FAE 项目

DDR Version V1.07 20220412

LPDDR4X, 2112MHz

channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB

channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB

channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB

channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB

change to F1: 528MHz

change to F2: 1068MHz

change to F3: 1560MHz

change to F0: 2112MHz

out

U-Boot SPL board init

U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)

Failed to set cpub01

Failed to set cpub23

unknown raw ID phN

unrecognized JEDEC id bytes: 00, 00, 00

Trying to boot from MMC2

MMC: no card present

mmc_init: -123, time 0

spl: mmc init failed with error: -123

Trying to boot from MMC1

Trying fit image at 0x4000 sector

## Verified-boot: 0

## Checking atf-1 0x00040000 ... sha256(5ae6932916...) + OK

## Checking uboot 0x00200000 ... sha256(0a90d64870...) + OK

## Checking fdt 0x00327780 ... sha256(c07f4a4d71...) + OK

## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK

## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK

## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK

## Checking optee 0x08400000 ... sha256(4ed9cd20b5...) + OK

Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)

Total: 115.92 ms

INFO:    Preloader serial: 2

NOTICE:  BL31: v2.3():v2.3-384-g45c8fcb44:derrick.huang

NOTICE:  BL31: Built : 15:14:04, Jun 18 2022

INFO:    ext 32k is not valid

INFO:    GICv3 without legacy support detected.

INFO:    ARM GICv3 driver initialized in EL3

INFO:    system boots from cpu-hwid-0

INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001

INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz

INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz

INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz

INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz

INFO:    BL31: Initialising Exception Handling Framework

INFO:    BL31: Initializing runtime services

INFO:    BL31: Initializing BL32

INFO:    hdmirx_handler: dma not on, ret

I/TC:

I/TC: OP-TEE version: 3.13.0-645-g87d94c5ef8 #xb.wang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #1 Tue Jun 14 10:44:31 CST 2022 aarch64

I/TC: Primary CPU initializing

I/TC: Primary CPU switching to normal world boot

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0x200000

INFO:    SPSR = 0x3c9

U-Boot 2017.09 (Sep 28 2022 - 10:36:47 +0800)

Model: Rockchip RK3588 Evaluation Board

PreSerial: 2, raw, 0xfeb50000

DRAM:  7.7 GiB

Sysmem: init

Relocation Offset: edb4f000

Relocation fdt: eb9fa468 - eb9fece8

CR: M/C/I

Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0

Bootdev(atags): mmc 0

MMC0: HS200, 200Mhz

PartType: EFI

DM: v2

boot mode: None

FIT: no signed, no conf required

DTB: rk-kernel.dtb

HASH(c): OK

Pre-reloc: vcc_mipicsi1

I2c0 speed: 100000Hz

en-gpios- not found!

vdd_cpu_big0_s0 800000 uV

en-gpios- not found!

vdd_cpu_big1_s0 800000 uV

I2c1 speed: 100000Hz

en-gpios- not found!

vdd_npu_s0 800000 uV

spi2: RK806: 2

ON=0x00, OFF=0x00

vdd_gpu_s0 750000 uV

vdd_cpu_lit_s0 750000 uV

vdd_log_s0 750000 uV

vdd_vdenc_s0 init 750000 uV

vdd_ddr_s0 850000 uV

Model: Rockchip RK3588 LZ160Update LP4 X10 Board

CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)

  b0pll 24000 KHz

  b1pll 24000 KHz

  lpll 24000 KHz

  v0pll 24000 KHz

  aupll 786431 KHz

  cpll 1500000 KHz

  gpll 1188000 KHz

  npll 850000 KHz

  ppll 1100000 KHz

  aclk_center_root 702000 KHz

  pclk_center_root 100000 KHz

  hclk_center_root 396000 KHz

  aclk_center_low_root 500000 KHz

  aclk_top_root 594000 KHz

  pclk_top_root 100000 KHz

  aclk_low_top_root 396000 KHz

Net:   eth1: ethernet@fe1c0000

Hit key to stop autoboot('CTRL+C'):  0

ANDROID: reboot reason: "(none)"

optee api revision: 2.0

TEEC: Waring: Could not find security partition

Not AVB images, AVB skip

No valid android hdr

Android image load failed

Android boot failed, error -1.

## Booting FIT Image at 0xe99e0640 with size 0x01e18e00

Fdt Ramdisk skip relocation

## Loading kernel from FIT Image at e99e0640 ...

   Using 'conf' configuration

## Verified-boot: 0

   Trying 'kernel' kernel subimage

     Description:  unavailable

     Type:         Kernel Image

     Compression:  uncompressed

     Data Start:   0xe9a09240

     Data Size:    31392256 Bytes = 29.9 MiB

     Architecture: AArch64

     OS:           Linux

     Load Address: 0x00400000

     Entry Point:  0x00400000

     Hash algo:    sha256

     Hash value:   b4a7fe949d802f5e55d1c3dea8344db537d47b0194e32b40afee1dc4045314f2

   Verifying Hash Integrity ... sha256+ OK

## Loading fdt from FIT Image at e99e0640 ...

   Using 'conf' configuration

   Trying 'fdt' fdt subimage

     Description:  unavailable

     Type:         Flat Device Tree

     Compression:  uncompressed

     Data Start:   0xe99e0e40

     Data Size:    164700 Bytes = 160.8 KiB

     Architecture: AArch64

     Load Address: 0x0a100000

     Hash algo:    sha256

     Hash value:   7912643392b97e6eed5c1fa43e78efd0ba47e8fb1087ae74bc9b1c6bf0beda2d

   Verifying Hash Integrity ... sha256+ OK

   Loading fdt from 0x0a100000 to 0x0a100000

   Booting using the fdt blob at 0x0a100000

   Loading Kernel Image from 0xe9a09240 to 0x00400000 ... OK

   kernel loaded at 0x00400000, end = 0x021f0200

  'reserved-memory' cma: addr=10000000 size=10000000

   Using Device Tree in place at 000000000a100000, end 000000000a12b35b

Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)

Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)

Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)

Total: 525.817 ms

Starting kernel ...

[    0.641132] Booting Linux on physical CPU 0x0000000000 [0x412fd050]

[    0.641153] Linux version 5.10.66 (xuzhenhua@ubuntu2004) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Tue Sep 27 19:40:35 CST 2022

[    0.652521] Machine model: Rockchip RK3588 LZ160Update LP4 X10 Board

[    0.652589] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')

[    0.656782] printk: bootconsole [uart8250] enabled

[    0.659816] efi: UEFI not found.

[    0.666113] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB

[    0.667177] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB

[    0.668321] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB

[    0.669059] OF: reserved mem: initialized node cma, compatible id shared-dma-pool

[    0.810230] Zone ranges:

[    0.810471]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]

[    0.811039]   DMA32    empty

[    0.811307]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]

[    0.811874] Movable zone start for each node

[    0.812262] Early memory node ranges

[    0.812590]   node   0: [mem 0x0000000000200000-0x00000000083fffff]

[    0.813163]   node   0: [mem 0x0000000009400000-0x00000000efffffff]

[    0.813736]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]

[    0.814309] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]

[    0.858664] psci: probing for conduit method from DT.

[    0.859132] psci: PSCIv1.1 detected in firmware.

[    0.859553] psci: Using standard PSCI v0.2 function IDs

[    0.860031] psci: Trusted OS migration not required

[    0.860478] psci: SMC Calling Convention v1.2

[    0.861245] percpu: Embedded 30 pages/cpu s83816 r8192 d30872 u122880

[    0.862033] Detected VIPT I-cache on CPU0

[    0.862442] CPU features: detected: GIC system register CPU interface

[    0.863026] CPU features: detected: Virtualization Host Extensions

[    0.863595] CPU features: detected: ARM errata 1165522, 1319367, or 1530923

[    0.864237] alternatives: patching kernel code

[    0.864927] Built 1 zonelists, mobility grouping on.  Total pages: 1995336

[    0.865559] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000

[    0.868746] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)

[    0.869855] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)

[    0.870566] mem auto-init: stack:off, heap alloc:off, heap free:off

[    0.877250] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)

[    0.945392] Memory: 7591608K/8108032K available (15232K kernel code, 3200K rwdata, 5760K rodata, 6336K init, 520K bss, 254280K reserved, 262144K cma-reserved)

[    0.946819] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1

[    0.947444] ftrace: allocating 57903 entries in 227 pages

[    1.041810] ftrace: allocated 227 pages with 5 groups

[    1.042549] rcu: Hierarchical RCU implementation.

[    1.042979] rcu:     RCU event tracing is enabled.

[    1.043392]  Rude variant of Tasks RCU enabled.

[    1.043808] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.

[    1.049642] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0

[    1.052514] GICv3: GIC: Using split EOI/Deactivate mode

[    1.052991] GICv3: 480 SPIs implemented

[    1.053343] GICv3: 0 Extended SPIs implemented

[    1.053773] GICv3: Distributor has no Range Selector support

[    1.054296] GICv3: 16 PPIs implemented

[    1.054682] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000

[    1.055434] ITS [mem 0xfe640000-0xfe65ffff]

[    1.055866] ITS@0x00000000fe640000: allocated 8192 Devices @1001f0000 (indirect, esz 8, psz 64K, shr 0)

[    1.056742] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100200000 (flat, esz 2, psz 64K, shr 0)

[    1.057686] ITS: using cache flushing for cmd queue

[    1.058164] ITS [mem 0xfe660000-0xfe67ffff]

[    1.058585] ITS@0x00000000fe660000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)

[    1.059461] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)

[    1.060400] ITS: using cache flushing for cmd queue

[    1.061008] GICv3: using LPI property table @0x0000000100240000

[    1.061667] GIC: using cache flushing for LPI property table

[    1.062188] GICv3: CPU0: using allocated LPI pending table @0x0000000100250000

[    1.063011] random: get_random_bytes called from start_kernel+0x3dc/0x5c8 with crng_init=0

[    1.184403] arch_timer: cp15 timer(s) running at 24.00MHz (phys).

[    1.185714] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

[    1.186704] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

[    1.188597] Console: colour dummy device 80x25

[    1.189031] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)

[    1.189969] pid_max: default: 32768 minimum: 301

[    1.190525] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)

[    1.191234] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)

[    1.193551] rcu: Hierarchical SRCU implementation.

[    1.194826] Platform MSI: msi-controller@fe640000 domain created

[    1.195416] Platform MSI: msi-controller@fe660000 domain created

[    1.196277] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created

[    1.197056] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created

[    1.197938] EFI services will not be available.

[    1.198681] smp: Bringing up secondary CPUs ...

I/TC: Secondary CPU 1 initializing

I/TC: Secondary CPU 1 switching to normal world boot

I/TC: Secondary CPU 2 initializing

I/TC: Secondary CPU 2 switching to normal world boot

I/TC: Secondary CPU 3 initializing

I/TC: Secondary CPU 3 switching to normal world boot

I/TC: Secondary CPU 4 initializing

I/TC: Secondary CPU 4 switching to normal world boot

I/TC: Secondary CPU 5 initializing

I/TC: Secondary CPU 5 switching to normal world boot

I/TC: Secondary CPU 6 initializing

I/TC: Secondary CPU 6 switching to normal world boot

I/TC: Secondary CPU 7 initializing

I/TC: Secondary CPU 7 switching to normal world boot

[    1.200328] Detected VIPT I-cache on CPU1

[    1.200362] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000

[    1.200381] GICv3: CPU1: using allocated LPI pending table @0x0000000100260000

[    1.200423] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]

[    1.201690] Detected VIPT I-cache on CPU2

[    1.201720] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000

[    1.201738] GICv3: CPU2: using allocated LPI pending table @0x0000000100270000

[    1.201777] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]

[    1.203037] Detected VIPT I-cache on CPU3

[    1.203065] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000

[    1.203081] GICv3: CPU3: using allocated LPI pending table @0x0000000100280000

[    1.203118] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]

[    1.204362] CPU features: detected: Spectre-v4

[    1.204366] Detected PIPT I-cache on CPU4

[    1.204381] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000

[    1.204390] GICv3: CPU4: using allocated LPI pending table @0x0000000100290000

[    1.204413] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]

[    1.205619] Detected PIPT I-cache on CPU5

[    1.205635] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000

[    1.205644] GICv3: CPU5: using allocated LPI pending table @0x00000001002a0000

[    1.205668] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]

[    1.206914] Detected PIPT I-cache on CPU6

[    1.206928] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000

[    1.206938] GICv3: CPU6: using allocated LPI pending table @0x00000001002b0000

[    1.206961] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]

[    1.208146] Detected PIPT I-cache on CPU7

[    1.208161] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000

[    1.208171] GICv3: CPU7: using allocated LPI pending table @0x00000001002c0000

[    1.208194] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]

[    1.208261] smp: Brought up 1 node, 8 CPUs

[    1.224840] SMP: Total of 8 processors activated.

[    1.225274] CPU features: detected: Privileged Access Never

[    1.225783] CPU features: detected: User Access Override

[    1.226268] CPU features: detected: 32-bit EL0 Support

[    1.226736] CPU features: detected: Common not Private translations

[    1.227317] CPU features: detected: RAS Extension Support

[    1.227811] CPU features: detected: Data cache clean to the PoU not required for I/D coherence

[    1.228596] CPU features: detected: CRC32 instructions

[    1.229067] CPU features: detected: Speculative Store Bypassing Safe (SSBS)

[    1.229707] CPU features: detected: RCpc load-acquire (LDAPR)

[    1.230315] CPU: All CPU(s) started at EL2

[    1.232057] devtmpfs: initialized

[    1.242562] Registered cp15_barrier emulation handler

[    1.243029] Registered setend emulation handler

[    1.243517] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

[    1.244411] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)

[    1.247485] pinctrl core: initialized pinctrl subsystem

[    1.248221] DMI not present or invalid.

[    1.248689] NET: Registered protocol family 16

[    1.249934] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations

[    1.250671] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations

[    1.251977] thermal_sys: Registered thermal governor 'fair_share'

[    1.251980] thermal_sys: Registered thermal governor 'step_wise'

[    1.252536] thermal_sys: Registered thermal governor 'user_space'

[    1.253085] thermal_sys: Registered thermal governor 'power_allocator'

[    1.253767] thermal thermal_zone1: power_allocator: sustainable_power will be estimated

[    1.255122] thermal thermal_zone2: power_allocator: sustainable_power will be estimated

[    1.255883] thermal thermal_zone3: power_allocator: sustainable_power will be estimated

[    1.256639] thermal thermal_zone4: power_allocator: sustainable_power will be estimated

[    1.257396] thermal thermal_zone5: power_allocator: sustainable_power will be estimated

[    1.258152] thermal thermal_zone6: power_allocator: sustainable_power will be estimated

[    1.258900] cpuidle: using governor menu

[    1.259265] Registered FIQ tty driver

[    1.259754] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

[    1.260482] ASID allocator initialised with 65536 entries

[    1.262510] printk: console [ramoops-1] enabled

[    1.262924] pstore: Registered ramoops as persistent store backend

[    1.263489] ramoops: using 0xf0000@0x110000, ecc: 0

[    1.308307] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000

[    1.309156] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000

[    1.309971] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000

[    1.310804] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000

[    1.311665] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000

[    1.312291] rockchip-pinctrl pinctrl: probed pinctrl

[    1.326509] fiq_debugger fiq_debugger.0: IRQ fiq not found

[    1.327018] fiq_debugger fiq_debugger.0: IRQ wakeup not found

[    1.327543] fiq_debugger_probe: could not install nmi irq handler

[ [    1.328143] printk: console [ttyFIQ0] enabled

   1.328143] printk: console [ttyFIQ0] enabled

[    1.328927] printk: bootconsole [uart8250] disabled

[    1.328927] printk: bootconsole [uart8250] disabled

[    1.329460] Registered fiq debugger ttyFIQ0

[    1.329804] vcc5v0_sys: supplied by vcc12v_dcin

[    1.329931] vcc5v0_usbdcin: supplied by vcc12v_dcin

[    1.330059] vcc5v0_usb: supplied by vcc5v0_usbdcin

[    1.330176] vcc_1v1_nldo_s3: supplied by vcc5v0_sys

[    1.330423] vbus5v0_typec: supplied by vcc5v0_usb

[    1.330551] vcc3v3_pcie30: supplied by vcc12v_dcin

[    1.330653] vcc5v0_host: supplied by vcc5v0_usb

[    1.331114] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!

[    1.331124] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!

[    1.331394] iommu: Default domain type: Translated

[    1.331474] rk_iommu fdab9000.iommu: version = 2

[    1.331852] rk_iommu fdb50800.iommu: version = 2

[    1.332086] rk_iommu fdb60f00.iommu: version = 2

[    1.332285] rk_iommu fdb70f00.iommu: version = 2

[    1.332449] rk_iommu fdb90480.iommu: version = 2

[    1.332627] rk_iommu fdba0800.iommu: version = 2

[    1.332803] rk_iommu fdba4800.iommu: version = 2

[    1.332983] rk_iommu fdba8800.iommu: version = 2

[    1.333158] rk_iommu fdbac800.iommu: version = 2

[    1.333334] rk_iommu fdbb0800.iommu: version = 2

[    1.333525] rk_iommu fdbdf000.iommu: version = 2

[    1.333786] rk_iommu fdbef000.iommu: version = 2

[    1.334062] rk_iommu fdc38700.iommu: version = 2

[    1.334336] rk_iommu fdc48700.iommu: version = 2

[    1.334543] rk_iommu fdcb7f00.iommu: version = 2

[    1.334768] rk_iommu fdcc7f00.iommu: version = 2

[    1.334947] rk_iommu fdce0800.iommu: version = 2

[    1.335055] rk_iommu fdd97e00.iommu: version = 2

[    1.335381] SCSI subsystem initialized

[    1.335455] usbcore: registered new interface driver usbfs

[    1.335471] usbcore: registered new interface driver hub

[    1.335487] usbcore: registered new device driver usb

[    1.335523] mc: Linux media interface: v0.10

[    1.335535] videodev: Linux video capture interface: v2.00

[    1.335559] pps_core: LinuxPPS API ver. 1 registered

[    1.335563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    1.335569] PTP clock support registered

[    1.335834] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.

[    1.335865] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0

[    1.337056] Advanced Linux Sound Architecture Driver Initialized.

[    1.337234] Bluetooth: Core ver 2.22

[    1.337247] NET: Registered protocol family 31

[    1.337251] Bluetooth: HCI device and connection manager initialized

[    1.337256] Bluetooth: HCI socket layer initialized

[    1.337261] Bluetooth: L2CAP socket layer initialized

[    1.337269] Bluetooth: SCO socket layer initialized

[    1.338560] rockchip-cpuinfo cpuinfo: SoC            : 35880000

[    1.338566] rockchip-cpuinfo cpuinfo: Serial         : a70594ab5554aece

[    1.338887] clocksource: Switched to clocksource arch_sys_counter

[    1.636111] NET: Registered protocol family 2

[    1.636217] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)

[    1.638047] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)

[    1.638137] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)

[    1.638461] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)

[    1.639201] TCP: Hash tables configured (established 65536 bind 65536)

[    1.639255] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)

[    1.639398] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)

[    1.639636] NET: Registered protocol family 1

[    1.639847] RPC: Registered named UNIX socket transport module.

[    1.639854] RPC: Registered udp transport module.

[    1.639857] RPC: Registered tcp transport module.

[    1.639861] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.640202] PCI: CLS 0 bytes, default 64

[    1.641070] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

[    1.643356] Initialise system trusted keyrings

[    1.643410] workingset: timestamp_bits=62 max_order=21 bucket_order=0

[    1.645419] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[    1.645677] NFS: Registering the id_resolver key type

[    1.645687] Key type id_resolver registered

[    1.645691] Key type id_legacy registered

[    1.645706] ntfs: driver 2.1.32 [Flags: R/O].

[    1.645785] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.

[    1.645871] fuse: init (API version 7.32)

[    1.646000] SGI XFS with security attributes, no debug enabled

[    1.666114] NET: Registered protocol family 38

[    1.666123] Key type asymmetric registered

[    1.666127] Asymmetric key parser 'x509' registered

[    1.666142] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)

[    1.666146] io scheduler mq-deadline registered

[    1.666150] io scheduler kyber registered

[    1.666590] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!

[    1.666797] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!

[    1.674635] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success

[    1.674820] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success

[    1.677808] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node

[    1.677954] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node

[    1.678002] rk-pcie fe170000.pcie: no vpcie3v3 regulator found

[    1.678043] pwm-backlight backlight: supply power not found, using dummy regulator

[    1.678262] mpp_service mpp-srv: d52577f87 author: slxia 2022-08-11 rk3588_linux_release_v1.0.1_20220620

[    1.678267] mpp_service mpp-srv: probe start

[    1.678303] rk-pcie fe170000.pcie: missing legacy IRQ resource

[    1.678325] rk-pcie fe170000.pcie: IRQ msi not found

[    1.678334] rk-pcie fe170000.pcie: use outband MSI support

[    1.678344] rk-pcie fe170000.pcie: Missing *config* reg space

[    1.678361] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:

[    1.678387] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000

[    1.678408] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000

[    1.678429] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000

[    1.678445] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000

[    1.678479] rk-pcie fe170000.pcie: Missing *config* reg space

[    1.678513] rk-pcie fe170000.pcie: invalid resource

[    1.679579] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1

[    1.679782] mpp_vdpu2 fdb50400.vdpu: probe device

[    1.679879] mpp_vdpu2 fdb50400.vdpu: reset group is empty!

[    1.679883] vdpu_init:501: No aclk reset resource define

[    1.679888] mpp_vdpu2 fdb50400.vdpu: reset group is empty!

[    1.679892] vdpu_init:504: No hclk reset resource define

[    1.679977] mpp_vdpu2 fdb50400.vdpu: probing finish

[    1.680194] mpp_vepu2 jpege-ccu: probing start

[    1.680200] mpp_vepu2 jpege-ccu: probing finish

[    1.680327] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5

[    1.680462] mpp_vepu2 fdba0000.jpege-core: probing start

[    1.680565] mpp_vepu2 fdba0000.jpege-core: attach ccu success

[    1.680646] mpp_vepu2 fdba0000.jpege-core: probing finish

[    1.680747] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6

[    1.680884] mpp_vepu2 fdba4000.jpege-core: probing start

[    1.680981] mpp_vepu2 fdba4000.jpege-core: attach ccu success

[    1.681058] mpp_vepu2 fdba4000.jpege-core: probing finish

[    1.681157] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7

[    1.681295] mpp_vepu2 fdba8000.jpege-core: probing start

[    1.681396] mpp_vepu2 fdba8000.jpege-core: attach ccu success

[    1.681476] mpp_vepu2 fdba8000.jpege-core: probing finish

[    1.681564] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8

[    1.681703] mpp_vepu2 fdbac000.jpege-core: probing start

[    1.681796] mpp_vepu2 fdbac000.jpege-core: attach ccu success

[    1.681871] mpp_vepu2 fdbac000.jpege-core: probing finish

[    1.682158] mpp-iep2 fdbb0000.iep: Adding to iommu group 9

[    1.682309] mpp-iep2 fdbb0000.iep: probe device

[    1.682426] mpp-iep2 fdbb0000.iep: allocate roi buffer failed

[    1.682483] mpp-iep2 fdbb0000.iep: probing finish

[    1.682704] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4

[    1.682910] mpp_jpgdec fdb90000.jpegd: probe device

[    1.683091] mpp_jpgdec fdb90000.jpegd: probing finish

[    1.683535] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start

[    1.683600] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish

[    1.683685] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12

[    1.683936] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start

[    1.684048] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!

[    1.684053] rkvdec2_init:697: No niu aclk reset resource define

[    1.684057] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!

[    1.684061] rkvdec2_init:700: No niu hclk reset resource define

[    1.684123] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001

[    1.684127] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0

[    1.684261] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000

[    1.684265] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000

[    1.684270] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520

[    1.684274] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576

[    1.684278] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512

[    1.684307] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish

[    1.684384] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13

[    1.684613] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start

[    1.684723] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!

[    1.684728] rkvdec2_init:697: No niu aclk reset resource define

[    1.684732] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!

[    1.684736] rkvdec2_init:700: No niu hclk reset resource define

[    1.684784] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002

[    1.684801] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1

[    1.684961] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000

[    1.684965] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000

[    1.684970] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424

[    1.684974] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576

[    1.684978] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512

[    1.685007] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish

[    1.685209] mpp_rkvenc2 rkvenc-ccu: probing start

[    1.685215] mpp_rkvenc2 rkvenc-ccu: probing finish

[    1.685319] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10

[    1.685495] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start

[    1.685512] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8

[    1.685670] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0

[    1.685753] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish

[    1.685822] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11

[    1.686038] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start

[    1.686054] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8

[    1.686218] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1

[    1.686286] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish

[    1.686814] mpp_av1dec: Adding child /av1d@fdc70000

[    1.687038] mpp_av1dec: register device av1d-master

[    1.687056] mpp_av1dec av1d-master: av1_iommu_of_xlate,784

[    1.687075] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu

[    1.687083] mpp_av1dec av1d-master: Adding to iommu group 18

[    1.687301] mpp_av1dec av1d-master: probing start

[    1.687507] mpp_av1dec av1d-master: probing finish

[    1.687543] mpp_service mpp-srv: probe success

[    1.694278] rk-pcie fe150000.pcie: missing legacy IRQ resource

[    1.694307] rk-pcie fe150000.pcie: IRQ msi not found

[    1.694319] rk-pcie fe150000.pcie: use outband MSI support

[    1.694331] rk-pcie fe150000.pcie: Missing *config* reg space

[    1.694353] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:

[    1.694400] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000

[    1.694436] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000

[    1.694469] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000

[    1.694495] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000

[    1.694539] rk-pcie fe150000.pcie: Missing *config* reg space

[    1.694581] rk-pcie fe150000.pcie: invalid resource

[    1.695554] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330

[    1.695564] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    1.696415] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330

[    1.696423] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    1.697281] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330

[    1.697289] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16

[    1.697736] rockchip-pvtm fda40000.pvtm: pvtm@0 probed

[    1.697794] rockchip-pvtm fda50000.pvtm: pvtm@1 probed

[    1.697847] rockchip-pvtm fda60000.pvtm: pvtm@2 probed

[    1.697900] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed

[    1.697951] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed

[    1.698635] rockchip-system-monitor rockchip-system-monitor: system monitor probe

[    1.699435] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled

[    1.699818] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A

[    1.700158] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 99, base_baud = 1500000) is a 16550A

[    1.700377] feba0000.serial: ttyS7 at MMIO 0xfeba0000 (irq = 100, base_baud = 1500000) is a 16550A

[    1.700669] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 101, base_baud = 1500000) is a 16550A

[    1.701879] random: fast init done

[    1.701976] random: crng init done

[    1.702678] rockchip-vop2 fdd90000.vop: Adding to iommu group 17

[    1.711209] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2

[    1.711222] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3

[    1.711242] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8

[    1.711250] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9

[    1.711257] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2

[    1.711263] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2

[    1.711474] [drm] failed to init overlay plane Cluster0-win1

[    1.711506] [drm] failed to init overlay plane Cluster1-win1

[    1.711537] [drm] failed to init overlay plane Cluster2-win1

[    1.711566] [drm] failed to init overlay plane Cluster3-win1

[    1.722405] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fe1618)

[    1.722965] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver

[    1.723147] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fe9378)

[    1.723681] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver

[    1.723845] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010fe9378)

[    1.723887] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517

[    1.730093] panel-simple-dsi fde30000.dsi.0: supply power not found, using dummy regulator

[    1.732790] brd: module loaded

[    1.735722] loop: module loaded

[    1.735899] zram: Added device: zram0

[    1.736033] lkdtm: No crash points registered, enable through debugfs

[    1.736134] system_heap: orders[0] = 6

[    1.736139] system_heap: orders[1] = 4

[    1.736143] system_heap: orders[2] = 0

[    1.737136] ahci fe210000.sata: supply ahci not found, using dummy regulator

[    1.737210] ahci fe210000.sata: supply phy not found, using dummy regulator

[    1.737320] ahci fe210000.sata: supply target not found, using dummy regulator

[    1.737384] ahci fe210000.sata: forcing port_map 0x0 -> 0x1

[    1.737406] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode

[    1.737414] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst

[    1.737424] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP

[    1.738028] scsi host0: ahci

[    1.738162] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 83

[    1.739306] rockchip-spi feb20000.spi: no high_speed pinctrl state

[    1.740495] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1

[    1.740629] rk806 spi2.0: ON: 0x40 OFF:0x0

[    1.742340] vdd_gpu_s0: supplied by vcc5v0_sys

[    1.743421] vdd_cpu_lit_s0: supplied by vcc5v0_sys

[    1.744035] vdd_log_s0: supplied by vcc5v0_sys

[    1.744631] vdd_vdenc_s0: supplied by vcc5v0_sys

[    1.745288] vdd_ddr_s0: supplied by vcc5v0_sys

[    1.745727] vdd2_ddr_s3: supplied by vcc5v0_sys

[    1.746325] vdd_2v0_pldo_s3: supplied by vcc5v0_sys

[    1.746870] vcc_3v3_s3: supplied by vcc5v0_sys

[    1.747397] vddq_ddr_s0: supplied by vcc5v0_sys

[    1.747996] vcc_1v8_s3: supplied by vcc5v0_sys

[    1.748540] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3

[    1.749142] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3

[    1.749668] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3

[    1.750201] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3

[    1.750730] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3

[    1.751350] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3

[    1.752014] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3

[    1.752611] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3

[    1.753205] vcc_3v3_s0: supplied by vcc5v0_sys

[    1.753737] vccio_sd_s0: supplied by vcc5v0_sys

[    1.754279] pldo6_s3: supplied by vcc5v0_sys

[    1.754775] rk806 spi2.0: no sleep-setting state

[    1.754782] rk806 spi2.0: no reset-setting pinctrl state

[    1.754787] rk806 spi2.0: no dvs-setting pinctrl state

[    1.756976] libphy: Fixed MDIO Bus: probed

[    1.757161] CAN device driver interface

[    1.758752] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found

[    1.758911] rk_gmac-dwmac fe1c0000.ethernet: no regulator found

[    1.758918] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (input).

[    1.758924] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x44).

[    1.758930] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.

[    1.758935] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff

[    1.758949] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).

[    1.758956] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx

[    1.758962] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx

[    1.758976] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed

[    1.758980] rk_gmac-dwmac fe1c0000.ethernet: clock input from PHY

[    1.759198] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID

[    1.759285] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51

[    1.759291] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5

[    1.759297] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported

[    1.759302] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported

[    1.759307] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported

[    1.759312] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported

[    1.759343] rk_gmac-dwmac fe1c0000.ethernet: TSO supported

[    1.759347] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer

[    1.759353] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)

[    1.759358] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled

[    1.759364] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width

[    1.883380] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3

[    1.895558] libphy: stmmac: probed

[    1.897237] PPP generic driver version 2.4.2

[    1.897316] PPP BSD Compression module registered

[    1.897321] PPP Deflate Compression module registered

[    1.897334] PPP MPPE Compression module registered

[    1.897339] NET: Registered protocol family 24

[    1.897379] usbcore: registered new interface driver rtl8150

[    1.897401] usbcore: registered new interface driver r8152

[    1.900041] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x3

[    1.910336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.910364] ehci-pci: EHCI PCI platform driver

[    1.910395] ehci-platform: EHCI generic platform driver

[    1.912846] ehci-platform fc800000.usb: EHCI Host Controller

[    1.912948] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1

[    1.913019] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000

[    1.925557] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00

[    1.925585] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x210022

[    1.925648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    1.925655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.925660] usb usb1: Product: EHCI Host Controller

[    1.925665] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd

[    1.925670] usb usb1: SerialNumber: fc800000.usb

[    1.925881] hub 1-0:1.0: USB hub found

[    1.925898] hub 1-0:1.0: 1 port detected

[    1.928473] ehci-platform fc880000.usb: EHCI Host Controller

[    1.928546] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2

[    1.928602] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000

[    1.938897] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00

[    1.938976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    1.938982] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.938987] usb usb2: Product: EHCI Host Controller

[    1.938992] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd

[    1.938997] usb usb2: SerialNumber: fc880000.usb

[    1.939181] hub 2-0:1.0: USB hub found

[    1.939196] hub 2-0:1.0: 1 port detected

[    1.939567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.939579] ohci-platform: OHCI generic platform driver

[    1.939749] ohci-platform fc840000.usb: Generic Platform OHCI controller

[    1.939820] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3

[    1.939872] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000

[    1.965585] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011

[    1.965769] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20

[    1.965788] pci_bus 0002:20: root bus resource [bus 20-2f]

[    1.965803] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]

[    1.965819] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])

[    1.965851] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]

[    1.965864] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]

[    1.965913] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400

[    1.965949] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]

[    1.966033] pci 0002:20:00.0: supports D1 D2

[    1.966045] pci 0002:20:00.0: PME# supported from D0 D1 D3hot

[    1.976719] pci 0002:20:00.0: Primary bus is hard wired to 0

[    1.976748] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring

[    1.977000] pci 0002:21:00.0: [10ec:8168] type 00 class 0x020000

[    1.977082] pci 0002:21:00.0: reg 0x10: initial BAR value 0x00000000 invalid

[    1.977095] pci 0002:21:00.0: reg 0x10: [io  size 0x0100]

[    1.977189] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]

[    1.977255] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]

[    1.977714] pci 0002:21:00.0: supports D1 D2

[    1.977727] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    1.995862] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21

[    1.995916] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]

[    1.995934] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]

[    1.995949] pci 0002:20:00.0: BAR 7: assigned [io  0x1000-0x1fff]

[    1.995970] pci 0002:21:00.0: BAR 4: assigned [mem 0xf2200000-0xf2203fff 64bit]

[    1.996028] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2204000-0xf2204fff 64bit]

[    1.996083] pci 0002:21:00.0: BAR 0: assigned [io  0x1000-0x10ff]

[    1.996109] pci 0002:20:00.0: PCI bridge to [bus 21]

[    1.996122] pci 0002:20:00.0:   bridge window [io  0x1000-0x1fff]

[    1.996137] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf22fffff]

[    1.999304] pcieport 0002:20:00.0: PME: Signaling with IRQ 156

[    1.999576] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded

[    1.999629] r8168 0002:21:00.0: enabling device (0000 -> 0003)

[    1.999636] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10

[    1.999642] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    1.999647] usb usb3: Product: Generic Platform OHCI controller

[    1.999654] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd

[    1.999659] usb usb3: SerialNumber: fc840000.usb

[    1.999854] hub 3-0:1.0: USB hub found

[    1.999870] hub 3-0:1.0: 1 port detected

[    2.000185] ohci-platform fc8c0000.usb: Generic Platform OHCI controller

[    2.000256] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4

[    2.000303] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000

[    2.008916] rk-pcie fe150000.pcie: PCIe Link up, LTSSM is 0x230011

[    2.009098] rk-pcie fe150000.pcie: PCI host bridge to bus 0000:00

[    2.009117] pci_bus 0000:00: root bus resource [bus 00-0f]

[    2.009131] pci_bus 0000:00: root bus resource [??? 0xf0000000-0xf00fffff flags 0x0]

[    2.009147] pci_bus 0000:00: root bus resource [io  0x100000-0x1fffff] (bus address [0xf0100000-0xf01fffff])

[    2.009160] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]

[    2.009173] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff pref]

[    2.009215] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400

[    2.009237] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]

[    2.009255] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]

[    2.009272] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]

[    2.009343] pci 0000:00:00.0: supports D1 D2

[    2.009356] pci 0000:00:00.0: PME# supported from D0 D1 D3hot

[    2.015932] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00

[    2.015952] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Random ether addr 1a:52:af:d3:ff:21

[    2.016483] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.

[    2.018592] r8168  Copyright (C) 2021 Realtek NIC software team <nicfae@realtek.com>

[    2.018592]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.

[    2.018592]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.

[    2.020092] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])

[    2.020192] pci 0000:01:00.0: [126f:2263] type 00 class 0x010802

[    2.020270] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]

[    2.020739] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)

[    2.039286] pci 0000:00:00.0: BAR 0: no space for [mem size 0x40000000]

[    2.039315] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x40000000]

[    2.039331] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000]

[    2.039344] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000]

[    2.039359] pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]

[    2.039374] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref]

[    2.039394] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bit]

[    2.039437] pci 0000:00:00.0: PCI bridge to [bus 01-ff]

[    2.039452] pci 0000:00:00.0:   bridge window [mem 0xf0200000-0xf02fffff]

[    2.042531] pcieport 0000:00:00.0: PME: Signaling with IRQ 167

[    2.043001] nvme nvme0: pci function 0000:01:00.0

[    2.043061] nvme 0000:01:00.0: enabling device (0000 -> 0002)

[    2.051992] ata1: SATA link down (SStatus 0 SControl 300)

[    2.059639] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10

[    2.059647] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.059653] usb usb4: Product: Generic Platform OHCI controller

[    2.059658] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd

[    2.059663] usb usb4: SerialNumber: fc8c0000.usb

[    2.059852] hub 4-0:1.0: USB hub found

[    2.059870] hub 4-0:1.0: 1 port detected

[    2.060493] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode

[    2.060503] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller

[    2.060577] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5

[    2.060667] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010

[    2.060691] xhci-hcd xhci-hcd.5.auto: irq 146, io mem 0xfc400000

[    2.060827] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10

[    2.060833] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.060838] usb usb5: Product: xHCI Host Controller

[    2.060843] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd

[    2.060848] usb usb5: SerialNumber: xhci-hcd.5.auto

[    2.061029] hub 5-0:1.0: USB hub found

[    2.061046] hub 5-0:1.0: 1 port detected

[    2.061178] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller

[    2.061241] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6

[    2.061250] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed

[    2.061283] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.

[    2.061331] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10

[    2.061337] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.061342] usb usb6: Product: xHCI Host Controller

[    2.061347] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd

[    2.061352] usb usb6: SerialNumber: xhci-hcd.5.auto

[    2.061526] hub 6-0:1.0: USB hub found

[    2.061541] hub 6-0:1.0: 1 port detected

[    2.061732] usbcore: registered new interface driver cdc_acm

[    2.061737] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

[    2.061827] usbcore: registered new interface driver uas

[    2.061882] usbcore: registered new interface driver usb-storage

[    2.061921] usbcore: registered new interface driver usbserial_generic

[    2.061933] usbserial: USB Serial support registered for generic

[    2.061951] usbcore: registered new interface driver cp210x

[    2.061961] usbserial: USB Serial support registered for cp210x

[    2.061995] usbcore: registered new interface driver ftdi_sio

[    2.062005] usbserial: USB Serial support registered for FTDI USB Serial Device

[    2.062094] usbcore: registered new interface driver keyspan

[    2.062104] usbserial: USB Serial support registered for Keyspan - (without firmware)

[    2.062115] usbserial: USB Serial support registered for Keyspan 1 port adapter

[    2.062125] usbserial: USB Serial support registered for Keyspan 2 port adapter

[    2.062136] usbserial: USB Serial support registered for Keyspan 4 port adapter

[    2.062156] usbcore: registered new interface driver option

[    2.062166] usbserial: USB Serial support registered for GSM modem (1-port)

[    2.062306] usbcore: registered new interface driver oti6858

[    2.062317] usbserial: USB Serial support registered for oti6858

[    2.062335] usbcore: registered new interface driver pl2303

[    2.062345] usbserial: USB Serial support registered for pl2303

[    2.062369] usbcore: registered new interface driver qcserial

[    2.062379] usbserial: USB Serial support registered for Qualcomm USB modem

[    2.062412] usbcore: registered new interface driver sierra

[    2.062423] usbserial: USB Serial support registered for Sierra USB modem

[    2.062869] usbcore: registered new interface driver usbtouchscreen

[    2.064009] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0

[    2.064256] i2c /dev entries driver

[    2.067922] vdd_cpu_big0_s0: supplied by vcc5v0_sys

[    2.075217] vdd_cpu_big1_s0: supplied by vcc5v0_sys

[    2.083553] vdd_npu_s0: supplied by vcc5v0_sys

[    2.089209] aw9523 2-005a: aw9523 no platdata

[    2.105806] aw9523 2-005a: aw9523 detected: 0x23

[    2.106070] aw9523-leds: Failed to locate of_node [id: -1]

[    2.106254] aw9523-gpio: Failed to locate of_node [id: -1]

[    2.109591] ....... dysun aw9523_gpio_probe

[    2.109642] aw9523-keypad: Failed to locate of_node [id: -1]

[    2.110626] dsi0 lt8912_parse_dt: DT property instance_id is 0

[    2.110692] lt8912_pwr_gpio= 1.

[    2.110712] lt8912_rst_gpio= 0

[    2.161607] nvme nvme0: allocated 64 MiB host memory buffer.

[    2.185994] nvme nvme0: 8/0/0 default/read/poll queues

[    2.191473]  nvme0n1: p1

[    2.215587] lt8912_rst_gpio= 1

[    2.215609]  irq gpio not provided

[    2.215697] failed to read byte data index=0

[    2.215710] LT8912_VAL_CHIP_REVISION_0 err, ret =-1,reg = 0x0,val = 0x0.

[    2.215779] failed to read byte data index=1

[    2.215791] LT8912_VAL_CHIP_REVISION_1 err, ret =-1,reg = 0x1,val = 0x0.

[    2.215800] dsi0 lt8912 check chip revision not match

[    2.215809] lt8912 check chip successful.

[    2.215880] lt8912_write: wr err: addr 0x48, reg 0xb2, val 0x1

[    2.215892] dsi0 lt8912_write_array: lt8912 reg write 01 to B2 failed.

[    2.215962] lt8912_write: wr err: addr 0x4a, reg 0x6, val 0x8

[    2.215974] dsi0 lt8912_write_array: lt8912 reg write 08 to 06 failed.

[    2.216044] lt8912_write: wr err: addr 0x4a, reg 0x7, val 0xf0

[    2.216056] dsi0 lt8912_write_array: lt8912 reg write F0 to 07 failed.

[    2.216125] lt8912_write: wr err: addr 0x4a, reg 0x9, val 0x0

[    2.216137] dsi0 lt8912_write_array: lt8912 reg write 00 to 09 failed.

[    2.216207] lt8912_write: wr err: addr 0x4a, reg 0xf, val 0x2b

[    2.216219] dsi0 lt8912_write_array: lt8912 reg write 2B to 0F failed.

[    2.216289] lt8912_write: wr err: addr 0x4a, reg 0x37, val 0x0

[    2.216301] dsi0 lt8912_write_array: lt8912 reg write 00 to 37 failed.

[    2.216371] lt8912_write: wr err: addr 0x4a, reg 0x36, val 0x18

[    2.216383] dsi0 lt8912_write_array: lt8912 reg write 18 to 36 failed.

[    2.216453] lt8912_write: wr err: addr 0x4a, reg 0x35, val 0x0

[    2.216465] dsi0 lt8912_write_array: lt8912 reg write 00 to 35 failed.

[    2.216685] lt8912_enable: enabling default audio configs

[    2.216696] lt8912's 720P hdmi mode---.

[    2.312256] usb 5-1: new high-speed USB device number 2 using xhci-hcd

[    2.454718] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91

[    2.454742] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.454756] usb 5-1: Product: USB2.1 Hub

[    2.454768] usb 5-1: Manufacturer: NearDi

[    2.509607] hub 5-1:1.0: USB hub found

[    2.509917] hub 5-1:1.0: 4 ports detected

[    2.575719] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd

[    2.595069] usb 6-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91

[    2.595095] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[    2.595108] usb 6-1: Product: USB3.2 Hub

[    2.595119] usb 6-1: Manufacturer: NearDi

[    2.621625] hub 6-1:1.0: USB hub found

[    2.621982] hub 6-1:1.0: 4 ports detected

[    2.652249] lt8912's 720P init mode---.

[    2.658500] rtc-hym8563 6-0051: rtc information is valid

[    2.664208] rtc-hym8563 6-0051: registered as rtc0

[    2.665281] rtc-hym8563 6-0051: setting system clock to 2022-12-30T08:21:17 UTC (1672388477)

[    2.668634] ttysWK0 at I/O 0x1 (irq = 178, base_baud = 460800) is a wk2xxx

[    2.668871] ttysWK1 at I/O 0x2 (irq = 178, base_baud = 460800) is a wk2xxx

[    2.669106] ttysWK2 at I/O 0x3 (irq = 178, base_baud = 460800) is a wk2xxx

[    2.669310] ttysWK3 at I/O 0x4 (irq = 178, base_baud = 460800) is a wk2xxx

[    2.685262] rkcifhw fdce0000.rkcif: Adding to iommu group 16

[    2.685822] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF

[    2.686056] rkcif rkcif-mipi-lvds: Adding to iommu group 16

[    2.686094] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a

[    2.686228] rkcif rkcif-mipi-lvds: attach to cif hw node

[    2.686243] rkcif rkcif-mipi-lvds: rkcif wait line 0

[    2.686256] : terminal subdev does not exist

[    2.686266] : terminal subdev does not exist

[    2.686276] : terminal subdev does not exist

[    2.686286] : terminal subdev does not exist

[    2.686297] : get_remote_sensor: video pad[0] is null

[    2.686307] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.686319] : get_remote_sensor: video pad[0] is null

[    2.686329] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.686339] : get_remote_sensor: video pad[0] is null

[    2.686348] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.686358] : get_remote_sensor: video pad[0] is null

[    2.686367] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.688468] rkcif rkcif-mipi-lvds2: Adding to iommu group 16

[    2.688506] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a

[    2.688609] rkcif rkcif-mipi-lvds2: attach to cif hw node

[    2.688623] rkcif rkcif-mipi-lvds2: rkcif wait line 0

[    2.688635] : terminal subdev does not exist

[    2.688645] : terminal subdev does not exist

[    2.688655] : terminal subdev does not exist

[    2.688664] : terminal subdev does not exist

[    2.688675] : get_remote_sensor: video pad[0] is null

[    2.688685] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.688695] : get_remote_sensor: video pad[0] is null

[    2.688705] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.688715] : get_remote_sensor: video pad[0] is null

[    2.688724] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.688734] : get_remote_sensor: video pad[0] is null

[    2.688744] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!

[    2.693166] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!

[    2.693186] rockchip-mipi-csi2: Async registered subdev

[    2.693200] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds!

[    2.693490] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!

[    2.693507] rockchip-mipi-csi2: Async registered subdev

[    2.693525] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!

[    2.694892] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14

[    2.695124] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0

[    2.695140] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps

[    2.695153] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property

[    2.695363] rkisp_hw fdcb0000.rkisp: no find phandle sram

[    2.695585] rkisp_hw fdcc0000.rkisp: Adding to iommu group 15

[    2.695879] rkisp_hw fdcc0000.rkisp: is_thunderboot: 0

[    2.695895] rkisp_hw fdcc0000.rkisp: max input:0x0@0fps

[    2.695908] rkisp_hw fdcc0000.rkisp: Missing rockchip,grf property

[    2.696119] rkisp_hw fdcc0000.rkisp: no find phandle sram

[    2.697074] rkisp rkisp0-vir0: rkisp driver version: v01.09.00

[    2.697388] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!

[    2.698910] rkisp rkisp1-vir0: rkisp driver version: v01.09.00

[    2.699216] rkisp rkisp1-vir0: Entity type for entity rkisp-isp-subdev was not initialized!

[    2.703153] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA

[    2.703196] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5

[    2.703780] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0

[    2.705390] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success

[    2.705444] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!

[    2.705747] usbcore: registered new interface driver uvcvideo

[    2.705759] USB Video Class driver (1.1.1)

[    2.708963] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property

[    2.710148] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!

[    2.711036] Bluetooth: HCI UART driver ver 2.3

[    2.711052] Bluetooth: HCI UART protocol H4 registered

[    2.711063] Bluetooth: HCI UART protocol ATH3K registered

[    2.711132] usbcore: registered new interface driver bfusb

[    2.711211] usbcore: registered new interface driver btusb

[    2.711843] cpu cpu0: leakage=14

[    2.713602] cpu cpu0: pvtm=1463

[    2.713826] cpu cpu0: pvtm-volt-sel=3

[    2.714696] cpu cpu4: leakage=11

[    2.720632] cpu cpu4: pvtm=1702

[    2.724370] cpu cpu4: pvtm-volt-sel=4

[    2.725014] cpu cpu6: leakage=11

[    2.730950] cpu cpu6: pvtm=1708

[    2.734697] cpu cpu6: pvtm-volt-sel=4

[    2.736583] cpu cpu0: avs=0

[    2.738426] cpu cpu4: avs=0

[    2.740320] cpu cpu6: avs=0

[    2.740925] cpu cpu0: EM: created perf domain

[    2.741055] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0

[    2.742392] cpu cpu4: EM: created perf domain

[    2.742476] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0

[    2.750176] cpu cpu6: EM: created perf domain

[    2.750806] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0

[    2.759880] sdhci: Secure Digital Host Controller Interface driver

[    2.759893] sdhci: Copyright(c) Pierre Ossman

[    2.759900] Synopsys Designware Multimedia Card Interface Driver

[    2.760576] sdhci-pltfm: SDHCI platform and OF driver helper

[    2.761121] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.

[    2.761167] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.

[    2.761185] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a

[    2.761238] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 85,32 bit host data width,256 deep fifo

[    2.762932] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq

[    2.762950] mmc_host mmc1: card is non-removable.

[    2.763251] ledtrig-cpu: registered to indicate activity on CPUs

[    2.763316] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.

[    2.763383] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....

[    2.764816] cryptodev: driver 1.12 loaded.

[    2.764873] hid: raw HID events driver (C) Jiri Kosina

[    2.765375] usbcore: registered new interface driver usbhid

[    2.765395] usbhid: USB HID core driver

[    2.771560] optee: probing for conduit method.

[    2.771601] optee: revision 3.13 (87d94c5e)

[    2.772362] optee: initialized driver

[    2.773568] usbcore: registered new interface driver snd-usb-audio

[    2.784328] input: headset-keys as /devices/platform/es8388-sound/input/input1

[    2.794035] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA

[    2.798539] ES8323 3-0011: ASoC: error at soc_component_write_no_lock on ES8323.3-0011: -5

[    2.836398] mmc0: new HS200 MMC card at address 0001

[    2.837296] mmcblk0: mmc0:0001 A3A561 57.6 GiB

[    2.837571] mmcblk0boot0: mmc0:0001 A3A561 partition 1 4.00 MiB

[    2.837820] mmcblk0boot1: mmc0:0001 A3A561 partition 2 4.00 MiB

[    2.838144] mmcblk0rpmb: mmc0:0001 A3A561 partition 3 16.0 MiB, chardev (236:0)

[    2.842655]  mmcblk0: p1 p2 p3 p4 p5 p6

[    2.850817] input: rockchip,es8388 Headset as /devices/platform/es8388-sound/sound/card0/input2

[    2.852341] Initializing XFRM netlink socket

[    2.852613] NET: Registered protocol family 10

[    2.853371] Segment Routing with IPv6

[    2.853412] NET: Registered protocol family 17

[    2.853426] NET: Registered protocol family 15

[    2.853432] can: controller area network core

[    2.853465] NET: Registered protocol family 29

[    2.853472] can: raw protocol

[    2.853479] can: broadcast manager protocol

[    2.853488] can: netlink gateway - max_hops=1

[    2.853836] Bluetooth: RFCOMM socket layer initialized

[    2.853852] Bluetooth: RFCOMM ver 1.11

[    2.853862] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[    2.853871] Bluetooth: HIDP socket layer initialized

[    2.853898] [BT_RFKILL]: Enter rfkill_rk_init

[    2.853904] [WLAN_RFKILL]: Enter rfkill_wlan_init

[    2.854439] [WLAN_RFKILL]: Enter rfkill_wlan_probe

[    2.854463] [WLAN_RFKILL]: can't find rockchip,grf property

[    2.854470] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275s

[    2.854476] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.

[    2.854482] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.

[    2.854500] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.

[    2.854522] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.

[    2.854531] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !

[    2.854536] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio

[    2.854543] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1

[    2.854549] [WLAN_RFKILL]: Exit rfkill_wlan_probe

[    2.855121] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.

[    2.855143] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.

[    2.855156] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.

[    2.855168] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.

[    2.855214] [BT_RFKILL]: Request irq for bt wakeup host

[    2.855271] [BT_RFKILL]: ** disable irq

[    2.855365] [BT_RFKILL]: bt_default device registered.

[    2.855438] Key type dns_resolver registered

[    2.856776] Loading compiled-in X.509 certificates

[    2.857392] pstore: Using crash dump compression: deflate

[    2.857668] rga3_core0 fdb60000.rga: Adding to iommu group 2

[    2.857895] rga: rga3_core0_irq, irq = 33, match scheduler

[    2.858459] rga: rga3_core0 driver loaded successfully ver:3.0.76831

[    2.858499] rga: rga3_core0 probe successfully

[    2.859145] rga3_core1 fdb70000.rga: Adding to iommu group 3

[    2.859418] rga: rga3_core1_irq, irq = 34, match scheduler

[    2.859916] rga: rga3_core1 driver loaded successfully ver:3.0.76831

[    2.859950] rga: rga3_core1 probe successfully

[    2.860555] rga: rga2_irq, irq = 35, match scheduler

[    2.860986] rga: rga2 driver loaded successfully ver:3.2.63318

[    2.861007] rga: rga2 probe successfully

[    2.861663] rga: Module initialized. v1.2.14

[    2.875634] usb 5-1.2: new full-speed USB device number 3 using xhci-hcd

[    2.878393] vendor storage:20190527 ret = 0

[    2.891707] mali fb000000.gpu: Kernel DDK version g12p0-01eac0

[    2.892590] mali fb000000.gpu: leakage=22

[    2.894261] mali fb000000.gpu: pvtm=883

[    2.894323] mali fb000000.gpu: pvtm-volt-sel=3

[    2.895331] mali fb000000.gpu: avs=0

[    2.897879] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.

[    2.898875] mali fb000000.gpu: GPU hardware issue table may need updating:

[    2.898875] r0p0 status 5 is unknown; treating as r0p0 status 0

[    2.898912] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0

[    2.899018] mali fb000000.gpu: No priority control manager is configured

[    2.899031] mali fb000000.gpu: No memory group manager is configured

[    2.899064] mali fb000000.gpu: Protected memory allocator not available

[    2.900581] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'

[    2.900598] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]

[    2.900810] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]

[    2.901024] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]

[    2.901243] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''

[    2.904241] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model

[    2.904413] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0

[    2.905844] mali fb000000.gpu: Probed as mali0

[    2.982551] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    2.997763] vcc_3v3_sd_s0: supplied by vcc_3v3_s3

[    2.998795] pcie20_avdd0v85: supplied by vdd_0v85_s0

[    2.999830] pcie20_avdd1v8: supplied by avcc_1v8_s0

[    3.000447] pcie30_avdd0v75: supplied by avdd_0v75_s0

[    3.001027] pcie30_avdd1v8: supplied by avcc_1v8_s0

[    3.001586] reg-fixed-voltage vcc3v3-lcd0-n: nonexclusive access to GPIO for vcc3v3-lcd0-n

[    3.001625] vcc3v3_lcd0_n: supplied by vcc_1v8_s0

[    3.002776] rockchip-csi2-dphy csi2-dcphy0: csi2 dphy0 probe successfully!

[    3.009634] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2

[    3.009673] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3

[    3.009731] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8

[    3.009763] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9

[    3.009791] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2

[    3.009814] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2

[    3.010652] [drm] failed to init overlay plane Cluster0-win1

[    3.010771] [drm] failed to init overlay plane Cluster1-win1

[    3.010898] [drm] failed to init overlay plane Cluster2-win1

[    3.011012] [drm] failed to init overlay plane Cluster3-win1

[    3.035491] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[    3.038142] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[    3.040803] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[    3.045245] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[    3.051432] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fe1618)

[    3.053600] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver

[    3.055273] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fe9378)

[    3.056823] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver

[    3.057994] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010fe9378)

[    3.058112] rockchip-drm display-subsystem: bound fde30000.dsi (ops 0xffffffc010feb278)

[    3.058212] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010feb6c0)

[    3.058344] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc010feb6c0)

[    3.058939] rockchip-drm display-subsystem: failed to parse loader memory

[    3.153953] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)

[    3.170434] dwmmc_rockchip fe2d0000.mmc: Successfully tuned phase to 135

[    3.175000] mmc1: new ultra high speed SDR104 SDIO card at address 0001

[    3.201376] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device

[    3.204452] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0

[    3.217694] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input3

[    3.222811] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.

[    3.222881] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.

[    3.222901] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a

[    3.222968] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 84,32 bit host data width,256 deep fifo

[    3.227033] rkcif rkcif-mipi-lvds: clear unready subdev num: 1

[    3.227086] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.227867] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.227905] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.227946] rkcif-mipi-lvds: Async subdev notifier completed

[    3.227961] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.227986] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.227998] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP

[    3.228016] rkcif rkcif-mipi-lvds2: clear unready subdev num: 1

[    3.228029] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.228794] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.228830] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.228871] rkcif-mipi-lvds2: Async subdev notifier completed

[    3.228915] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.228944] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.228956] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP

[    3.228976] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.229021] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.229033] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP

[    3.229052] rockchip-csi2-dphy0: No link between dphy and sensor

[    3.229091] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    3.229103] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP

[    3.231018] RKNPU fdab0000.npu: Adding to iommu group 0

[    3.231300] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode

[    3.231880] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]

[    3.231923] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]

[    3.231959] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]

[    3.232753] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1

[    3.234674] RKNPU fdab0000.npu: leakage=12

[    3.236007] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)

[    3.242224] RKNPU fdab0000.npu: pvtm=888

[    3.247425] RKNPU fdab0000.npu: pvtm-volt-sel=4

[    3.250616] RKNPU fdab0000.npu: avs=0

[    3.251243] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0

[    3.260259] RKNPU fdab0000.npu: failed to find power_model node

[    3.260319] RKNPU fdab0000.npu: RKNPU: failed to initialize power model

[    3.260339] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient

[    3.262783] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[    3.265452] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

[    3.266754] rockchip-pm rockchip-suspend: not set pwm-regulator-config

[    3.268551] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '19:42:11', on 'Sep 27 2022'.

[    3.269324] Mali:

[    3.269328] Mali device driver loaded

[    3.269347] rkisp rkisp0-vir0: clear unready subdev num: 1

[    3.269543] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

[    3.269556] cfg80211: failed to load regulatory.db

[    3.269676] rkisp0-vir0: Async subdev notifier completed

[    3.269689] rkisp rkisp1-vir0: clear unready subdev num: 1

[    3.269828] rkisp1-vir0: Async subdev notifier completed

[    3.269842] ALSA device list:

[    3.269851]   #0: rockchip,es8388

[    3.269859]   #1: rockchip,hdmiin

[    3.269866]   #2: rockchip-hdmi0

[    3.329368] dwhdmi-rockchip fde80000.hdmi: use tmds mode

[    3.329469] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800) for vp0 dclk: 148500000

[    3.330055] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2

[    3.330081] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000

[    3.330116] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 16(if:40) for vp3 dclk: 148500000

[    3.330157] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out3 div: 2 dclk_core3 div: 2

[    3.330173] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop3 to 148500000, get 148500000

[    3.330201] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000

[    3.330216] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000

[    3.330229] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000

[    3.330545] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!

[    3.330756] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!

[    3.330845] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode

[    3.349642] EXT4-fs (mmcblk0p6): 2 orphan inodes deleted

[    3.349661] EXT4-fs (mmcblk0p6): recovery complete

[    3.359279] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)

[    3.359358] VFS: Mounted root (ext4 filesystem) on device 179:6.

[    3.359985] devtmpfs: mounted

[    3.364363] Freeing unused kernel memory: 6336K

[    3.365635] Run /sbin/init as init process

[    3.502591] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented

Welcome to Ubuntu 22.04 LTS!

[    3.535657] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode

[    3.535775] ...... dysun 0 dsi_external_bradge_power_on

[    3.535786] ...... dysun 4 dw_mipi_dsi2_encoder_enable

[    3.569955] systemd-fstab-generator[268]: Ignoring "noauto" option for root device

[    3.742341] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_encoder_enable] final DSI-Link bandwidth: 990000 x 4 Kbps

[    3.869484] dwhdmi-rockchip fde80000.hdmi: use tmds mode

[  OK  ] Created slice Slice /system/modprobe.

[  OK  ] Created slice Slice /system/serial-getty.

[  OK  ] Created slice User and Session Slice.

[  OK  ] Started Forward Password R??uests to Wall Directory Watch.

[  OK  ] Reached target Remote File Systems.

[  OK  ] Reached target Slice Units.

[  OK  ] Reached target Swaps.

[  OK  ] Reached target Local Verity Protected Volumes.

[  OK  ] Listening on fsck to fsckd communication Socket.

[  OK  ] Listening on initctl Compatibility Named Pipe.

[  OK  ] Listening on Journal Socket (/dev/log).

[  OK  ] Listening on Journal Socket.

[  OK  ] Listening on udev Control Socket.

[  OK  ] Listening on udev Kernel Socket.

         Mounting /sys/kernel/debug...

         Mounting Kernel Trace File System...

systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.

(This warning is only shown for the first unit using IP firewalling.)

         Starting Journal Service...

         Starting Set the console keyboard layout...

         Starting Load Kernel Module configfs...

         Starting Load Kernel Module drm...

         Starting Load Kernel Module fuse...

         Starting Load Kernel Modules...

         Starting Remount Root and Kernel File Systems...

         Starting Coldplug All udev Devices...

[  OK  ] Mounted /sys/kernel/debug.

[  OK  ] Mounted Kernel Trace File System.

[  OK  ] Finished Load Kernel Module configfs.

[  OK  ] Finished Load Kernel Module drm.

[    4.070034] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)

[  OK  ] Finished Load Kernel Module fuse.

[  OK  ] Finished Remount Root and Kernel File Systems.

         Mounting FUSE Control File System...

         Mounting Kernel Configuration File System...

         Starting Load/Save Random Seed...

         Starting Create System Users...

systemd-modules-load.service: Failed with result 'exit-code'.

[FAILED] Failed to start Load Kernel Modules.

See 'systemctl status systemd-modules-load.service' for details.

[  OK  ] Mounted FUSE Control File System.

[  OK  ] Mounted Kernel Configuration File System.

         Starting Apply Kernel Variables...

[  OK  ] Finished Load/Save Random Seed.

[  OK  ] Finished Apply Kernel Variables.

[  OK  ] Finished Create System Users.

         Starting Create Static Device Nodes in /dev...

[  OK  ] Finished Create Static Device Nodes in /dev.

         Starting Rule-based Manage??for Device Events and Files...

[  OK  ] Finished Set the console keyboard layout.

[  OK  ] Reached target Preparation for Local File Systems.

         Mounting /tmp...

[  OK  ] Mounted /tmp.

[  OK  ] Reached target Local File Systems.

         Starting Set console font and keymap...

         Starting Tell Plymouth To Write Out Runtime Data...

[  OK  ] Finished Set console font and keymap.

[  OK  ] Started Journal Service.

         Starting Flush Journal to Persistent Storage...

[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.

[  OK  ] Started Rule-based Manager for Device Events and Files.

[  OK  ] Finished Coldplug All udev Devices.

[  OK  ] Started Dispatch Password ??ts to Console Directory Watch.

[  OK  ] Reached target Local Encrypted Volumes.

[  OK  ] Finished Flush Journal to Persistent Storage.

         Starting Create Volatile Files and Directories...

[  OK  ] Finished Create Volatile Files and Directories.

         Starting Network Name Resolution...

         Starting Network Time Synchronization...

         Starting Record System Boot/Shutdown in UTMP...

[  OK  ] Finished Record System Boot/Shutdown in UTMP.

[  OK  ] Created slice Slice /system/systemd-backlight.

         Starting Load/Save Screen ??ness of backlight:backlight...

[  OK  ] Finished Load/Save Screen ??htness of backlight:backlight.

[  OK  ] Started Network Time Synchronization.

[  OK  ] Reached target System Initialization.

[  OK  ] Started CUPS Scheduler.

[  OK  ] Started Trigger to poll fo??y enabled on GCP LTS non-pro).

[  OK  ] Started Start whoopsie on ??n of the /var/crash directory.

[  OK  ] Started Daily Cleanup of Temporary Directories.

[  OK  ] Started Ubuntu Advantage Timer for running repeated jobs.

[  OK  ] Reached target Path Units.

[  OK  ] Reached target System Time Set.

[  OK  ] Started Trigger anacron every hour.

[  OK  ] Started Daily apt download activities.

[  OK  ] Started Daily apt upgrade and clean activities.

[  OK  ] Started Daily dpkg database backup timer.

[  OK  ] Started Periodic ext4 Onli??ata Check for All Filesystems.

[  OK  ] Started Discard unused blocks once a week.

[  OK  ] Started Refresh fwupd metadata regularly.

[  OK  ] Started Daily man-db regeneration.

[  OK  ] Started Message of the Day.

[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.

[  OK  ] Listening on CUPS Scheduler.

[  OK  ] Listening on D-Bus System Message Bus Socket.

         Starting Socket activation for snappy daemon...

[  OK  ] Listening on triggerhappy.socket.

[  OK  ] Listening on Socket activation for snappy daemon.

[  OK  ] Reached target Socket Units.

[  OK  ] Reached target Basic System.

[  OK  ] Started Run anacron jobs.

         Starting LSB: automatic crash report generation...

         Starting enable ASYNC for Ubuntu Display...

[    4.476783] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    4.476793] stream_cif_mipi_id1: update sensor info failed -1         Starting A9vahi mDNS/DNS-SD Stack...

[    4.477143] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.477148] stream_cif_mipi_id2: update sensor info failed -19

[    4.477773] rkci         Starting Blfuetooth management mechanism-...

mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.477779] rkcif_tools_id2: update sensor info failed -19

[    4.478173] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    4.47[  OK  ] Started D-Bus System Message Bus.

8179] rkcif_scale_ch0: update sensor info failed -19

[    4.479435] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    4.479440] stream_cif_mipi_id0: update sensor info failed -19

[    4.479456] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    4.479460] stream_cif_mipi_id3: update sensor info failed -19

[    4.483006] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    4.483020] rkcif_scale_ch1: update sensor info failed -19

[    4.483119] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    4.483129] rkcif_scale_ch3: update sensor info failed -19

[    4.484426] rkcif-mipi-lvds: rkcif_update_sensor_info: s         Starting tNetwork Manager...

ream[1] get remote terminal sensor failed!

[    4.484436] rkcif_tools_id1: update sensor info failed -19

[    4.487087] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    4.487092] rkcif_tools_id0: update sensor info failed -19

[    4.487748] rkcif-mip         Starting Remove Stale Onli??t4 Metadata Check Snapshots...

i-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    4.487754] stream_cif_mipi_id1: update sensor info failed -19

[    4.489315] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.489321] rkcif_scale_ch2: update sensor info failed -19

[    4.491274] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.491280] stream_cif_mipi_id2: update sensor info failed -19

[    4.494522] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    4.494529] rkcif_scale_ch1: update sensor info failed -19

[    4.494808] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    4.494818] stream_cif_mipi_id3: update sensor info failed -19

[          Starting Dispatcher daemon for systemd-networkd...

   4.496707] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote te         Starting Authorization Manager...

rminal sensor failed!

[    4.496719] stream_cif_mipi_id0: update sensor info failed -19

[    4.498133] rkcif-mipi-lvds2: rkcif_u         Starting pdPower Profiles daemon..at

e_sensor_info: stream[3] get remote terminal sensor failed!

c    4.498143] rkcif_scale_[  OK  ] Started Resize disk for rockchcip platform.

 h3: update sensor info failed -19

[    4.498769] rkcif-mipi-         Starting rkisp 3A engine...

lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    4         Starting Snap Daemon...

.498776] rkcif_scale_ch0: update sensor info failed -19

[    4.505576] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.505590] rkcif_tools_id2: update sensor info failed -19

[    4.506101] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    4.506107] rkcif_scale_ch2: update sensor info failed -19

[    4.512768] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    4.512774] rkcif_tools_id1: update sensor info failed -19

[    4.513973] rkcif-mipi-lvds2: rkcif_update_sensor_info[  OK  ] Reached target User and Group Name Lookups.

[DEPEND] Dependency failed for  stream[0] get remote ter[m0i;n1a39mSSSD NSSl sensor failed!

[  Service responder socket .

[DEPEND ] Dependency failed for SSSD??toFS Service respo nder socket.

[DEPEND] Dependency failed for SSSD PAC4.513979] rkcif_tools_id0: update sensor info failed -19

 Service responder socket.

[DEPEND] Dependency failed for SSSD??vice responder private socket.

[DEPEND] Dependency failed for SSSD PAM Service responder socket.

[DEPEND] Dependency failed for SSSD SSH Service responder socket.

[DEPEND] Dependency failed for SSSD Sudo Service responder socket.

         Starting Accounts Service...

[  OK  ] Started Regular background program processing daemon.

         Starting Switcheroo Control Proxy service...

         Starting User Login Management...

         Starting triggerhappy global hotkey daemon...

         Starting Disk Manager...

         Starting WPA supplicant...

[  OK  ] Started enable ASYNC for Ubuntu Display.

[  OK  ] Started rkisp 3A engine.

[  OK  ] Found device /dev/ttyFIQ0.

[  OK  ] Started Network Name Resolution.

[  OK  ] Started triggerhappy global hotkey daemon.

[  OK  ] Finished Remove Stale Onli??ext4 Metadata Check Snapshots.

[  OK  ] Started LSB: automatic crash report generation.

[  OK  ] Reached target Host and Network Name Lookups.

[  OK  ] Listening on Load/Save RF ??itch Status /dev/rfkill Watch.

[  OK  ] Started Setup rockchip platform environment.

         Starting LSB: GNOME Display Manager...

         Starting Load/Save RF Kill Switch Status...

[  OK  ] Started LSB: GNOME Display Manager.

[  OK  ] Started Load/Save RF Kill Switch Status.

[    4.877082] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add

[  OK  ] Started User Login Management.

[  OK  ] Started Avahi mDNS/DNS-SD Stack.

[  OK  ] Started WPA supplicant.

[  OK  ] Started Switcheroo Control Proxy service.

[  OK  ] Started Network Manager.

[  OK  ] Reached target Network.

[  OK  ] Reached target Network is Online.

[  OK  ] Started Download data for ??ailed at package install time.

[  OK  ] Started Check to see wheth??w version of Ubuntu available.

[  OK  ] Reached target Timer Units.

         Starting Save/Restore Sound Card State...

         Starting CUPS Scheduler...

         Starting Tool to automatic??mit kernel crash signatures...

         Starting OpenVPN service...

         Starting /etc/rc.local Compatibility...

         Starting Setup rockchip platform environment...

         Starting OpenBSD Secure Shell server...

         Starting Permit User Sessions...

[  OK  ] Started Unattended Upgrades Shutdown.

[  OK  ] Finished OpenVPN service.

[  OK  ] Started /etc/rc.local Compatibility.

[  OK  ] Started Authorization Manager.

[  OK  ] Started Power Profiles daemon.

         Starting Modem Manager...

[  OK  ] Finished Permit User Sessions.

         Starting adbd for ubuntu...

         Starting Light Display Manager...

         Starting Hold until boot process finishes up...

[  OK  ] Finished Save/Restore Sound Card State.

[  OK  ] Finished Hold until boot process finishes up.

[  OK  ] Reached target Sound Card.

[  OK  ] Started Serial Getty on ttyFIQ0.

[    4.966666] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.12 (wlan=r892223-20210928-1)

[    4.966950] [dhd] STATIC-MSG) dhd_init_wlan_mem :         Starting Set console scheme...

 prealloc ok for index 0: 8131584(7941K)

         Starting Hostname Service...

[  OK  ] Finished Set console scheme.

[  OK  ] Created slice Slice /system/getty.

[  OK  ] Started Getty on tty1.

[  OK  ] Reached target Login Prompts.

[  OK  ] Started Tool to automatica??ubmit kernel crash signatures.

[  OK  ] Started Hostname Service.

[  OK  ] Started Light Display Manager.

[    5.217781] Filesystem uses "xz" compression. This is not supported

         Starting Network Manager Script Dispatcher Service...

[  OK  ] Started Accounts Service.

[  OK  ] Started OpenBSD Secure Shell server.

[  OK  ] Started Network Manager Script Dispatcher Service.

         Starting Manage, Install and Generate Color Profiles...

[  OK  ] Started Dispatcher daemon for systemd-networkd.

[  OK  ] Started Disk Manager.

[  OK  ] Started Snap Daemon.

         Starting Wait until snapd is fully seeded...

[  OK  ] Started Modem Manager.

         Starting Time & Date Service...

[    5.461953] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 3, size 139264

[    5.461978] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 4, size 0

[    5.467257] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 7, size 33696

[    5.467284] [dhd] dhd_conf_set_chiprev : devid=0xaae8, chip=0xaae8, chiprev=2

[    5.467311] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 0, size 10320

[    5.467590] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 5, size 65536

[    5.467817] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 19, size 65712

[    5.467834] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 20, size 262144

[    5.467853] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 22, size 65536

[    5.475200] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 1, size 10300

[    5.475217] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 2, size 65536

[    5.475923] [dhd][wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1

[FAILED] Failed to start Bluetooth management mechanism.

See 'systemctl status blueman-mechanism.service' for details.

[  OK  ] Started Time & Date Service.

[  OK  ] Started Manage, Install and Generate Color Profiles.

[    5.582269] [dhd][wlan0] wl_android_wifi_off : out

[  OK  ] Reached target Hardware activated USB gadget.

[  OK  ] Finished Wait until snapd is fully seeded.

[    5.714344] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported

[    5.714366] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported

[    5.714373] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported

[  OK  ] Started Setup rockchip platform environment.

[  OK  ] Started CUPS Scheduler.

[  OK  ] Started Make remote CUPS printers availa[ble locally.

    5.784372] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty

[FAILED] Failed to start adbd for ubuntu.

See 'systemctl status adbd.service' for details.

[  OK  ] Reached target Multi-User System.

[  OK  ] Reached target Graphical Interface.

         Starting Record Runlevel Change in UTMP...

[  OK  ] Finished Record Runlevel Change in UTMP.

Ubuntu 22.04 LTS LPA3588 ttyFIQ0

LPA3588 login: root (automatic login)

Welcome to Ubuntu 22.04 LTS (GNU/Linux 5.10.66 aarch64)

 * Documentation:  https://help.ubuntu.com

 * Management:     https://landscape.canonical.com

 * Support:        https://ubuntu.com/advantage

This system has been minimized by removing packages and content that are

not required on a system that users do not log into.

To restore this content, you can run the 'unminimize' command.

0 updates can be applied immediately.

Last login: Fri Dec 30 08:06:00 UTC 2022 on ttyFIQ0

[    6.638392] configfs-gadget fc000000.usb: failed to start rockchip: -19

root@LPA3588:~# [    7.665004] configfs-gadget fc000000.usb: failed to start rockchip: -19

[    9.216595] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.216611] stream_cif_mipi_id0: update sensor info failed -19

[    9.217045] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.217051] stream_cif_mipi_id1: update sensor info failed -19

[    9.217298] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.217303] rkcif_tools_id2: update sensor info failed -19

[    9.217551] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.217557] stream_cif_mipi_id2: update sensor info failed -19

[    9.217800] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.217805] stream_cif_mipi_id3: update sensor info failed -19

[    9.218043] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.218048] rkcif_scale_ch0: update sensor info failed -19

[    9.218292] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.218297] rkcif_scale_ch1: update sensor info failed -19

[    9.218538] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.218543] rkcif_scale_ch2: update sensor info failed -19

[    9.218790] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.218795] rkcif_scale_ch3: update sensor info failed -19

[    9.222289] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.222296] rkcif_tools_id0: update sensor info failed -19

[    9.222777] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.222782] rkcif_tools_id1: update sensor info failed -19

[    9.223197] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.223202] stream_cif_mipi_id0: update sensor info failed -19

[    9.223695] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.223700] stream_cif_mipi_id1: update sensor info failed -19

[    9.224217] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.224223] stream_cif_mipi_id2: update sensor info failed -19

[    9.224689] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.224695] stream_cif_mipi_id3: update sensor info failed -19

[    9.226704] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.226710] rkcif_scale_ch0: update sensor info failed -19

[    9.227085] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.227090] rkcif_scale_ch1: update sensor info failed -19

[    9.227447] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.227453] rkcif_scale_ch2: update sensor info failed -19

[    9.227796] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.227801] rkcif_scale_ch3: update sensor info failed -19

[    9.228143] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.228147] rkcif_tools_id0: update sensor info failed -19

[    9.228486] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.228490] rkcif_tools_id1: update sensor info failed -19

[    9.229679] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.229685] rkcif_tools_id2: update sensor info failed -19

[    9.425856] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.425868] stream_cif_mipi_id0: update sensor info failed -19

[    9.425968] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.425973] stream_cif_mipi_id1: update sensor info failed -19

[    9.426069] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.426073] rkcif_tools_id2: update sensor info failed -19

[    9.426166] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.426171] stream_cif_mipi_id2: update sensor info failed -19

[    9.426262] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.426267] stream_cif_mipi_id3: update sensor info failed -19

[    9.426357] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.426362] rkcif_scale_ch0: update sensor info failed -19

[    9.426454] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.426458] rkcif_scale_ch1: update sensor info failed -19

[    9.426550] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.426554] rkcif_scale_ch2: update sensor info failed -19

[    9.426648] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.426653] rkcif_scale_ch3: update sensor info failed -19

[    9.426746] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.426750] rkcif_tools_id0: update sensor info failed -19

[    9.426841] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.426845] rkcif_tools_id1: update sensor info failed -19

[    9.426949] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.426953] stream_cif_mipi_id0: update sensor info failed -19

[    9.427047] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.427051] stream_cif_mipi_id1: update sensor info failed -19

[    9.427143] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.427147] stream_cif_mipi_id2: update sensor info failed -19

[    9.427238] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.427242] stream_cif_mipi_id3: update sensor info failed -19

[    9.427335] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.427339] rkcif_scale_ch0: update sensor info failed -19

[    9.427435] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.427439] rkcif_scale_ch1: update sensor info failed -19

[    9.427473] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.427480] stream_cif_mipi_id0: update sensor info failed -19

[    9.427537] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.427541] rkcif_scale_ch2: update sensor info failed -19

[    9.427575] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!

[    9.427579] stream_cif_mipi_id1: update sensor info failed -19

[    9.427634] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!

[    9.427638] rkcif_scale_ch3: update sensor info failed -19

[    9.427671] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.427675] rkcif_tools_id2: update sensor info failed -19

[    9.427730] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!

[    9.427734] rkcif_tools_id0: update sensor info failed -19

[    9.427766] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!

[    9.427770] stream_cif_mipi_id2: update sensor info failed -19