch_sys_counter

[    3.610503] NET: Registered protocol family 2

[    3.610571] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)

[    3.611568] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)

[    3.611606] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)

[    3.611769] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)

[    3.612086] TCP: Hash tables configured (established 32768 bind 32768)

[    3.612121] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)

[    3.612182] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)

[    3.612281] NET: Registered protocol family 1

[    3.612485] RPC: Registered named UNIX socket transport module.

[    3.612489] RPC: Registered udp transport module.

[    3.612492] RPC: Registered tcp transport module.

[    3.612495] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    3.612756] PCI: CLS 0 bytes, default 64

[    3.613358] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[    3.614750] Initialise system trusted keyrings

[    3.614793] workingset: timestamp_bits=46 max_order=20 bucket_order=0

[    3.616267] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    3.616444] NFS: Registering the id_resolver key type

[    3.616453] Key type id_resolver registered

[    3.616456] Key type id_legacy registered

[    3.616467] ntfs: driver 2.1.32 [Flags: R/O].

[    3.616524] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.

[    3.616610] fuse: init (API version 7.32)

[    3.616695] SGI XFS with security attributes, no debug enabled

[    3.636231] NET: Registered protocol family 38

[    3.636237] xor: measuring software checksum speed

[    3.637589]    8regs           :  7304 MB/sec

[    3.638715]    32regs          :  8763 MB/sec

[    3.639562]    arm64_neon      : 11776 MB/sec

[    3.639566] xor: using function: arm64_neon (11776 MB/sec)

[    3.639570] Key type asymmetric registered

[    3.639573] Asymmetric key parser 'x509' registered

[    3.639584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)

[    3.639626] io scheduler mq-deadline registered

[    3.639631] io scheduler kyber registered

[    3.645707] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success

[    3.646248] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success

[    3.648216] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node

[    3.648281] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node

[    3.648303] rk-pcie fe170000.pcie: no vpcie3v3 regulator found

[    3.648339] pwm-backlight backlight: supply power not found, using dummy regulator

[    3.648539] rk-pcie fe170000.pcie: missing legacy IRQ resource

[    3.648557] rk-pcie fe170000.pcie: IRQ msi not found

[    3.648565] rk-pcie fe170000.pcie: use outband MSI support

[    3.648572] rk-pcie fe170000.pcie: Missing *config* reg space

[    3.648581] iep: Module initialized.

[    3.648586] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:

[    3.648606] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000

[    3.648615] mpp_service mpp-srv: 6d935d9f2 author: slxia 2022-10-30 bba7b09: rk3588_linux_release_v1.0.4_20221020.xml

[    3.648619] mpp_service mpp-srv: probe start

[    3.648623] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000

[    3.648635] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000

[    3.648647] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000

[    3.648675] rk-pcie fe170000.pcie: Missing *config* reg space

[    3.648703] rk-pcie fe170000.pcie: invalid resource

[    3.649519] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1

[    3.649688] mpp_vdpu2 fdb50400.vdpu: probe device

[    3.649766] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0

[    3.649771] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0

[    3.649831] mpp_vdpu2 fdb50400.vdpu: probing finish

[    3.649977] mpp_vepu2 jpege-ccu: probing start

[    3.649981] mpp_vepu2 jpege-ccu: probing finish

[    3.650063] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5

[    3.650189] mpp_vepu2 fdba0000.jpege-core: probing start

[    3.650267] mpp_vepu2 fdba0000.jpege-core: attach ccu success

[    3.650324] mpp_vepu2 fdba0000.jpege-core: probing finish

[    3.650400] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6

[    3.650526] mpp_vepu2 fdba4000.jpege-core: probing start

[    3.650600] mpp_vepu2 fdba4000.jpege-core: attach ccu success

[    3.650654] mpp_vepu2 fdba4000.jpege-core: probing finish

[    3.650729] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7

[    3.650854] mpp_vepu2 fdba8000.jpege-core: probing start

[    3.650926] mpp_vepu2 fdba8000.jpege-core: attach ccu success

[    3.650979] mpp_vepu2 fdba8000.jpege-core: probing finish

[    3.651053] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8

[    3.651173] mpp_vepu2 fdbac000.jpege-core: probing start

[    3.651241] mpp_vepu2 fdbac000.jpege-core: attach ccu success

[    3.651294] mpp_vepu2 fdbac000.jpege-core: probing finish

[    3.651496] mpp-iep2 fdbb0000.iep: Adding to iommu group 9

[    3.651615] mpp-iep2 fdbb0000.iep: probe device

[    3.651701] mpp-iep2 fdbb0000.iep: allocate roi buffer failed

[    3.651748] mpp-iep2 fdbb0000.iep: probing finish

[    3.651906] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4

[    3.652080] mpp_jpgdec fdb90000.jpegd: probe device

[    3.652211] mpp_jpgdec fdb90000.jpegd: probing finish

[    3.652474] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start

[    3.652513] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish

[    3.652574] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12

[    3.652787] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start

[    3.652864] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!

[    3.652868] rkvdec2_init:1008: No niu aclk reset resource define

[    3.652871] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!

[    3.652874] rkvdec2_init:1011: No niu hclk reset resource define

[    3.652890] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled

[    3.652922] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001

[    3.652925] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0

[    3.653054] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000

[    3.653057] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000

[    3.653060] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520

[    3.653063] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576

[    3.653067] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512

[    3.653088] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish

[    3.653144] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13

[    3.653335] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start

[    3.653413] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!

[    3.653416] rkvdec2_init:1008: No niu aclk reset resource define

[    3.653419] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!

[    3.653422] rkvdec2_init:1011: No niu hclk reset resource define

[    3.653436] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled

[    3.653467] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002

[    3.653483] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1

[    3.653628] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000

[    3.653631] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000

[    3.653634] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424

[    3.653638] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576

[    3.653641] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512

[    3.653662] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish

[    3.653791] mpp_rkvenc2 rkvenc-ccu: probing start

[    3.653795] mpp_rkvenc2 rkvenc-ccu: probing finish

[    3.653874] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10

[    3.654028] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start

[    3.654041] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8

[    3.654147] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0

[    3.654208] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish

[    3.654255] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11

[    3.654458] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start

[    3.654469] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8

[    3.654591] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1

[    3.654647] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish

[    3.655011] mpp_av1dec: Adding child /av1d@fdc70000

[    3.655169] mpp_av1dec: register device av1d-master

[    3.655182] mpp_av1dec av1d-master: av1_iommu_of_xlate,784

[    3.655195] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu

[    3.655201] mpp_av1dec av1d-master: Adding to iommu group 18

[    3.655392] mpp_av1dec av1d-master: probing start

[    3.655529] mpp_av1dec av1d-master: probing finish

[    3.655552] mpp_service mpp-srv: probe success

[    3.660885] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330

[    3.660891] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    3.661475] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330

[    3.661481] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    3.662074] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330

[    3.662079] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    3.662351] rockchip-pvtm fda40000.pvtm: pvtm@0 probed

[    3.662392] rockchip-pvtm fda50000.pvtm: pvtm@1 probed

[    3.662427] rockchip-pvtm fda60000.pvtm: pvtm@2 probed

[    3.662460] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed

[    3.662492] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed

[    3.662892] rockchip-system-monitor rockchip-system-monitor: system monitor probe

[    3.663477] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled

[    3.663807] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 28, base_baud = 1500000) is a 16550A

[    3.664117] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 100, base_baud = 1500000) is a 16550A

[    3.664306] feba0000.serial: ttyS7 at MMIO 0xfeba0000 (irq = 101, base_baud = 1500000) is a 16550A

[    3.664527] rk-pcie fe150000.pcie: missing legacy IRQ resource

[    3.664538] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 102, base_baud = 1500000) is a 16550A

[    3.664554] rk-pcie fe150000.pcie: IRQ msi not found

[    3.664563] rk-pcie fe150000.pcie: use outband MSI support

[    3.664572] rk-pcie fe150000.pcie: Missing *config* reg space

[    3.664589] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:

[    3.664612] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000

[    3.664632] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000

[    3.664660] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000

[    3.664678] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000

[    3.664716] rk-pcie fe150000.pcie: Missing *config* reg space

[    3.664751] rk-pcie fe150000.pcie: invalid resource

[    3.665370] random: fast init done

[    3.665451] random: crng init done

[    3.665979] rockchip-vop2 fdd90000.vop: Adding to iommu group 17

[    3.671755] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2

[    3.671764] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3

[    3.671775] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8

[    3.671781] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9

[    3.671787] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2

[    3.671791] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2

[    3.671956] [drm] failed to init overlay plane Cluster0-win1

[    3.671981] [drm] failed to init overlay plane Cluster1-win1

[    3.672004] [drm] failed to init overlay plane Cluster2-win1

[    3.672026] [drm] failed to init overlay plane Cluster3-win1

[    3.679255] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc01155f4e0)

[    3.679720] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver

[    3.679824] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0115673e8)

[    3.680208] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver

[    3.680302] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc0115673e8)

[    3.680333] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517

[    3.684477] panel-simple-dsi fde30000.dsi.0: supply power not found, using dummy regulator

[    3.686442] brd: module loaded

[    3.688699] loop: module loaded

[    3.688837] zram: Added device: zram0

[    3.688936] lkdtm: No crash points registered, enable through debugfs

[    3.689995] ahci fe210000.sata: supply ahci not found, using dummy regulator

[    3.690040] ahci fe210000.sata: supply phy not found, using dummy regulator

[    3.690086] ahci fe210000.sata: supply target not found, using dummy regulator

[    3.690138] ahci fe210000.sata: forcing port_map 0x0 -> 0x1

[    3.690157] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode

[    3.690163] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst

[    3.690171] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP

[    3.690822] scsi host0: ahci

[    3.690924] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 84

[    3.691704] rockchip-spi feb20000.spi: no high_speed pinctrl state

[    3.692542] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1

[    3.692662] rk806 spi2.0: ON: 0x40 OFF:0x0

[    3.694000] vdd_gpu_s0: supplied by vcc5v0_sys

[    3.694957] vdd_cpu_lit_s0: supplied by vcc5v0_sys

[    3.695503] vdd_log_s0: supplied by vcc5v0_sys

[    3.696003] vdd_vdenc_s0: supplied by vcc5v0_sys

[    3.696552] vdd_ddr_s0: supplied by vcc5v0_sys

[    3.696866] vdd2_ddr_s3: supplied by vcc5v0_sys

[    3.697349] vdd_2v0_pldo_s3: supplied by vcc5v0_sys

[    3.697782] vcc_3v3_s3: supplied by vcc5v0_sys

[    3.698195] vddq_ddr_s0: supplied by vcc5v0_sys

[    3.698675] vcc_1v8_s3: supplied by vcc5v0_sys

[    3.699167] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3

[    3.699666] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3

[    3.700087] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3

[    3.700515] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3

[    3.700946] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3

[    3.701443] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3

[    3.701985] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3

[    3.702462] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3

[    3.702958] vcc_3v3_s0: supplied by vcc5v0_sys

[    3.703382] vccio_sd_s0: supplied by vcc5v0_sys

[    3.703816] pldo6_s3: supplied by vcc5v0_sys

[    3.704201] rk806 spi2.0: no sleep-setting state

[    3.704206] rk806 spi2.0: no reset-setting pinctrl state

[    3.704210] rk806 spi2.0: no dvs-setting pinctrl state

[    3.706107] CAN device driver interface

[    3.707329] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found

[    3.707432] rk_gmac-dwmac fe1c0000.ethernet: no regulator found

[    3.707437] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (input).

[    3.707442] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x44).

[    3.707446] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.

[    3.707450] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff

[    3.707463] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).

[    3.707469] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx

[    3.707474] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx

[    3.707483] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed

[    3.707486] rk_gmac-dwmac fe1c0000.ethernet: clock input from PHY

[    3.707699] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID

[    3.707779] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51

[    3.707784] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5

[    3.707789] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported

[    3.707793] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported

[    3.707797] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported

[    3.707801] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported

[    3.707826] rk_gmac-dwmac fe1c0000.ethernet: TSO supported

[    3.707829] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer

[    3.707834] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)

[    3.707838] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled

[    3.707842] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width

[    3.840537] PPP generic driver version 2.4.2

[    3.840629] PPP BSD Compression module registered

[    3.840633] PPP Deflate Compression module registered

[    3.840646] PPP MPPE Compression module registered

[    3.840651] NET: Registered protocol family 24

[    3.840686] usbcore: registered new interface driver rtl8150

[    3.840700] usbcore: registered new interface driver r8152

[    3.840712] usbcore: registered new interface driver asix

[    3.840725] usbcore: registered new interface driver ax88179_178a

[    3.840736] usbcore: registered new interface driver cdc_ether

[    3.840747] usbcore: registered new interface driver net1080

[    3.840758] usbcore: registered new interface driver cdc_subset

[    3.840768] usbcore: registered new interface driver zaurus

[    3.840785] usbcore: registered new interface driver cdc_ncm

[    3.840798] usbcore: registered new interface driver qmi_wwan_q

[    3.855268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    3.855325] ehci-pci: EHCI PCI platform driver

[    3.855384] ehci-platform: EHCI generic platform driver

[    3.857760] ehci-platform fc800000.usb: EHCI Host Controller

[    3.857909] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1

[    3.858004] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000

[    3.869230] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00

[    3.869398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    3.869410] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.869419] usb usb1: Product: EHCI Host Controller

[    3.869428] usb usb1: Manufacturer: Linux 5.10.110 ehci_hcd

[    3.869437] usb usb1: SerialNumber: fc800000.usb

[    3.869814] hub 1-0:1.0: USB hub found

[    3.869848] hub 1-0:1.0: 1 port detected

[    3.870339] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    3.872496] ehci-platform fc880000.usb: EHCI Host Controller

[    3.872652] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2

[    3.872743] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000

[    3.885896] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00

[    3.886042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    3.886054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.886064] usb usb2: Product: EHCI Host Controller

[    3.886072] usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd

[    3.886081] usb usb2: SerialNumber: fc880000.usb

[    3.886425] hub 2-0:1.0: USB hub found

[    3.886457] hub 2-0:1.0: 1 port detected

[    3.887176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    3.887196] ohci-platform: OHCI generic platform driver

[    3.887435] ohci-platform fc840000.usb: Generic Platform OHCI controller

[    3.887573] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3

[    3.887652] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000

[    3.895889] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    3.909232] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011

[    3.909361] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20

[    3.909375] pci_bus 0002:20: root bus resource [bus 20-2f]

[    3.909387] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]

[    3.909399] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])

[    3.909409] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]

[    3.909419] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]

[    3.909457] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400

[    3.909485] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]

[    3.909547] pci 0002:20:00.0: supports D1 D2

[    3.909557] pci 0002:20:00.0: PME# supported from D0 D1 D3hot

[    3.917567] pci 0002:20:00.0: Primary bus is hard wired to 0

[    3.917586] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring

[    3.917802] pci 0002:21:00.0: [10ec:8168] type 00 class 0x020000

[    3.917877] pci 0002:21:00.0: reg 0x10: initial BAR value 0x00000000 invalid

[    3.917887] pci 0002:21:00.0: reg 0x10: [io  size 0x0100]

[    3.917976] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]

[    3.918036] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]

[    3.918471] pci 0002:21:00.0: supports D1 D2

[    3.918481] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    3.922561] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    3.933668] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21

[    3.933707] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]

[    3.933720] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]

[    3.933731] pci 0002:20:00.0: BAR 7: assigned [io  0x1000-0x1fff]

[    3.933746] pci 0002:21:00.0: BAR 4: assigned [mem 0xf2200000-0xf2203fff 64bit]

[    3.933798] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2204000-0xf2204fff 64bit]

[    3.933848] pci 0002:21:00.0: BAR 0: assigned [io  0x1000-0x10ff]

[    3.933870] pci 0002:20:00.0: PCI bridge to [bus 21]

[    3.933880] pci 0002:20:00.0:   bridge window [io  0x1000-0x1fff]

[    3.933891] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf22fffff]

[    3.936229] pcieport 0002:20:00.0: PME: Signaling with IRQ 158

[    3.936438] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded

[    3.936491] r8168 0002:21:00.0: enabling device (0000 -> 0003)

[    3.946606] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10

[    3.946615] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    3.946619] usb usb3: Product: Generic Platform OHCI controller

[    3.946623] usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd

[    3.946626] usb usb3: SerialNumber: fc840000.usb

[    3.946807] hub 3-0:1.0: USB hub found

[    3.946819] hub 3-0:1.0: 1 port detected

[    3.947007] ohci-platform fc8c0000.usb: Generic Platform OHCI controller

[    3.947072] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4

[    3.947106] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000

[    3.949224] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    3.952734] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00

[    3.952755] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Random ether addr 12:be:f6:af:45:3f

[    3.953186] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[    3.955271] r8168  Copyright (C) 2021 Realtek NIC software team <nicfae@realtek.com>

[    3.955271]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.

[    3.955271]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.

[    3.975891] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.002009] ata1: SATA link down (SStatus 0 SControl 300)

[    4.002553] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.006592] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10

[    4.006599] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    4.006603] usb usb4: Product: Generic Platform OHCI controller

[    4.006607] usb usb4: Manufacturer: Linux 5.10.110 ohci_hcd

[    4.006611] usb usb4: SerialNumber: fc8c0000.usb

[    4.006774] hub 4-0:1.0: USB hub found

[    4.006785] hub 4-0:1.0: 1 port detected

[    4.007198] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller

[    4.007264] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5

[    4.007329] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002010010

[    4.007349] xhci-hcd xhci-hcd.5.auto: irq 147, io mem 0xfcd00000

[    4.007435] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    4.007439] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    4.007443] usb usb5: Product: xHCI Host Controller

[    4.007447] usb usb5: Manufacturer: Linux 5.10.110 xhci-hcd

[    4.007450] usb usb5: SerialNumber: xhci-hcd.5.auto

[    4.007602] hub 5-0:1.0: USB hub found

[    4.007613] hub 5-0:1.0: 1 port detected

[    4.007698] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller

[    4.007764] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6

[    4.007773] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed

[    4.007791] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.

[    4.007821] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10

[    4.007825] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    4.007828] usb usb6: Product: xHCI Host Controller

[    4.007832] usb usb6: Manufacturer: Linux 5.10.110 xhci-hcd

[    4.007836] usb usb6: SerialNumber: xhci-hcd.5.auto

[    4.007982] hub 6-0:1.0: USB hub found

[    4.007993] hub 6-0:1.0: 1 port detected

[    4.008136] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode

[    4.008143] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller

[    4.008204] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 7

[    4.008280] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002010010

[    4.008299] xhci-hcd xhci-hcd.6.auto: irq 148, io mem 0xfc400000

[    4.008390] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    4.008395] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    4.008398] usb usb7: Product: xHCI Host Controller

[    4.008402] usb usb7: Manufacturer: Linux 5.10.110 xhci-hcd

[    4.008406] usb usb7: SerialNumber: xhci-hcd.6.auto

[    4.008563] hub 7-0:1.0: USB hub found

[    4.008573] hub 7-0:1.0: 1 port detected

[    4.008657] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller

[    4.008715] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 8

[    4.008721] xhci-hcd xhci-hcd.6.auto: Host supports USB 3.0 SuperSpeed

[    4.008745] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.

[    4.008774] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10

[    4.008778] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    4.008782] usb usb8: Product: xHCI Host Controller

[    4.008786] usb usb8: Manufacturer: Linux 5.10.110 xhci-hcd

[    4.008789] usb usb8: SerialNumber: xhci-hcd.6.auto

[    4.008932] hub 8-0:1.0: USB hub found

[    4.008942] hub 8-0:1.0: 1 port detected

[    4.009071] usbcore: registered new interface driver cdc_acm

[    4.009074] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    4.009088] usbcore: registered new interface driver cdc_wdm

[    4.009159] usbcore: registered new interface driver uas

[    4.009210] usbcore: registered new interface driver usb-storage

[    4.009240] usbcore: registered new interface driver usbserial_generic

[    4.009249] usbserial: USB Serial support registered for generic

[    4.009263] usbcore: registered new interface driver cp210x

[    4.009270] usbserial: USB Serial support registered for cp210x

[    4.009296] usbcore: registered new interface driver ftdi_sio

[    4.009304] usbserial: USB Serial support registered for FTDI USB Serial Device

[    4.009372] usbcore: registered new interface driver keyspan

[    4.009380] usbserial: USB Serial support registered for Keyspan - (without firmware)

[    4.009387] usbserial: USB Serial support registered for Keyspan 1 port adapter

[    4.009396] usbserial: USB Serial support registered for Keyspan 2 port adapter

[    4.009403] usbserial: USB Serial support registered for Keyspan 4 port adapter

[    4.009419] usbcore: registered new interface driver option

[    4.009426] usbserial: USB Serial support registered for GSM modem (1-port)

[    4.009526] usbcore: registered new interface driver oti6858

[    4.009532] usbserial: USB Serial support registered for oti6858

[    4.009546] usbcore: registered new interface driver pl2303

[    4.009553] usbserial: USB Serial support registered for pl2303

[    4.009572] usbcore: registered new interface driver qcserial

[    4.009579] usbserial: USB Serial support registered for Qualcomm USB modem

[    4.009603] usbcore: registered new interface driver sierra

[    4.009610] usbserial: USB Serial support registered for Sierra USB modem

[    4.009933] usbcore: registered new interface driver usbtouchscreen

[    4.010754] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0

[    4.010960] i2c /dev entries driver

[    4.014326] vdd_cpu_big0_s0: supplied by vcc5v0_sys

[    4.021404] vdd_cpu_big1_s0: supplied by vcc5v0_sys

[    4.028900] vdd_npu_s0: supplied by vcc5v0_sys

[    4.029226] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.033361] aw9523 2-005a: aw9523 no platdata

[    4.050795] aw9523 2-005a: aw9523 detected: 0x23

[    4.051013] aw9523-leds: Failed to locate of_node [id: -1]

[    4.051065] aw9523-gpio: Failed to locate of_node [id: -1]

[    4.053106] aw9523-gpio aw9523-gpio: shield-switch missing 0

[    4.054741] aw9523-keypad: Failed to locate of_node [id: -1]

[    4.054997] dsi0 lt8912_parse_dt: DT property instance_id is 0

[    4.055035] lt8912_pwr_gpio= 1.

[    4.055041] lt8912_rst_gpio= 0

[    4.055894] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.082555] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.109219] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0

[    4.159203] lt8912_rst_gpio= 1

[    4.159208]  irq gpio not provided

[    4.189343] LT8912_VAL_CHIP_REVISION_0 successful,val = 0x12

[    4.189467] LT8912_VAL_CHIP_REVISION_1 successful,val = 0xb2

[    4.189471] lt8912 check chip successful.

[    4.190373] lt8912_enable: enabling default audio configs

[    4.190376] lt8912's 720P hdmi mode---.

[    4.259226] usb 7-1: new high-speed USB device number 2 using xhci-hcd

[    4.401660] usb 7-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91

[    4.401678] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.401687] usb 7-1: Product: USB2.1 Hub

[    4.401696] usb 7-1: Manufacturer: NearDi

[    4.457003] hub 7-1:1.0: USB hub found

[    4.457272] hub 7-1:1.0: 4 ports detected

[    4.522680] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd

[    4.541954] usb 8-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91

[    4.541972] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    4.541981] usb 8-1: Product: USB3.2 Hub

[    4.541989] usb 8-1: Manufacturer: NearDi

[    4.569009] hub 8-1:1.0: USB hub found

[    4.569322] hub 8-1:1.0: 4 ports detected

[    4.622533] lt8912's 720P init mode---.

[    4.625058] rtc-hym8563 6-0051: rtc information is invalid

[    4.631874] rtc-hym8563 6-0051: registered as rtc0

[    4.632893] rtc-hym8563 6-0051: setting system clock to 2021-01-01T12:00:00 UTC (1609502400)

[    4.634745] ttysWK0 at I/O 0x1 (irq = 161, base_baud = 460800) is a wk2xxx

[    4.634828] ttysWK1 at I/O 0x2 (irq = 161, base_baud = 460800) is a wk2xxx

[    4.634893] ttysWK2 at I/O 0x3 (irq = 161, base_baud = 460800) is a wk2xxx

[    4.634956] ttysWK3 at I/O 0x4 (irq = 161, base_baud = 460800) is a wk2xxx

[    4.646930] rkcifhw fdce0000.rkcif: Adding to iommu group 16

[    4.647428] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF

[    4.647560] rkcif rkcif-mipi-lvds: Adding to iommu group 16

[    4.647593] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a

[    4.647685] rkcif rkcif-mipi-lvds: attach to cif hw node

[    4.647696] rkcif rkcif-mipi-lvds: rkcif wait line 0

[    4.647705] : terminal subdev does not exist

[    4.647713] : terminal subdev does not exist

[    4.647720] : terminal subdev does not exist

[    4.647728] : terminal subdev does not exist

[    4.647736] : get_remote_sensor: video pad[0] is null

[    4.647744] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.647752] : get_remote_sensor: video pad[0] is null

[    4.647759] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.647767] : get_remote_sensor: video pad[0] is null

[    4.647774] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.647781] : get_remote_sensor: video pad[0] is null

[    4.647788] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.649153] rkcif rkcif-mipi-lvds: No memory-region-thunderboot specified

[    4.649303] rkcif rkcif-mipi-lvds1: Adding to iommu group 16

[    4.649338] rkcif rkcif-mipi-lvds1: rkcif driver version: v00.01.0a

[    4.649407] rkcif rkcif-mipi-lvds1: attach to cif hw node

[    4.649417] rkcif rkcif-mipi-lvds1: rkcif wait line 0

[    4.649426] : terminal subdev does not exist

[    4.649434] : terminal subdev does not exist

[    4.649441] : terminal subdev does not exist

[    4.649448] : terminal subdev does not exist

[    4.649456] : get_remote_sensor: video pad[0] is null

[    4.649463] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.649471] : get_remote_sensor: video pad[0] is null

[    4.649477] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.649485] : get_remote_sensor: video pad[0] is null

[    4.649492] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.649499] : get_remote_sensor: video pad[0] is null

[    4.649506] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    4.650807] rkcif rkcif-mipi-lvds1: No memory-region-thunderboot specified

[    4.651482] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!

[    4.651489] rockchip-mipi-csi2: Async registered subdev

[    4.651492] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds!

[    4.651569] rkcif rkcif-mipi-lvds1: Entity type for entity rockchip-mipi-csi2 was not initialized!

[    4.651574] rockchip-mipi-csi2: Async registered subdev

[    4.651577] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds1!

[    4.652043] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14

[    4.652187] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0

[    4.652192] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps

[    4.652196] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property

[    4.652256] rkisp_hw fdcb0000.rkisp: no find phandle sram

[    4.652343] rkisp_hw fdcc0000.rkisp: Adding to iommu group 15

[    4.652521] rkisp_hw fdcc0000.rkisp: is_thunderboot: 0

[    4.652525] rkisp_hw fdcc0000.rkisp: max input:0x0@0fps

[    4.652538] rkisp_hw fdcc0000.rkisp: Missing rockchip,grf property

[    4.652595] rkisp_hw fdcc0000.rkisp: no find phandle sram

[    4.652778] rkisp rkisp0-vir0: rkisp driver version: v02.00.00

[    4.652899] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!

[    4.653984] rkisp rkisp1-vir0: rkisp driver version: v02.00.00

[    4.654211] rkisp rkisp1-vir0: Entity type for entity rkisp-isp-subdev was not initialized!

[    4.656869] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA

[    4.656904] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5

[    4.657434] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0

[    4.658369] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success

[    4.658417] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!

[    4.658620] usbcore: registered new interface driver uvcvideo

[    4.658630] USB Video Class driver (1.1.1)

[    4.660741] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property

[    4.661343] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!

[    4.661683] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com

[    4.661980] Bluetooth: HCI UART driver ver 2.3

[    4.661993] Bluetooth: HCI UART protocol H4 registered

[    4.662000] Bluetooth: HCI UART protocol ATH3K registered

[    4.662063] usbcore: registered new interface driver bfusb

[    4.662115] usbcore: registered new interface driver btusb

[    4.662723] cpu cpu0: bin=0

[    4.662895] cpu cpu0: leakage=13

[    4.664291] cpu cpu0: pvtm=1496

[    4.664337] cpu cpu0: pvtm-volt-sel=4

[    4.665732] cpu cpu4: bin=0

[    4.665901] cpu cpu4: leakage=11

[    4.671453] cpu cpu4: pvtm=1725

[    4.675100] cpu cpu4: pvtm-volt-sel=5

[    4.676799] cpu cpu6: bin=0

[    4.676983] cpu cpu6: leakage=11

[    4.682717] cpu cpu6: pvtm=1745

[    4.686303] cpu cpu6: pvtm-volt-sel=6

[    4.687556] cpu cpu0: avs=0

[    4.688800] cpu cpu4: avs=0

[    4.690054] cpu cpu6: avs=0

[    4.690505] cpu cpu0: EM: created perf domain

[    4.690576] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0

[    4.691627] cpu cpu4: EM: created perf domain

[    4.691695] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0

[    4.699444] cpu cpu6: EM: created perf domain

[    4.699781] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0

[    4.713944] sdhci: Secure Digital Host Controller Interface driver

[    4.713966] sdhci: Copyright(c) Pierre Ossman

[    4.713972] Synopsys Designware Multimedia Card Interface Driver

[    4.714572] sdhci-pltfm: SDHCI platform and OF driver helper

[    4.714979] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.

[    4.715003] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.

[    4.715014] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a

[    4.715054] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 86,32 bit host data width,256 deep fifo

[    4.716508] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq

[    4.716523] mmc_host mmc2: card is non-removable.

[    4.717427] ledtrig-cpu: registered to indicate activity on CPUs

[    4.717471] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.

[    4.717531] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....

[    4.718308] cryptodev: driver 1.12 loaded.

[    4.718353] hid: raw HID events driver (C) Jiri Kosina

[    4.718624] usbcore: registered new interface driver usbhid

[    4.718632] usbhid: USB HID core driver

[    4.723413] optee: probing for conduit method.

[    4.723434] optee: revision 3.13 (4542e1ef)

[    4.723758] optee: initialized driver

[    4.724234] usbcore: registered new interface driver snd-usb-audio

[    4.730494] input: headset-keys as /devices/platform/es8388-sound/input/input1

[    4.741212] ES8323 3-0011: ASoC: error at soc_component_write_no_lock on ES8323.3-0011: -5

[    4.747713] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA

[    4.782047] mmc0: new HS400 Enhanced strobe MMC card at address 0001

[    4.782601] mmcblk0: mmc0:0001 hB8aP> 29.1 GiB

[    4.782795] mmcblk0boot0: mmc0:0001 hB8aP> partition 1 4.00 MiB

[    4.782980] mmcblk0boot1: mmc0:0001 hB8aP> partition 2 4.00 MiB

[    4.783160] mmcblk0rpmb: mmc0:0001 hB8aP> partition 3 16.0 MiB, chardev (236:0)

[    4.786426]  mmcblk0: p1 p2 p3 p4 p5 p6 p7

[    4.790659] input: rockchip,es8388 Headset as /devices/platform/es8388-sound/sound/card0/input2

[    4.791794] IPVS: Registered protocols (TCP, UDP)

[    4.791834] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)

[    4.791985] IPVS: ipvs loaded.

[    4.791995] IPVS: [rr] scheduler registered.

[    4.792169] Initializing XFRM netlink socket

[    4.792250] NET: Registered protocol family 10

[    4.792438] Segment Routing with IPv6

[    4.792457] NET: Registered protocol family 17

[    4.792462] NET: Registered protocol family 15

[    4.792475] Bridge firewalling registered

[    4.792476] can: controller area network core

[    4.792486] NET: Registered protocol family 29

[    4.792488] can: raw protocol

[    4.792491] can: broadcast manager protocol

[    4.792494] can: netlink gateway - max_hops=1

[    4.792672] Bluetooth: RFCOMM socket layer initialized

[    4.792685] Bluetooth: RFCOMM ver 1.11

[    4.792695] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    4.792701] Bluetooth: HIDP socket layer initialized

[    4.792728] [BT_RFKILL]: Enter rfkill_rk_init

[    4.792733] [WLAN_RFKILL]: Enter rfkill_wlan_init

[    4.793060] [WLAN_RFKILL]: Enter rfkill_wlan_probe

[    4.793083] [WLAN_RFKILL]: can't find rockchip,grf property

[    4.793089] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275s

[    4.793093] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.

[    4.793097] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.

[    4.793112] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.

[    4.793127] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.

[    4.793133] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !

[    4.793138] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio

[    4.793143] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1

[    4.793148] [WLAN_RFKILL]: Exit rfkill_wlan_probe

[    4.793607] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.

[    4.793625] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.

[    4.793635] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.

[    4.793644] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.

[    4.793677] [BT_RFKILL]: Request irq for bt wakeup host

[    4.793732] [BT_RFKILL]: ** disable irq

[    4.793803] [BT_RFKILL]: bt_default device registered.

[    4.793865] Key type dns_resolver registered

[    4.794251] jaguar1 2-0030: driver version: 00.01.01

[    4.794271] jaguar1 2-0030: no pinctrl

[    4.794279] jaguar1 2-0030: get module rockchip,default_rect from dts, wxh(1920x1080)!

[    4.794294] jaguar1 2-0030: can not find pd-gpios, error -2

[    4.794306] jaguar1 2-0030: can not find pd2-gpios, error -2

[    4.794332] jaguar1 2-0030: can not find rst2-gpios, error -2

[    4.794344] jaguar1 2-0030: can not find pwd-gpios, error -2

[    4.794356] jaguar1 2-0030: can not find pwd2-gpios, error -2

[    4.801209] [DRV] I2C Client Init

[    4.802163] Device ID Error... fa, Chip Count:[0]

[    4.803012] Device ID Error... fa, Chip Count:[1]

[    4.803796] Device ID Error... fa, Chip Count:[2]

[    4.804579] Device ID Error... fa, Chip Count:[3]

[    4.804584] Chip Count = 0

[    4.804589] Address [0xff][0xff][0xff][0xff]

[    4.804599] Chip Id [0xff][0xff][0xff][0xff]

[    4.804604] Rev Id [0xff][0xff][0xff][0xff]

[    4.804608] ERROR: could not find jaguar1 devices:0x0

[    4.804657] jaguar1 2-0030: Failed to init jaguar1

[    4.804707] jaguar1 2-0031: driver version: 00.01.01

[    4.804734] jaguar1 2-0031: no pinctrl

[    4.804742] jaguar1 2-0031: get module rockchip,default_rect from dts, wxh(1920x1080)!

[    4.804756] jaguar1 2-0031: can not find pd-gpios, error -2

[    4.804768] jaguar1 2-0031: can not find pd2-gpios, error -2

[    4.804788] jaguar1 2-0031: can not find rst-gpios, error -2

[    4.804803] jaguar1 2-0031: can not find rst2-gpios, error -2

[    4.804815] jaguar1 2-0031: can not find pwd-gpios, error -2

[    4.804827] jaguar1 2-0031: can not find pwd2-gpios, error -2

[    4.809218] [DRV] I2C Client Init

[    4.810130] Device ID Error... fa, Chip Count:[0]

[    4.810974] Device ID Error... fa, Chip Count:[1]

[    4.811817] Device ID Error... fa, Chip Count:[2]

[    4.812660] Device ID Error... fa, Chip Count:[3]

[    4.812666] Chip Count = 0

[    4.812670] Address [0xff][0xff][0xff][0xff]

[    4.812675] Chip Id [0xff][0xff][0xff][0xff]

[    4.812678] Rev Id [0xff][0xff][0xff][0xff]

[    4.812682] ERROR: could not find jaguar1 devices:0x0

[    4.812719] jaguar1 2-0031: Failed to init jaguar1

[    4.813266] Loading compiled-in X.509 certificates

[    4.814374] Btrfs loaded, crc32c=crc32c-generic

[    4.814467] pstore: Using crash dump compression: deflate

[    4.814698] rga3_core0 fdb60000.rga: Adding to iommu group 2

[    4.814903] rga: rga3_core0_irq, irq = 34, match scheduler

[    4.815159] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.

[    4.815200] rga: rga3_core0 probe successfully

[    4.815440] rga3_core1 fdb70000.rga: Adding to iommu group 3

[    4.815589] rga: rga3_core1_irq, irq = 35, match scheduler

[    4.815979] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.

[    4.816046] rga: rga3_core1 probe successfully

[    4.816497] rga: rga2_irq, irq = 36, match scheduler

[    4.816899] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.

[    4.816921] rga: rga2 probe successfully

[    4.817248] rga2_mmu: IOMMU binding successfully, default mapping core[0x1]

[    4.817409] rga: Module initialized. v1.2.20

[    4.817418]

[    4.817425] ********************************************************************

[    4.817432] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **

[    4.817439] **                                                                **

[    4.817445] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **

[    4.817451] **                                                                **

[    4.817457] ** This means that this kernel is built to expose clk operations  **

[    4.817463] ** such as parent or rate setting, enabling, disabling, etc.      **

[    4.817469] ** to userspace, which may compromise security on your system.    **

[    4.817475] **                                                                **

[    4.817481] ** If you see this message and you are not debugging the          **

[    4.817487] ** kernel, report this immediately to your vendor!                **

[    4.817493] **                                                                **

[    4.817499] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **

[    4.817505] ********************************************************************

[    4.819186] vendor storage:20190527 ret = 0

[    4.845370] mali fb000000.gpu: Kernel DDK version g13p0-01eac0

[    4.845909] mali fb000000.gpu: leakage=21

[    4.845939] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!

[    4.847618] mali fb000000.gpu: pvtm=909

[    4.847667] mali fb000000.gpu: pvtm-volt-sel=4

[    4.848110] mali fb000000.gpu: avs=0

[    4.848145] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.

[    4.848591] mali fb000000.gpu: GPU hardware issue table may need updating:

[    4.848591] r0p0 status 5 is unknown; treating as r0p0 status 0

[    4.848599] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0

[    4.848656] mali fb000000.gpu: No priority control manager is configured

[    4.848662] mali fb000000.gpu: No memory group manager is configured

[    4.848676] mali fb000000.gpu: Protected memory allocator not available

[    4.849015] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT

[    4.850208] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'

[    4.850226] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]

[    4.850391] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]

[    4.850544] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]

[    4.850691] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''

[    4.852843] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model

[    4.852973] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0

[    4.854440] mali fb000000.gpu: Probed as mali0

[    4.933104] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    4.947468] vcc_3v3_sd_s0: supplied by vcc_3v3_s3

[    4.948251] pcie20_avdd0v85: supplied by vdd_0v85_s0

[    4.949101] pcie20_avdd1v8: supplied by avcc_1v8_s0

[    4.949884] pcie30_avdd0v75: supplied by avdd_0v75_s0

[    4.950557] pcie30_avdd1v8: supplied by avcc_1v8_s0

[    4.951205] reg-fixed-voltage vcc3v3-lcd0-n: nonexclusive access to GPIO for vcc3v3-lcd0-n

[    4.951258] vcc3v3_lcd0_n: supplied by vcc_1v8_s0

[    4.954597] rockchip-dmc dmc: leakage=47

[    4.954636] rockchip-dmc dmc: leakage-volt-sel=2

[    4.955149] rockchip-dmc dmc: avs=0

[    4.955172] rockchip-dmc dmc: current ATF version 0x100

[    4.955317] rockchip-dmc dmc: normal_rate = 1560000000

[    4.955331] rockchip-dmc dmc: reboot_rate = 2112000000

[    4.955341] rockchip-dmc dmc: suspend_rate = 528000000

[    4.955352] rockchip-dmc dmc: video_4k_rate = 1560000000

[    4.955363] rockchip-dmc dmc: video_4k_10b_rate = 1560000000

[    4.955373] rockchip-dmc dmc: video_svep_rate = 1560000000

[    4.955384] rockchip-dmc dmc: boost_rate = 2112000000

[    4.955394] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000

[    4.955404] rockchip-dmc dmc: performance_rate = 2112000000

[    4.955415] rockchip-dmc dmc: hdmirx_rate = 2112000000

[    4.955431] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate

[    4.955440] rockchip-dmc dmc: failed to get vop pn to msch rl

[    4.955619] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0

[    4.956858] rockchip-dmc dmc: could not find power_model node

[    4.967182] rockchip-csi2-dphy csi2-dcphy0: csi2 dphy0 probe successfully!

[    4.967905] rockchip-csi2-dphy csi2-dcphy1: csi2 dphy1 probe successfully!

[    4.982364] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2

[    4.982452] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3

[    4.982520] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8

[    4.982642] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9

[    4.982680] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2

[    4.982709] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2

[    4.983449] [drm] failed to init overlay plane Cluster0-win1

[    4.983548] [drm] failed to init overlay plane Cluster1-win1

[    4.983639] [drm] failed to init overlay plane Cluster2-win1

[    4.983732] [drm] failed to init overlay plane Cluster3-win1

[    4.984921] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)

[    4.987051] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[    4.989233] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[    4.993471] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

[    5.018780] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc01155f4e0)

[    5.020884] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver

[    5.021427] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0115673e8)

[    5.022636] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver

[    5.023079] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc0115673e8)

[    5.023172] rockchip-drm display-subsystem: bound fde30000.dsi (ops 0xffffffc011569628)

[    5.023275] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0115699f8)

[    5.023376] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc0115699f8)

[    5.026302] rockchip-drm display-subsystem: route-hdmi0: failed to get logo,offset

[    5.031733] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.032111] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.032521] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.032884] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.033236] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.033578] dwhdmi-rockchip fdea0000.hdmi: i2c read err!

[    5.033599] dwhdmi-rockchip fdea0000.hdmi: failed to get edid

[    5.040432] dwhdmi-rockchip fdea0000.hdmi: use tmds mode

[    5.048215] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:1000) for vp1 dclk: 148500000

[    5.048301] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out1 div: 0 dclk_core1 div: 2

[    5.048323] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop1 to 148500000, get 148500000

[    5.048374] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000

[    5.048686] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy pll locked!

[    5.048694] dwhdmi-rockchip fdea0000.hdmi: final tmdsclk = 148500000

[    5.048743] dwhdmi-rockchip fdea0000.hdmi: don't use dsc mode

[    5.048748] dwhdmi-rockchip fdea0000.hdmi: dw hdmi qp use tmds mode

[    5.048758] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000

[    5.048975] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy lane locked!

[    5.086344] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)

[    5.109253] dwmmc_rockchip fe2d0000.mmc: Successfully tuned phase to 135

[    5.114188] mmc2: new ultra high speed SDR104 SDIO card at address 0001

[    5.115517] dwhdmi-rockchip fdea0000.hdmi: use tmds mode

[    5.177808] Console: switching to colour frame buffer device 240x67

[    5.177886] dwhdmi-rockchip fdea0000.hdmi: use tmds mode

[    5.213977] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device

[    5.214983] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0

[    5.218894] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input3

[    5.221542] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.

[    5.221574] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.

[    5.221589] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a

[    5.221640] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 85,32 bit host data width,256 deep fifo

[    5.223865] rkcif rkcif-mipi-lvds: clear unready subdev num: 1

[    5.223883] rockchip-csi2-dphy0: No link between dphy and sensor

[    5.224348] rockchip-csi2-dphy0: No link between dphy and sensor

[    5.224382] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.224413] rkcif-mipi-lvds: Async subdev notifier completed

[    5.224423] rockchip-csi2-dphy0: No link between dphy and sensor

[    5.224444] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.224453] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP

[    5.224466] rkcif rkcif-mipi-lvds1: clear unready subdev num: 1

[    5.224476] rockchip-csi2-dphy1: No link between dphy and sensor

[    5.224983] rockchip-csi2-dphy1: No link between dphy and sensor

[    5.225012] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.225058] rkcif-mipi-lvds1: Async subdev notifier completed

[    5.225069] rockchip-csi2-dphy1: No link between dphy and sensor

[    5.225122] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.225131] rkcif-mipi-lvds1: There is not terminal subdev, not synchronized with ISP

[    5.225164] rockchip-csi2-dphy0: No link between dphy and sensor

[    5.225200] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.225209] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP

[    5.225318] rockchip-csi2-dphy1: No link between dphy and sensor

[    5.225353] rkcif-mipi-lvds1: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    5.225362] rkcif-mipi-lvds1: There is not terminal subdev, not synchronized with ISP

[    5.226616] RKNPU fdab0000.npu: Adding to iommu group 0

[    5.226894] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode

[    5.227361] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]

[    5.227393] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]

[    5.227421] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]

[    5.227949] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1

[    5.230607] RKNPU fdab0000.npu: leakage=11

[    5.230775] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!

[    5.235815] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    5.237224] RKNPU fdab0000.npu: pvtm=908

[    5.241221] RKNPU fdab0000.npu: pvtm-volt-sel=4

[    5.242940] RKNPU fdab0000.npu: avs=0

[    5.243140] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0

[    5.249691] RKNPU fdab0000.npu: failed to find power_model node

[    5.249707] RKNPU fdab0000.npu: RKNPU: failed to initialize power model

[    5.249717] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient

[    5.250881] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[    5.253129] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

0m.  5.253198] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

[  OK  ] Started ;39mForward Password R…uests to Wall Directory Watch.

rs[  OK  ] Reached target User and Group Name Lookups.wm-regulator-config

[  OK  ] Reached target Remotet File Systems.ali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); [  OK  ] Reached target Slices. mali_ko is '', rk_ko_ver is '5', built at '18:24:53', on 'May 22 2023'.

[  OK  ] Reached target Swap.

 unit u[  OK  ] Listening on fsck to fsckd communication Socket.

[  OK  0m] Listening on initctl Compatibility Named Pipe.m: 1

ing IP firewalling.)0-vir0: Async subdev notifier completed

[    6.165576] systemd[1]: Created slice system-modprobe.slice.

[    6.166421] systemd[1]: Created slice system-serial\x2dgetty.slice.

[    6.167165] systemd[1]: Created slice User and Session Slice.

[    6.167695] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    6.168372] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. 5.255877]   #2: rockchip-hdmi0

[    6.168406] systemd[1]: Reached target User and Group Name L[  OK  ] Listening on Journal Socket (/dev/log).

[  OK  ] Listening on oJournal Socket.unted filesystem with ordered data mode. Opts: (null)

o[  OK  ] Listening on udev Control Socket.kystem) on device 179:7.

[  OK  ] Listening on uudev Kernel Socket.

ps.  5.834415] Freeing unused kernel memory: 6912K

[    6.168948] systemd[1]: Reached target Remote File Systems.

         Mounting POSIX ]: Reached target Slices.ld time, advancing clock.

[    5.922597] systemd[1Message Queue File System...alias 'autofs4': Function not implemented

[    6.169905] systemd[1]: Reached target Swap.u3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVI[    6.170410] systemd[1]: Listening on          Mounting /sys/kernel/debug...LS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrfsck to fsckd communication Socket.

[    6.171024] systemd[1]: Listening on initctl Compatibility Named Pipe.

[    6.175320] syste         Mounting Kernel Trace File System...

md[1]: Condition check resulted in Journal Audit Socket being skipped.

[    6.175435] systemd[1]: Listening on Journal Socket (/dev/log).

[    6.176052] sy         Starting Journal Service...

stemd[1]: Listening on Journal Socket.[270]: Ignoring "noauto" for root device

[    6.176532] systemd[1]: Listening on udev Control Socket.

[    6.177022] systemd[1]: Liste         Starting Set the console keyboard layout...n the local system does not support BPF/cgring on udev Kernel Socket.

[    6.177562] systemd[1]: Condition check resulted in Huge Pages File System being skipped.

[    6.178383] systemd[1]: Mo         Starting Load Kernel Module chromeos_pstore...

unting POSIX Message Queue File System... User and Session Slice

[    6.179691] systemd[1]: Mounting /sys/kernel/debug...

[    6.181007] systemd[1]: Mounting Kernel Trace File System...

[    6.182664]          Starting Load Ksernel Module pstore_blk...

ystemd[1]: Starting Journal Service...

[    6.184060] systemd[1]: Starting Set the console keyboard layout...

[    6.184498] systemd[1]: Condition ch         Starting Load Kernel Module pstore_zone...e

ck resulted in Create list of static device nodes for the current kernel being skipped.

[    6.185601] systemd[1]: Starting Load Kernel Module chromeos_pstore...

[    6.186162] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.

[    6.186205] systemd[1]: Condition check resulted in Load Kernel Module efi_pstore being skipped.

[    6.187501] systemd[1]: Starting Load Kernel Module pstore_blk...

[    6.189144] systemd[1]: Starting Load Kernel Module pstore_zone...

[    6.189657] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.

[    6.191857] systemd[1]: Condition check resulted in Set Up Additi         Starting Load Kernel Modules...

onal Binary Formats being skipped.

[    6.191967] systemd[1]: Condition check resulted in File System Check on Root Device be         Starting Reimount Root and Kernel File Sysntems...

g skipped.

[    6.194629] systemd[1]: Starting Load Kernel Modules...

[    6.196053] systemd[1]: Starting Remount Root and Kernel File Systems...

[    6.197529] systemd[1]: S         Starting udetv Coldplug all Devices...ar

                                                                             ting udev Coldplug all Devices...

[  OK  ] Mounted POSIX Message Queue Fi[l e   S stem.

6.200008] systemd[1][  OK  ] Mounted [0;1;39m/sys/kernel/debug.

[  OK  ] Mount ed Kernel Trace MounteFile System.

d POSIX Message Queue File System.