Project

General

Profile

Issues #211 » ssd_ok_20221230_162325.txt

振华, 12/30/2022 04:46 PM

 
1
DDR Version V1.07 20220412
2
LPDDR4X, 2112MHz
3
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
4
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
5
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
6
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
7
change to F1: 528MHz
8
change to F2: 1068MHz
9
change to F3: 1560MHz
10
change to F0: 2112MHz
11
out
12
U-Boot SPL board init
13
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
14
Failed to set cpub01
15
Failed to set cpub23
16
unknown raw ID phN
17
unrecognized JEDEC id bytes: 00, 00, 00
18
Trying to boot from MMC2
19
MMC: no card present
20
mmc_init: -123, time 0
21
spl: mmc init failed with error: -123
22
Trying to boot from MMC1
23
Trying fit image at 0x4000 sector
24
## Verified-boot: 0
25
## Checking atf-1 0x00040000 ... sha256(5ae6932916...) + OK
26
## Checking uboot 0x00200000 ... sha256(0a90d64870...) + OK
27
## Checking fdt 0x00327780 ... sha256(c07f4a4d71...) + OK
28
## Checking atf-2 0x000f0000 ... sha256(c00c7fd75b...) + OK
29
## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
30
## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
31
## Checking optee 0x08400000 ... sha256(4ed9cd20b5...) + OK
32
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
33
Total: 114.524 ms
34

    
35
INFO:    Preloader serial: 2
36
NOTICE:  BL31: v2.3():v2.3-384-g45c8fcb44:derrick.huang
37
NOTICE:  BL31: Built : 15:14:04, Jun 18 2022
38
INFO:    ext 32k is not valid
39
INFO:    GICv3 without legacy support detected.
40
INFO:    ARM GICv3 driver initialized in EL3
41
INFO:    system boots from cpu-hwid-0
42
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
43
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
44
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
45
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
46
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
47
INFO:    BL31: Initialising Exception Handling Framework
48
INFO:    BL31: Initializing runtime services
49
INFO:    BL31: Initializing BL32
50
INFO:    hdmirx_handler: dma not on, ret
51
I/TC:
52
I/TC: OP-TEE version: 3.13.0-645-g87d94c5ef8 #xb.wang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #1 Tue Jun 14 10:44:31 CST 2022 aarch64
53
I/TC: Primary CPU initializing
54
I/TC: Primary CPU switching to normal world boot
55
INFO:    BL31: Preparing for EL3 exit to normal world
56
INFO:    Entry point address = 0x200000
57
INFO:    SPSR = 0x3c9
58

    
59

    
60
U-Boot 2017.09 (Sep 28 2022 - 10:36:47 +0800)
61

    
62
Model: Rockchip RK3588 Evaluation Board
63
PreSerial: 2, raw, 0xfeb50000
64
DRAM:  7.7 GiB
65
Sysmem: init
66
Relocation Offset: edb4f000
67
Relocation fdt: eb9fa468 - eb9fece8
68
CR: M/C/I
69
Using default environment
70

    
71
mmc@fe2c0000: 1, mmc@fe2e0000: 0
72
Bootdev(atags): mmc 0
73
MMC0: HS200, 200Mhz
74
PartType: EFI
75
DM: v2
76
boot mode: None
77
FIT: no signed, no conf required
78
DTB: rk-kernel.dtb
79
HASH(c): OK
80
Pre-reloc: vcc_mipicsi1
81
I2c0 speed: 100000Hz
82
en-gpios- not found!
83
vdd_cpu_big0_s0 800000 uV
84
en-gpios- not found!
85
vdd_cpu_big1_s0 800000 uV
86
I2c1 speed: 100000Hz
87
en-gpios- not found!
88
vdd_npu_s0 800000 uV
89
spi2: RK806: 2
90
ON=0x00, OFF=0x00
91
vdd_gpu_s0 750000 uV
92
vdd_cpu_lit_s0 750000 uV
93
vdd_log_s0 750000 uV
94
vdd_vdenc_s0 init 750000 uV
95
vdd_ddr_s0 850000 uV
96
Model: Rockchip RK3588 LZ160Update LP4 X10 Board
97
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
98
  b0pll 24000 KHz
99
  b1pll 24000 KHz
100
  lpll 24000 KHz
101
  v0pll 24000 KHz
102
  aupll 786431 KHz
103
  cpll 1500000 KHz
104
  gpll 1188000 KHz
105
  npll 850000 KHz
106
  ppll 1100000 KHz
107
  aclk_center_root 702000 KHz
108
  pclk_center_root 100000 KHz
109
  hclk_center_root 396000 KHz
110
  aclk_center_low_root 500000 KHz
111
  aclk_top_root 594000 KHz
112
  pclk_top_root 100000 KHz
113
  aclk_low_top_root 396000 KHz
114
Net:   eth1: ethernet@fe1c0000
115
Hit key to stop autoboot('CTRL+C'):  0
116
ANDROID: reboot reason: "(none)"
117
optee api revision: 2.0
118
TEEC: Waring: Could not find security partition
119
Not AVB images, AVB skip
120
No valid android hdr
121
Android image load failed
122
Android boot failed, error -1.
123
## Booting FIT Image at 0xe99e0640 with size 0x01e18e00
124
Fdt Ramdisk skip relocation
125
## Loading kernel from FIT Image at e99e0640 ...
126
   Using 'conf' configuration
127
## Verified-boot: 0
128
   Trying 'kernel' kernel subimage
129
     Description:  unavailable
130
     Type:         Kernel Image
131
     Compression:  uncompressed
132
     Data Start:   0xe9a09240
133
     Data Size:    31392256 Bytes = 29.9 MiB
134
     Architecture: AArch64
135
     OS:           Linux
136
     Load Address: 0x00400000
137
     Entry Point:  0x00400000
138
     Hash algo:    sha256
139
     Hash value:   b4a7fe949d802f5e55d1c3dea8344db537d47b0194e32b40afee1dc4045314f2
140
   Verifying Hash Integrity ... sha256+ OK
141
## Loading fdt from FIT Image at e99e0640 ...
142
   Using 'conf' configuration
143
   Trying 'fdt' fdt subimage
144
     Description:  unavailable
145
     Type:         Flat Device Tree
146
     Compression:  uncompressed
147
     Data Start:   0xe99e0e40
148
     Data Size:    164700 Bytes = 160.8 KiB
149
     Architecture: AArch64
150
     Load Address: 0x0a100000
151
     Hash algo:    sha256
152
     Hash value:   7912643392b97e6eed5c1fa43e78efd0ba47e8fb1087ae74bc9b1c6bf0beda2d
153
   Verifying Hash Integrity ... sha256+ OK
154
   Loading fdt from 0x0a100000 to 0x0a100000
155
   Booting using the fdt blob at 0x0a100000
156
   Loading Kernel Image from 0xe9a09240 to 0x00400000 ... OK
157
   kernel loaded at 0x00400000, end = 0x021f0200
158
  'reserved-memory' cma: addr=10000000 size=10000000
159
   Using Device Tree in place at 000000000a100000, end 000000000a12b35b
160
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
161
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
162
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
163
Total: 522.717 ms
164

    
165
Starting kernel ...
166

    
167
[    0.638429] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
168
[    0.638451] Linux version 5.10.66 (xuzhenhua@ubuntu2004) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP Tue Sep 27 19:40:35 CST 2022
169
[    0.649818] Machine model: Rockchip RK3588 LZ160Update LP4 X10 Board
170
[    0.649886] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
171
[    0.654084] printk: bootconsole [uart8250] enabled
172
[    0.657120] efi: UEFI not found.
173
[    0.663421] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
174
[    0.664484] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
175
[    0.665625] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
176
[    0.666359] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
177
[    0.807485] Zone ranges:
178
[    0.807724]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
179
[    0.808291]   DMA32    empty
180
[    0.808557]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
181
[    0.809122] Movable zone start for each node
182
[    0.809513] Early memory node ranges
183
[    0.809842]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
184
[    0.810415]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
185
[    0.810985]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
186
[    0.811556] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
187
[    0.855903] psci: probing for conduit method from DT.
188
[    0.856373] psci: PSCIv1.1 detected in firmware.
189
[    0.856793] psci: Using standard PSCI v0.2 function IDs
190
[    0.857269] psci: Trusted OS migration not required
191
[    0.857716] psci: SMC Calling Convention v1.2
192
[    0.858490] percpu: Embedded 30 pages/cpu s83816 r8192 d30872 u122880
193
[    0.859278] Detected VIPT I-cache on CPU0
194
[    0.859686] CPU features: detected: GIC system register CPU interface
195
[    0.860275] CPU features: detected: Virtualization Host Extensions
196
[    0.860844] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
197
[    0.861484] alternatives: patching kernel code
198
[    0.862177] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
199
[    0.862807] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.verifiedbootstate=orange rw rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTUUID=614e0000-0000
200
[    0.865998] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
201
[    0.867104] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
202
[    0.867818] mem auto-init: stack:off, heap alloc:off, heap free:off
203
[    0.874506] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
204
[    0.943285] Memory: 7591608K/8108032K available (15232K kernel code, 3200K rwdata, 5760K rodata, 6336K init, 520K bss, 254280K reserved, 262144K cma-reserved)
205
[    0.944709] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
206
[    0.945334] ftrace: allocating 57903 entries in 227 pages
207
[    1.039751] ftrace: allocated 227 pages with 5 groups
208
[    1.040496] rcu: Hierarchical RCU implementation.
209
[    1.040929] rcu:     RCU event tracing is enabled.
210
[    1.041343]  Rude variant of Tasks RCU enabled.
211
[    1.041757] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
212
[    1.047627] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
213
[    1.050473] GICv3: GIC: Using split EOI/Deactivate mode
214
[    1.050953] GICv3: 480 SPIs implemented
215
[    1.051305] GICv3: 0 Extended SPIs implemented
216
[    1.051737] GICv3: Distributor has no Range Selector support
217
[    1.052257] GICv3: 16 PPIs implemented
218
[    1.052641] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
219
[    1.053392] ITS [mem 0xfe640000-0xfe65ffff]
220
[    1.053824] ITS@0x00000000fe640000: allocated 8192 Devices @1001f0000 (indirect, esz 8, psz 64K, shr 0)
221
[    1.054702] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100200000 (flat, esz 2, psz 64K, shr 0)
222
[    1.055646] ITS: using cache flushing for cmd queue
223
[    1.056122] ITS [mem 0xfe660000-0xfe67ffff]
224
[    1.056544] ITS@0x00000000fe660000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
225
[    1.057418] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
226
[    1.058362] ITS: using cache flushing for cmd queue
227
[    1.058967] GICv3: using LPI property table @0x0000000100240000
228
[    1.059624] GIC: using cache flushing for LPI property table
229
[    1.060143] GICv3: CPU0: using allocated LPI pending table @0x0000000100250000
230
[    1.060955] random: get_random_bytes called from start_kernel+0x3dc/0x5c8 with crng_init=0
231
[    1.182338] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
232
[    1.183643] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
233
[    1.184629] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
234
[    1.186504] Console: colour dummy device 80x25
235
[    1.186936] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
236
[    1.187878] pid_max: default: 32768 minimum: 301
237
[    1.188435] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
238
[    1.189146] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
239
[    1.191465] rcu: Hierarchical SRCU implementation.
240
[    1.192742] Platform MSI: msi-controller@fe640000 domain created
241
[    1.193330] Platform MSI: msi-controller@fe660000 domain created
242
[    1.194191] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
243
[    1.194970] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
244
[    1.195855] EFI services will not be available.
245
[    1.196597] smp: Bringing up secondary CPUs ...
246
I/TC: Secondary CPU 1 initializing
247
I/TC: Secondary CPU 1 switching to normal world boot
248
I/TC: Secondary CPU 2 initializing
249
I/TC: Secondary CPU 2 switching to normal world boot
250
I/TC: Secondary CPU 3 initializing
251
I/TC: Secondary CPU 3 switching to normal world boot
252
I/TC: Secondary CPU 4 initializing
253
I/TC: Secondary CPU 4 switching to normal world boot
254
I/TC: Secondary CPU 5 initializing
255
I/TC: Secondary CPU 5 switching to normal world boot
256
I/TC: Secondary CPU 6 initializing
257
I/TC: Secondary CPU 6 switching to normal world boot
258
I/TC: Secondary CPU 7 initializing
259
I/TC: Secondary CPU 7 switching to normal world boot
260
[    1.198250] Detected VIPT I-cache on CPU1
261
[    1.198285] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
262
[    1.198303] GICv3: CPU1: using allocated LPI pending table @0x0000000100260000
263
[    1.198344] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
264
[    1.199610] Detected VIPT I-cache on CPU2
265
[    1.199640] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
266
[    1.199657] GICv3: CPU2: using allocated LPI pending table @0x0000000100270000
267
[    1.199697] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
268
[    1.200954] Detected VIPT I-cache on CPU3
269
[    1.200981] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
270
[    1.200998] GICv3: CPU3: using allocated LPI pending table @0x0000000100280000
271
[    1.201035] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
272
[    1.202274] CPU features: detected: Spectre-v4
273
[    1.202278] Detected PIPT I-cache on CPU4
274
[    1.202293] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
275
[    1.202302] GICv3: CPU4: using allocated LPI pending table @0x0000000100290000
276
[    1.202325] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
277
[    1.203530] Detected PIPT I-cache on CPU5
278
[    1.203546] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
279
[    1.203556] GICv3: CPU5: using allocated LPI pending table @0x00000001002a0000
280
[    1.203580] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
281
[    1.204823] Detected PIPT I-cache on CPU6
282
[    1.204838] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
283
[    1.204847] GICv3: CPU6: using allocated LPI pending table @0x00000001002b0000
284
[    1.204871] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
285
[    1.206056] Detected PIPT I-cache on CPU7
286
[    1.206071] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
287
[    1.206080] GICv3: CPU7: using allocated LPI pending table @0x00000001002c0000
288
[    1.206104] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
289
[    1.206170] smp: Brought up 1 node, 8 CPUs
290
[    1.222760] SMP: Total of 8 processors activated.
291
[    1.223192] CPU features: detected: Privileged Access Never
292
[    1.223699] CPU features: detected: User Access Override
293
[    1.224187] CPU features: detected: 32-bit EL0 Support
294
[    1.224656] CPU features: detected: Common not Private translations
295
[    1.225235] CPU features: detected: RAS Extension Support
296
[    1.225727] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
297
[    1.226511] CPU features: detected: CRC32 instructions
298
[    1.226978] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
299
[    1.227616] CPU features: detected: RCpc load-acquire (LDAPR)
300
[    1.228222] CPU: All CPU(s) started at EL2
301
[    1.229961] devtmpfs: initialized
302
[    1.240498] Registered cp15_barrier emulation handler
303
[    1.240966] Registered setend emulation handler
304
[    1.241455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
305
[    1.242357] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
306
[    1.245420] pinctrl core: initialized pinctrl subsystem
307
[    1.246157] DMI not present or invalid.
308
[    1.246614] NET: Registered protocol family 16
309
[    1.247868] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
310
[    1.248609] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
311
[    1.249912] thermal_sys: Registered thermal governor 'fair_share'
312
[    1.249915] thermal_sys: Registered thermal governor 'step_wise'
313
[    1.250472] thermal_sys: Registered thermal governor 'user_space'
314
[    1.251021] thermal_sys: Registered thermal governor 'power_allocator'
315
[    1.251700] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
316
[    1.253054] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
317
[    1.253820] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
318
[    1.254575] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
319
[    1.255332] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
320
[    1.256090] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
321
[    1.256836] cpuidle: using governor menu
322
[    1.257205] Registered FIQ tty driver
323
[    1.257695] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
324
[    1.258424] ASID allocator initialised with 65536 entries
325
[    1.260369] printk: console [ramoops-1] enabled
326
[    1.260792] pstore: Registered ramoops as persistent store backend
327
[    1.261356] ramoops: using 0xf0000@0x110000, ecc: 0
328
[    1.306331] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
329
[    1.307182] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
330
[    1.308008] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
331
[    1.308841] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
332
[    1.309691] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
333
[    1.310316] rockchip-pinctrl pinctrl: probed pinctrl
334
[    1.324537] fiq_debugger fiq_debugger.0: IRQ fiq not found
335
[    1.325043] fiq_debugger fiq_debugger.0: IRQ wakeup not found
336
[    1.325565] fiq_debugger_probe: could not install nmi irq handler
337
[ [    1.326162] printk: console [ttyFIQ0] enabled
338
   1.326162] printk: console [ttyFIQ0] enabled
339
[    1.326940] printk: bootconsole [uart8250] disabled
340
[    1.326940] printk: bootconsole [uart8250] disabled
341
[    1.327473] Registered fiq debugger ttyFIQ0
342
[    1.327823] vcc5v0_sys: supplied by vcc12v_dcin
343
[    1.327954] vcc5v0_usbdcin: supplied by vcc12v_dcin
344
[    1.328070] vcc5v0_usb: supplied by vcc5v0_usbdcin
345
[    1.328191] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
346
[    1.328436] vbus5v0_typec: supplied by vcc5v0_usb
347
[    1.328568] vcc3v3_pcie30: supplied by vcc12v_dcin
348
[    1.328674] vcc5v0_host: supplied by vcc5v0_usb
349
[    1.329132] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
350
[    1.329142] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
351
[    1.329411] iommu: Default domain type: Translated
352
[    1.329490] rk_iommu fdab9000.iommu: version = 2
353
[    1.329864] rk_iommu fdb50800.iommu: version = 2
354
[    1.330098] rk_iommu fdb60f00.iommu: version = 2
355
[    1.330279] rk_iommu fdb70f00.iommu: version = 2
356
[    1.330436] rk_iommu fdb90480.iommu: version = 2
357
[    1.330616] rk_iommu fdba0800.iommu: version = 2
358
[    1.330791] rk_iommu fdba4800.iommu: version = 2
359
[    1.330970] rk_iommu fdba8800.iommu: version = 2
360
[    1.331174] rk_iommu fdbac800.iommu: version = 2
361
[    1.331361] rk_iommu fdbb0800.iommu: version = 2
362
[    1.331548] rk_iommu fdbdf000.iommu: version = 2
363
[    1.331809] rk_iommu fdbef000.iommu: version = 2
364
[    1.332084] rk_iommu fdc38700.iommu: version = 2
365
[    1.332358] rk_iommu fdc48700.iommu: version = 2
366
[    1.332563] rk_iommu fdcb7f00.iommu: version = 2
367
[    1.332794] rk_iommu fdcc7f00.iommu: version = 2
368
[    1.332972] rk_iommu fdce0800.iommu: version = 2
369
[    1.333081] rk_iommu fdd97e00.iommu: version = 2
370
[    1.333393] SCSI subsystem initialized
371
[    1.333467] usbcore: registered new interface driver usbfs
372
[    1.333483] usbcore: registered new interface driver hub
373
[    1.333498] usbcore: registered new device driver usb
374
[    1.333535] mc: Linux media interface: v0.10
375
[    1.333547] videodev: Linux video capture interface: v2.00
376
[    1.333573] pps_core: LinuxPPS API ver. 1 registered
377
[    1.333577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
378
[    1.333584] PTP clock support registered
379
[    1.333837] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
380
[    1.333870] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
381
[    1.335042] Advanced Linux Sound Architecture Driver Initialized.
382
[    1.335222] Bluetooth: Core ver 2.22
383
[    1.335235] NET: Registered protocol family 31
384
[    1.335239] Bluetooth: HCI device and connection manager initialized
385
[    1.335245] Bluetooth: HCI socket layer initialized
386
[    1.335249] Bluetooth: L2CAP socket layer initialized
387
[    1.335256] Bluetooth: SCO socket layer initialized
388
[    1.336548] rockchip-cpuinfo cpuinfo: SoC            : 35880000
389
[    1.336554] rockchip-cpuinfo cpuinfo: Serial         : a70594ab5554aece
390
[    1.336880] clocksource: Switched to clocksource arch_sys_counter
391
[    1.634251] NET: Registered protocol family 2
392
[    1.634358] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
393
[    1.636181] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
394
[    1.636272] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
395
[    1.636597] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
396
[    1.637340] TCP: Hash tables configured (established 65536 bind 65536)
397
[    1.637395] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
398
[    1.637540] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
399
[    1.637778] NET: Registered protocol family 1
400
[    1.638009] RPC: Registered named UNIX socket transport module.
401
[    1.638015] RPC: Registered udp transport module.
402
[    1.638019] RPC: Registered tcp transport module.
403
[    1.638022] RPC: Registered tcp NFSv4.1 backchannel transport module.
404
[    1.638370] PCI: CLS 0 bytes, default 64
405
[    1.639226] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
406
[    1.641340] Initialise system trusted keyrings
407
[    1.641420] workingset: timestamp_bits=62 max_order=21 bucket_order=0
408
[    1.643430] squashfs: version 4.0 (2009/01/31) Phillip Lougher
409
[    1.643683] NFS: Registering the id_resolver key type
410
[    1.643694] Key type id_resolver registered
411
[    1.643697] Key type id_legacy registered
412
[    1.643712] ntfs: driver 2.1.32 [Flags: R/O].
413
[    1.643793] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
414
[    1.643880] fuse: init (API version 7.32)
415
[    1.644003] SGI XFS with security attributes, no debug enabled
416
[    1.664558] NET: Registered protocol family 38
417
[    1.664566] Key type asymmetric registered
418
[    1.664570] Asymmetric key parser 'x509' registered
419
[    1.664585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
420
[    1.664589] io scheduler mq-deadline registered
421
[    1.664593] io scheduler kyber registered
422
[    1.665035] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
423
[    1.665236] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
424
[    1.673058] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
425
[    1.673241] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
426
[    1.676180] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
427
[    1.676325] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
428
[    1.676371] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
429
[    1.676410] pwm-backlight backlight: supply power not found, using dummy regulator
430
[    1.676632] mpp_service mpp-srv: d52577f87 author: slxia 2022-08-11 rk3588_linux_release_v1.0.1_20220620
431
[    1.676638] mpp_service mpp-srv: probe start
432
[    1.676671] rk-pcie fe170000.pcie: missing legacy IRQ resource
433
[    1.676693] rk-pcie fe170000.pcie: IRQ msi not found
434
[    1.676703] rk-pcie fe170000.pcie: use outband MSI support
435
[    1.676712] rk-pcie fe170000.pcie: Missing *config* reg space
436
[    1.676729] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
437
[    1.676756] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
438
[    1.676776] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
439
[    1.676797] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
440
[    1.676813] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
441
[    1.676846] rk-pcie fe170000.pcie: Missing *config* reg space
442
[    1.676909] rk-pcie fe170000.pcie: invalid resource
443
[    1.677966] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
444
[    1.678170] mpp_vdpu2 fdb50400.vdpu: probe device
445
[    1.678275] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
446
[    1.678279] vdpu_init:501: No aclk reset resource define
447
[    1.678284] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
448
[    1.678287] vdpu_init:504: No hclk reset resource define
449
[    1.678365] mpp_vdpu2 fdb50400.vdpu: probing finish
450
[    1.678581] mpp_vepu2 jpege-ccu: probing start
451
[    1.678587] mpp_vepu2 jpege-ccu: probing finish
452
[    1.678709] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
453
[    1.678846] mpp_vepu2 fdba0000.jpege-core: probing start
454
[    1.678953] mpp_vepu2 fdba0000.jpege-core: attach ccu success
455
[    1.679033] mpp_vepu2 fdba0000.jpege-core: probing finish
456
[    1.679134] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
457
[    1.679268] mpp_vepu2 fdba4000.jpege-core: probing start
458
[    1.679369] mpp_vepu2 fdba4000.jpege-core: attach ccu success
459
[    1.679445] mpp_vepu2 fdba4000.jpege-core: probing finish
460
[    1.679545] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
461
[    1.679680] mpp_vepu2 fdba8000.jpege-core: probing start
462
[    1.679776] mpp_vepu2 fdba8000.jpege-core: attach ccu success
463
[    1.679857] mpp_vepu2 fdba8000.jpege-core: probing finish
464
[    1.679948] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
465
[    1.680083] mpp_vepu2 fdbac000.jpege-core: probing start
466
[    1.680176] mpp_vepu2 fdbac000.jpege-core: attach ccu success
467
[    1.680285] mpp_vepu2 fdbac000.jpege-core: probing finish
468
[    1.680570] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
469
[    1.680709] mpp-iep2 fdbb0000.iep: probe device
470
[    1.680823] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
471
[    1.680893] mpp-iep2 fdbb0000.iep: probing finish
472
[    1.681111] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
473
[    1.681316] mpp_jpgdec fdb90000.jpegd: probe device
474
[    1.681496] mpp_jpgdec fdb90000.jpegd: probing finish
475
[    1.681919] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
476
[    1.681974] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
477
[    1.682061] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
478
[    1.682313] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
479
[    1.682423] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
480
[    1.682428] rkvdec2_init:697: No niu aclk reset resource define
481
[    1.682433] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
482
[    1.682436] rkvdec2_init:700: No niu hclk reset resource define
483
[    1.682497] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
484
[    1.682501] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
485
[    1.682636] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
486
[    1.682641] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
487
[    1.682644] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
488
[    1.682648] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
489
[    1.682653] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
490
[    1.682681] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
491
[    1.682760] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
492
[    1.682989] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
493
[    1.683098] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
494
[    1.683103] rkvdec2_init:697: No niu aclk reset resource define
495
[    1.683108] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
496
[    1.683111] rkvdec2_init:700: No niu hclk reset resource define
497
[    1.683161] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
498
[    1.683178] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
499
[    1.683339] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
500
[    1.683344] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
501
[    1.683348] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
502
[    1.683352] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
503
[    1.683356] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
504
[    1.683386] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
505
[    1.683596] mpp_rkvenc2 rkvenc-ccu: probing start
506
[    1.683602] mpp_rkvenc2 rkvenc-ccu: probing finish
507
[    1.683706] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
508
[    1.683881] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
509
[    1.683897] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
510
[    1.684039] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
511
[    1.684121] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
512
[    1.684193] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
513
[    1.684410] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
514
[    1.684427] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
515
[    1.684585] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
516
[    1.684664] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
517
[    1.685190] mpp_av1dec: Adding child /av1d@fdc70000
518
[    1.685414] mpp_av1dec: register device av1d-master
519
[    1.685432] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
520
[    1.685451] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
521
[    1.685460] mpp_av1dec av1d-master: Adding to iommu group 18
522
[    1.685680] mpp_av1dec av1d-master: probing start
523
[    1.685882] mpp_av1dec av1d-master: probing finish
524
[    1.685918] mpp_service mpp-srv: probe success
525
[    1.692667] rk-pcie fe150000.pcie: missing legacy IRQ resource
526
[    1.692698] rk-pcie fe150000.pcie: IRQ msi not found
527
[    1.692710] rk-pcie fe150000.pcie: use outband MSI support
528
[    1.692722] rk-pcie fe150000.pcie: Missing *config* reg space
529
[    1.692744] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
530
[    1.692789] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
531
[    1.692821] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
532
[    1.692860] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
533
[    1.692886] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
534
[    1.692928] rk-pcie fe150000.pcie: Missing *config* reg space
535
[    1.692970] rk-pcie fe150000.pcie: invalid resource
536
[    1.693922] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
537
[    1.693932] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
538
[    1.694781] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
539
[    1.694789] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
540
[    1.695649] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
541
[    1.695657] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
542
[    1.696090] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
543
[    1.696146] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
544
[    1.696199] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
545
[    1.696251] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
546
[    1.696311] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
547
[    1.696981] rockchip-system-monitor rockchip-system-monitor: system monitor probe
548
[    1.697763] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
549
[    1.698150] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A
550
[    1.698481] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 99, base_baud = 1500000) is a 16550A
551
[    1.698699] feba0000.serial: ttyS7 at MMIO 0xfeba0000 (irq = 100, base_baud = 1500000) is a 16550A
552
[    1.698987] febc0000.serial: ttyS9 at MMIO 0xfebc0000 (irq = 101, base_baud = 1500000) is a 16550A
553
[    1.700139] random: fast init done
554
[    1.700194] random: crng init done
555
[    1.701120] rockchip-vop2 fdd90000.vop: Adding to iommu group 17
556
[    1.709464] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
557
[    1.709476] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
558
[    1.709496] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
559
[    1.709504] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
560
[    1.709511] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
561
[    1.709518] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
562
[    1.709725] [drm] failed to init overlay plane Cluster0-win1
563
[    1.709758] [drm] failed to init overlay plane Cluster1-win1
564
[    1.709789] [drm] failed to init overlay plane Cluster2-win1
565
[    1.709818] [drm] failed to init overlay plane Cluster3-win1
566
[    1.720679] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fe1618)
567
[    1.721282] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
568
[    1.721463] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fe9378)
569
[    1.722041] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
570
[    1.722204] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010fe9378)
571
[    1.722246] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517
572
[    1.728187] panel-simple-dsi fde30000.dsi.0: supply power not found, using dummy regulator
573
[    1.730913] brd: module loaded
574
[    1.734064] loop: module loaded
575
[    1.734259] zram: Added device: zram0
576
[    1.734396] lkdtm: No crash points registered, enable through debugfs
577
[    1.734493] system_heap: orders[0] = 6
578
[    1.734498] system_heap: orders[1] = 4
579
[    1.734502] system_heap: orders[2] = 0
580
[    1.735635] ahci fe210000.sata: supply ahci not found, using dummy regulator
581
[    1.735705] ahci fe210000.sata: supply phy not found, using dummy regulator
582
[    1.735818] ahci fe210000.sata: supply target not found, using dummy regulator
583
[    1.735884] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
584
[    1.735906] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
585
[    1.735914] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
586
[    1.735923] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
587
[    1.736539] scsi host0: ahci
588
[    1.736683] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 83
589
[    1.737809] rockchip-spi feb20000.spi: no high_speed pinctrl state
590
[    1.739145] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
591
[    1.739305] rk806 spi2.0: ON: 0x40 OFF:0x0
592
[    1.741075] vdd_gpu_s0: supplied by vcc5v0_sys
593
[    1.742259] vdd_cpu_lit_s0: supplied by vcc5v0_sys
594
[    1.742982] vdd_log_s0: supplied by vcc5v0_sys
595
[    1.743705] vdd_vdenc_s0: supplied by vcc5v0_sys
596
[    1.744522] vdd_ddr_s0: supplied by vcc5v0_sys
597
[    1.744945] vdd2_ddr_s3: supplied by vcc5v0_sys
598
[    1.745612] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
599
[    1.746228] vcc_3v3_s3: supplied by vcc5v0_sys
600
[    1.746766] vddq_ddr_s0: supplied by vcc5v0_sys
601
[    1.747431] vcc_1v8_s3: supplied by vcc5v0_sys
602
[    1.748048] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
603
[    1.748669] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
604
[    1.749217] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
605
[    1.749764] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
606
[    1.750311] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
607
[    1.751019] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
608
[    1.751888] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
609
[    1.752640] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
610
[    1.753366] vcc_3v3_s0: supplied by vcc5v0_sys
611
[    1.753930] vccio_sd_s0: supplied by vcc5v0_sys
612
[    1.754545] pldo6_s3: supplied by vcc5v0_sys
613
[    1.755063] rk806 spi2.0: no sleep-setting state
614
[    1.755070] rk806 spi2.0: no reset-setting pinctrl state
615
[    1.755075] rk806 spi2.0: no dvs-setting pinctrl state
616
[    1.757295] libphy: Fixed MDIO Bus: probed
617
[    1.757484] CAN device driver interface
618
[    1.759064] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
619
[    1.759214] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
620
[    1.759220] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (input).
621
[    1.759226] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x44).
622
[    1.759232] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
623
[    1.759237] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
624
[    1.759251] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
625
[    1.759258] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
626
[    1.759264] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
627
[    1.759278] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
628
[    1.759282] rk_gmac-dwmac fe1c0000.ethernet: clock input from PHY
629
[    1.759504] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
630
[    1.759588] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
631
[    1.759595] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
632
[    1.759601] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
633
[    1.759606] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
634
[    1.759611] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
635
[    1.759616] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
636
[    1.759650] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
637
[    1.759655] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
638
[    1.759661] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
639
[    1.759666] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
640
[    1.759672] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
641
[    1.884706] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
642
[    1.890218] libphy: stmmac: probed
643
[    1.891988] PPP generic driver version 2.4.2
644
[    1.892063] PPP BSD Compression module registered
645
[    1.892069] PPP Deflate Compression module registered
646
[    1.892083] PPP MPPE Compression module registered
647
[    1.892087] NET: Registered protocol family 24
648
[    1.892127] usbcore: registered new interface driver rtl8150
649
[    1.892148] usbcore: registered new interface driver r8152
650
[    1.898032] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x1
651
[    1.904580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
652
[    1.904605] ehci-pci: EHCI PCI platform driver
653
[    1.904637] ehci-platform: EHCI generic platform driver
654
[    1.907088] ehci-platform fc800000.usb: EHCI Host Controller
655
[    1.907190] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
656
[    1.907260] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
657
[    1.920225] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
658
[    1.920319] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
659
[    1.920326] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
660
[    1.920332] usb usb1: Product: EHCI Host Controller
661
[    1.920336] usb usb1: Manufacturer: Linux 5.10.66 ehci_hcd
662
[    1.920341] usb usb1: SerialNumber: fc800000.usb
663
[    1.920547] hub 1-0:1.0: USB hub found
664
[    1.920564] hub 1-0:1.0: 1 port detected
665
[    1.923150] ehci-platform fc880000.usb: EHCI Host Controller
666
[    1.923224] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
667
[    1.923280] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
668
[    1.923581] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
669
[    1.933558] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
670
[    1.933639] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
671
[    1.933646] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
672
[    1.933651] usb usb2: Product: EHCI Host Controller
673
[    1.933656] usb usb2: Manufacturer: Linux 5.10.66 ehci_hcd
674
[    1.933660] usb usb2: SerialNumber: fc880000.usb
675
[    1.933844] hub 2-0:1.0: USB hub found
676
[    1.933859] hub 2-0:1.0: 1 port detected
677
[    1.934232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
678
[    1.934244] ohci-platform: OHCI generic platform driver
679
[    1.934414] ohci-platform fc840000.usb: Generic Platform OHCI controller
680
[    1.934486] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
681
[    1.934537] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
682
[    1.950239] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
683
[    1.966913] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
684
[    1.967098] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
685
[    1.967117] pci_bus 0002:20: root bus resource [bus 20-2f]
686
[    1.967131] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
687
[    1.967146] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
688
[    1.967160] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
689
[    1.967173] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
690
[    1.967221] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
691
[    1.967257] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
692
[    1.967340] pci 0002:20:00.0: supports D1 D2
693
[    1.967353] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
694
[    1.976913] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
695
[    1.977866] pci 0002:20:00.0: Primary bus is hard wired to 0
696
[    1.977894] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
697
[    1.978144] pci 0002:21:00.0: [10ec:8168] type 00 class 0x020000
698
[    1.978226] pci 0002:21:00.0: reg 0x10: initial BAR value 0x00000000 invalid
699
[    1.978239] pci 0002:21:00.0: reg 0x10: [io  size 0x0100]
700
[    1.978334] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
701
[    1.978400] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
702
[    1.978858] pci 0002:21:00.0: supports D1 D2
703
[    1.978871] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
704
[    1.994299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
705
[    1.994308] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
706
[    1.994313] usb usb3: Product: Generic Platform OHCI controller
707
[    1.994318] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
708
[    1.994323] usb usb3: SerialNumber: fc840000.usb
709
[    1.995771] hub 3-0:1.0: USB hub found
710
[    1.995788] hub 3-0:1.0: 1 port detected
711
[    1.997042] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
712
[    1.997080] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
713
[    1.997097] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
714
[    1.997113] pci 0002:20:00.0: BAR 7: assigned [io  0x1000-0x1fff]
715
[    1.997133] pci 0002:21:00.0: BAR 4: assigned [mem 0xf2200000-0xf2203fff 64bit]
716
[    1.997191] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2204000-0xf2204fff 64bit]
717
[    1.997231] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
718
[    1.997247] pci 0002:21:00.0: BAR 0: assigned [io  0x1000-0x10ff]
719
[    1.997274] pci 0002:20:00.0: PCI bridge to [bus 21]
720
[    1.997288] pci 0002:20:00.0:   bridge window [io  0x1000-0x1fff]
721
[    1.997302] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf22fffff]
722
[    1.997309] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
723
[    1.997356] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
724
[    2.000475] pcieport 0002:20:00.0: PME: Signaling with IRQ 156
725
[    2.000744] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded
726
[    2.000796] r8168 0002:21:00.0: enabling device (0000 -> 0003)
727
[    2.003578] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
728
[    2.017084] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00
729
[    2.017115] r8168 0002:21:00.0 (unnamed net_device) (uninitialized): Random ether addr b2:5c:5a:c0:0d:07
730
[    2.017648] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
731
[    2.019755] r8168  Copyright (C) 2021 Realtek NIC software team <nicfae@realtek.com>
732
[    2.019755]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
733
[    2.019755]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
734
[    2.030246] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
735
[    2.049938] ata1: SATA link down (SStatus 0 SControl 300)
736
[    2.056913] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
737
[    2.057635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
738
[    2.057643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
739
[    2.057648] usb usb4: Product: Generic Platform OHCI controller
740
[    2.057654] usb usb4: Manufacturer: Linux 5.10.66 ohci_hcd
741
[    2.057658] usb usb4: SerialNumber: fc8c0000.usb
742
[    2.057843] hub 4-0:1.0: USB hub found
743
[    2.057859] hub 4-0:1.0: 1 port detected
744
[    2.058462] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
745
[    2.058472] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
746
[    2.058547] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
747
[    2.058636] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
748
[    2.058662] xhci-hcd xhci-hcd.5.auto: irq 146, io mem 0xfc400000
749
[    2.058797] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
750
[    2.058804] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
751
[    2.058809] usb usb5: Product: xHCI Host Controller
752
[    2.058813] usb usb5: Manufacturer: Linux 5.10.66 xhci-hcd
753
[    2.058818] usb usb5: SerialNumber: xhci-hcd.5.auto
754
[    2.059002] hub 5-0:1.0: USB hub found
755
[    2.059018] hub 5-0:1.0: 1 port detected
756
[    2.059152] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
757
[    2.059215] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
758
[    2.059225] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
759
[    2.059259] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
760
[    2.059310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
761
[    2.059316] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
762
[    2.059321] usb usb6: Product: xHCI Host Controller
763
[    2.059326] usb usb6: Manufacturer: Linux 5.10.66 xhci-hcd
764
[    2.059331] usb usb6: SerialNumber: xhci-hcd.5.auto
765
[    2.059511] hub 6-0:1.0: USB hub found
766
[    2.059527] hub 6-0:1.0: 1 port detected
767
[    2.059714] usbcore: registered new interface driver cdc_acm
768
[    2.059720] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
769
[    2.059810] usbcore: registered new interface driver uas
770
[    2.059866] usbcore: registered new interface driver usb-storage
771
[    2.059903] usbcore: registered new interface driver usbserial_generic
772
[    2.059916] usbserial: USB Serial support registered for generic
773
[    2.059933] usbcore: registered new interface driver cp210x
774
[    2.059944] usbserial: USB Serial support registered for cp210x
775
[    2.059978] usbcore: registered new interface driver ftdi_sio
776
[    2.059988] usbserial: USB Serial support registered for FTDI USB Serial Device
777
[    2.060077] usbcore: registered new interface driver keyspan
778
[    2.060088] usbserial: USB Serial support registered for Keyspan - (without firmware)
779
[    2.060098] usbserial: USB Serial support registered for Keyspan 1 port adapter
780
[    2.060108] usbserial: USB Serial support registered for Keyspan 2 port adapter
781
[    2.060119] usbserial: USB Serial support registered for Keyspan 4 port adapter
782
[    2.060140] usbcore: registered new interface driver option
783
[    2.060150] usbserial: USB Serial support registered for GSM modem (1-port)
784
[    2.060290] usbcore: registered new interface driver oti6858
785
[    2.060301] usbserial: USB Serial support registered for oti6858
786
[    2.060319] usbcore: registered new interface driver pl2303
787
[    2.060329] usbserial: USB Serial support registered for pl2303
788
[    2.060353] usbcore: registered new interface driver qcserial
789
[    2.060363] usbserial: USB Serial support registered for Qualcomm USB modem
790
[    2.060395] usbcore: registered new interface driver sierra
791
[    2.060407] usbserial: USB Serial support registered for Sierra USB modem
792
[    2.060845] usbcore: registered new interface driver usbtouchscreen
793
[    2.062033] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
794
[    2.062274] i2c /dev entries driver
795
[    2.065945] vdd_cpu_big0_s0: supplied by vcc5v0_sys
796
[    2.073241] vdd_cpu_big1_s0: supplied by vcc5v0_sys
797
[    2.081502] vdd_npu_s0: supplied by vcc5v0_sys
798
[    2.083581] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
799
[    2.087285] aw9523 2-005a: aw9523 no platdata
800
[    2.104832] aw9523 2-005a: aw9523 detected: 0x23
801
[    2.105105] aw9523-leds: Failed to locate of_node [id: -1]
802
[    2.105296] aw9523-gpio: Failed to locate of_node [id: -1]
803
[    2.108727] ....... dysun aw9523_gpio_probe
804
[    2.108778] aw9523-keypad: Failed to locate of_node [id: -1]
805
[    2.109757] dsi0 lt8912_parse_dt: DT property instance_id is 0
806
[    2.109828] lt8912_pwr_gpio= 1.
807
[    2.109848] lt8912_rst_gpio= 0
808
[    2.110256] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
809
[    2.213575] lt8912_rst_gpio= 1
810
[    2.213595]  irq gpio not provided
811
[    2.213676] failed to read byte data index=0
812
[    2.213689] LT8912_VAL_CHIP_REVISION_0 err, ret =-1,reg = 0x0,val = 0x0.
813
[    2.213754] failed to read byte data index=1
814
[    2.213766] LT8912_VAL_CHIP_REVISION_1 err, ret =-1,reg = 0x1,val = 0x0.
815
[    2.213776] dsi0 lt8912 check chip revision not match
816
[    2.213784] lt8912 check chip successful.
817
[    2.213851] lt8912_write: wr err: addr 0x48, reg 0xb2, val 0x1
818
[    2.213864] dsi0 lt8912_write_array: lt8912 reg write 01 to B2 failed.
819
[    2.213930] lt8912_write: wr err: addr 0x4a, reg 0x6, val 0x8
820
[    2.213941] dsi0 lt8912_write_array: lt8912 reg write 08 to 06 failed.
821
[    2.214008] lt8912_write: wr err: addr 0x4a, reg 0x7, val 0xf0
822
[    2.214020] dsi0 lt8912_write_array: lt8912 reg write F0 to 07 failed.
823
[    2.214085] lt8912_write: wr err: addr 0x4a, reg 0x9, val 0x0
824
[    2.214097] dsi0 lt8912_write_array: lt8912 reg write 00 to 09 failed.
825
[    2.214163] lt8912_write: wr err: addr 0x4a, reg 0xf, val 0x2b
826
[    2.214175] dsi0 lt8912_write_array: lt8912 reg write 2B to 0F failed.
827
[    2.214241] lt8912_write: wr err: addr 0x4a, reg 0x37, val 0x0
828
[    2.214253] dsi0 lt8912_write_array: lt8912 reg write 00 to 37 failed.
829
[    2.214319] lt8912_write: wr err: addr 0x4a, reg 0x36, val 0x18
830
[    2.214330] dsi0 lt8912_write_array: lt8912 reg write 18 to 36 failed.
831
[    2.214398] lt8912_write: wr err: addr 0x4a, reg 0x35, val 0x0
832
[    2.214409] dsi0 lt8912_write_array: lt8912 reg write 00 to 35 failed.
833
[    2.214475] lt8912_write: wr err: addr 0x4a, reg 0x34, val 0xde
834
[    2.214487] dsi0 lt8912_write_array: lt8912 reg write DE to 34 failed.
835
[    2.214599] lt8912_enable: enabling default audio configs
836
[    2.214610] lt8912's 720P hdmi mode---.
837
[    2.306915] usb 5-1: new high-speed USB device number 2 using xhci-hcd
838
[    2.449360] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
839
[    2.449387] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
840
[    2.449399] usb 5-1: Product: USB2.1 Hub
841
[    2.449411] usb 5-1: Manufacturer: NearDi
842
[    2.507570] hub 5-1:1.0: USB hub found
843
[    2.507924] hub 5-1:1.0: 4 ports detected
844
[    2.571360] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
845
[    2.589755] usb 6-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
846
[    2.589781] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
847
[    2.589794] usb 6-1: Product: USB3.2 Hub
848
[    2.589805] usb 6-1: Manufacturer: NearDi
849
[    2.619564] hub 6-1:1.0: USB hub found
850
[    2.619917] hub 6-1:1.0: 4 ports detected
851
[    2.650232] lt8912's 720P init mode---.
852
[    2.656188] rtc-hym8563 6-0051: rtc information is valid
853
[    2.661561] rtc-hym8563 6-0051: registered as rtc0
854
[    2.662591] rtc-hym8563 6-0051: setting system clock to 2022-12-30T08:22:42 UTC (1672388562)
855
[    2.664412] ttysWK0 at I/O 0x1 (irq = 159, base_baud = 460800) is a wk2xxx
856
[    2.664509] ttysWK1 at I/O 0x2 (irq = 159, base_baud = 460800) is a wk2xxx
857
[    2.664583] ttysWK2 at I/O 0x3 (irq = 159, base_baud = 460800) is a wk2xxx
858
[    2.664657] ttysWK3 at I/O 0x4 (irq = 159, base_baud = 460800) is a wk2xxx
859
[    2.676616] rkcifhw fdce0000.rkcif: Adding to iommu group 16
860
[    2.676930] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
861
[    2.677021] rkcif rkcif-mipi-lvds: Adding to iommu group 16
862
[    2.677037] rkcif rkcif-mipi-lvds: rkcif driver version: v00.01.0a
863
[    2.677093] rkcif rkcif-mipi-lvds: attach to cif hw node
864
[    2.677098] rkcif rkcif-mipi-lvds: rkcif wait line 0
865
[    2.677105] : terminal subdev does not exist
866
[    2.677109] : terminal subdev does not exist
867
[    2.677113] : terminal subdev does not exist
868
[    2.677117] : terminal subdev does not exist
869
[    2.677122] : get_remote_sensor: video pad[0] is null
870
[    2.677127] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
871
[    2.677132] : get_remote_sensor: video pad[0] is null
872
[    2.677136] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
873
[    2.677141] : get_remote_sensor: video pad[0] is null
874
[    2.677145] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
875
[    2.677149] : get_remote_sensor: video pad[0] is null
876
[    2.677154] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
877
[    2.677992] rkcif rkcif-mipi-lvds2: Adding to iommu group 16
878
[    2.678012] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a
879
[    2.678052] rkcif rkcif-mipi-lvds2: attach to cif hw node
880
[    2.678058] rkcif rkcif-mipi-lvds2: rkcif wait line 0
881
[    2.678063] : terminal subdev does not exist
882
[    2.678067] : terminal subdev does not exist
883
[    2.678071] : terminal subdev does not exist
884
[    2.678075] : terminal subdev does not exist
885
[    2.678080] : get_remote_sensor: video pad[0] is null
886
[    2.678085] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
887
[    2.678089] : get_remote_sensor: video pad[0] is null
888
[    2.678094] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
889
[    2.678098] : get_remote_sensor: video pad[0] is null
890
[    2.678103] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
891
[    2.678107] : get_remote_sensor: video pad[0] is null
892
[    2.678111] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
893
[    2.679764] rkcif rkcif-mipi-lvds: Entity type for entity rockchip-mipi-csi2 was not initialized!
894
[    2.679773] rockchip-mipi-csi2: Async registered subdev
895
[    2.679778] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds!
896
[    2.679887] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
897
[    2.679894] rockchip-mipi-csi2: Async registered subdev
898
[    2.679902] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
899
[    2.680459] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14
900
[    2.680567] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0
901
[    2.680573] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps
902
[    2.680579] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property
903
[    2.680666] rkisp_hw fdcb0000.rkisp: no find phandle sram
904
[    2.680746] rkisp_hw fdcc0000.rkisp: Adding to iommu group 15
905
[    2.680896] rkisp_hw fdcc0000.rkisp: is_thunderboot: 0
906
[    2.680902] rkisp_hw fdcc0000.rkisp: max input:0x0@0fps
907
[    2.680908] rkisp_hw fdcc0000.rkisp: Missing rockchip,grf property
908
[    2.680987] rkisp_hw fdcc0000.rkisp: no find phandle sram
909
[    2.681372] rkisp rkisp0-vir0: rkisp driver version: v01.09.00
910
[    2.681533] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
911
[    2.682982] rkisp rkisp1-vir0: rkisp driver version: v01.09.00
912
[    2.683293] rkisp rkisp1-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
913
[    2.687254] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
914
[    2.687297] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4, wdt_cfg_bound_cpu:5
915
[    2.687889] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
916
[    2.689553] rk_hdmirx fdee0000.hdmirx-controller: rk_hdmirx_hdcp_register success
917
[    2.689598] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
918
[    2.689866] usbcore: registered new interface driver uvcvideo
919
[    2.689878] USB Video Class driver (1.1.1)
920
[    2.693076] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
921
[    2.694292] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
922
[    2.695171] Bluetooth: HCI UART driver ver 2.3
923
[    2.695186] Bluetooth: HCI UART protocol H4 registered
924
[    2.695197] Bluetooth: HCI UART protocol ATH3K registered
925
[    2.695268] usbcore: registered new interface driver bfusb
926
[    2.695340] usbcore: registered new interface driver btusb
927
[    2.695967] cpu cpu0: leakage=14
928
[    2.697698] cpu cpu0: pvtm=1463
929
[    2.697921] cpu cpu0: pvtm-volt-sel=3
930
[    2.698873] cpu cpu4: leakage=11
931
[    2.704812] cpu cpu4: pvtm=1702
932
[    2.708507] cpu cpu4: pvtm-volt-sel=4
933
[    2.709175] cpu cpu6: leakage=11
934
[    2.715085] cpu cpu6: pvtm=1707
935
[    2.718785] cpu cpu6: pvtm-volt-sel=4
936
[    2.720674] cpu cpu0: avs=0
937
[    2.722530] cpu cpu4: avs=0
938
[    2.724403] cpu cpu6: avs=0
939
[    2.725031] cpu cpu0: EM: created perf domain
940
[    2.725125] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
941
[    2.726602] cpu cpu4: EM: created perf domain
942
[    2.726667] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
943
[    2.734213] cpu cpu6: EM: created perf domain
944
[    2.734700] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
945
[    2.746533] sdhci: Secure Digital Host Controller Interface driver
946
[    2.746545] sdhci: Copyright(c) Pierre Ossman
947
[    2.746551] Synopsys Designware Multimedia Card Interface Driver
948
[    2.747200] sdhci-pltfm: SDHCI platform and OF driver helper
949
[    2.747485] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode.
950
[    2.747516] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller.
951
[    2.747527] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a
952
[    2.747553] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 85,32 bit host data width,256 deep fifo
953
[    2.747838] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq
954
[    2.747849] mmc_host mmc1: card is non-removable.
955
[    2.749320] ledtrig-cpu: registered to indicate activity on CPUs
956
[    2.749384] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
957
[    2.749449] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
958
[    2.750817] cryptodev: driver 1.12 loaded.
959
[    2.750873] hid: raw HID events driver (C) Jiri Kosina
960
[    2.751195] usbcore: registered new interface driver usbhid
961
[    2.751206] usbhid: USB HID core driver
962
[    2.758220] optee: probing for conduit method.
963
[    2.758265] optee: revision 3.13 (87d94c5e)
964
[    2.758909] optee: initialized driver
965
[    2.760034] usbcore: registered new interface driver snd-usb-audio
966
[    2.767932] input: headset-keys as /devices/platform/es8388-sound/input/input1
967
[    2.779613] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
968
[    2.780004] ES8323 3-0011: ASoC: error at soc_component_write_no_lock on ES8323.3-0011: -5
969
[    2.819031] mmc0: new HS200 MMC card at address 0001
970
[    2.819664] mmcblk0: mmc0:0001 A3A561 57.6 GiB
971
[    2.819880] mmcblk0boot0: mmc0:0001 A3A561 partition 1 4.00 MiB
972
[    2.820090] mmcblk0boot1: mmc0:0001 A3A561 partition 2 4.00 MiB
973
[    2.820325] mmcblk0rpmb: mmc0:0001 A3A561 partition 3 16.0 MiB, chardev (236:0)
974
[    2.823572]  mmcblk0: p1 p2 p3 p4 p5 p6
975
[    2.832102] input: rockchip,es8388 Headset as /devices/platform/es8388-sound/sound/card0/input2
976
[    2.833248] Initializing XFRM netlink socket
977
[    2.833517] NET: Registered protocol family 10
978
[    2.834306] Segment Routing with IPv6
979
[    2.834355] NET: Registered protocol family 17
980
[    2.834370] NET: Registered protocol family 15
981
[    2.834376] can: controller area network core
982
[    2.834405] NET: Registered protocol family 29
983
[    2.834412] can: raw protocol
984
[    2.834419] can: broadcast manager protocol
985
[    2.834429] can: netlink gateway - max_hops=1
986
[    2.834622] Bluetooth: RFCOMM socket layer initialized
987
[    2.834637] Bluetooth: RFCOMM ver 1.11
988
[    2.834647] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
989
[    2.834656] Bluetooth: HIDP socket layer initialized
990
[    2.834686] [BT_RFKILL]: Enter rfkill_rk_init
991
[    2.834693] [WLAN_RFKILL]: Enter rfkill_wlan_init
992
[    2.835219] [WLAN_RFKILL]: Enter rfkill_wlan_probe
993
[    2.835245] [WLAN_RFKILL]: can't find rockchip,grf property
994
[    2.835251] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275s
995
[    2.835257] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
996
[    2.835263] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
997
[    2.835282] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
998
[    2.835304] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
999
[    2.835314] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
1000
[    2.835319] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
1001
[    2.835326] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
1002
[    2.835332] [WLAN_RFKILL]: Exit rfkill_wlan_probe
1003
[    2.835909] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 148.
1004
[    2.835931] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
1005
[    2.835944] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
1006
[    2.835957] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
1007
[    2.835999] [BT_RFKILL]: Request irq for bt wakeup host
1008
[    2.836056] [BT_RFKILL]: ** disable irq
1009
[    2.836150] [BT_RFKILL]: bt_default device registered.
1010
[    2.836222] Key type dns_resolver registered
1011
[    2.837254] Loading compiled-in X.509 certificates
1012
[    2.837853] pstore: Using crash dump compression: deflate
1013
[    2.838114] rga3_core0 fdb60000.rga: Adding to iommu group 2
1014
[    2.838341] rga: rga3_core0_irq, irq = 33, match scheduler
1015
[    2.838680] rga: rga3_core0 driver loaded successfully ver:3.0.76831
1016
[    2.838702] rga: rga3_core0 probe successfully
1017
[    2.839086] rga3_core1 fdb70000.rga: Adding to iommu group 3
1018
[    2.839242] rga: rga3_core1_irq, irq = 34, match scheduler
1019
[    2.839478] rga: rga3_core1 driver loaded successfully ver:3.0.76831
1020
[    2.839496] rga: rga3_core1 probe successfully
1021
[    2.839869] rga: rga2_irq, irq = 35, match scheduler
1022
[    2.840106] rga: rga2 driver loaded successfully ver:3.2.63318
1023
[    2.840118] rga: rga2 probe successfully
1024
[    2.840560] rga: Module initialized. v1.2.14
1025
[    2.859587] vendor storage:20190527 ret = 0
1026
[    2.873588] usb 5-1.2: new full-speed USB device number 3 using xhci-hcd
1027
[    2.874418] mali fb000000.gpu: Kernel DDK version g12p0-01eac0
1028
[    2.875368] mali fb000000.gpu: leakage=22
1029
[    2.877040] mali fb000000.gpu: pvtm=883
1030
[    2.877110] mali fb000000.gpu: pvtm-volt-sel=3
1031
[    2.878308] mali fb000000.gpu: avs=0
1032
[    2.881318] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
1033
[    2.882043] mali fb000000.gpu: GPU hardware issue table may need updating:
1034
[    2.882043] r0p0 status 5 is unknown; treating as r0p0 status 0
1035
[    2.882064] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
1036
[    2.882187] mali fb000000.gpu: No priority control manager is configured
1037
[    2.882202] mali fb000000.gpu: No memory group manager is configured
1038
[    2.882240] mali fb000000.gpu: Protected memory allocator not available
1039
[    2.883534] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
1040
[    2.883567] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
1041
[    2.883756] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
1042
[    2.883937] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
1043
[    2.884131] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
1044
[    2.886961] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
1045
[    2.887133] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
1046
[    2.888202] mali fb000000.gpu: Probed as mali0
1047
[    2.967464] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
1048
[    2.983203] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
1049
[    2.986020] pcie20_avdd0v85: supplied by vdd_0v85_s0
1050
[    2.988097] pcie20_avdd1v8: supplied by avcc_1v8_s0
1051
[    2.990122] pcie30_avdd0v75: supplied by avdd_0v75_s0
1052
[    2.991800] pcie30_avdd1v8: supplied by avcc_1v8_s0
1053
[    2.993907] reg-fixed-voltage vcc3v3-lcd0-n: nonexclusive access to GPIO for vcc3v3-lcd0-n
1054
[    2.994062] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
1055
[    2.997416] rockchip-csi2-dphy csi2-dcphy0: csi2 dphy0 probe successfully!
1056
[    3.019799] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
1057
[    3.019891] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
1058
[    3.019974] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
1059
[    3.020031] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
1060
[    3.020126] rockchip-drm display-subsystem: failed to get hdmi0_phy_pll: -2
1061
[    3.020164] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2
1062
[    3.021628] [drm] failed to init overlay plane Cluster0-win1
1063
[    3.021809] [drm] failed to init overlay plane Cluster1-win1
1064
[    3.022046] [drm] failed to init overlay plane Cluster2-win1
1065
[    3.022223] [drm] failed to init overlay plane Cluster3-win1
1066
[    3.050504] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
1067
[    3.055603] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
1068
[    3.060030] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
1069
[    3.066618] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc010fe1618)
1070
[    3.067239] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
1071
[    3.068744] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
1072
[    3.069903] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc010fe9378)
1073
[    3.071371] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
1074
[    3.072389] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc010fe9378)
1075
[    3.072505] rockchip-drm display-subsystem: bound fde30000.dsi (ops 0xffffffc010feb278)
1076
[    3.072610] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc010feb6c0)
1077
[    3.072707] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc010feb6c0)
1078
[    3.073385] rockchip-drm display-subsystem: failed to parse loader memory
1079
[    3.174791] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
1080
[    3.204214] dwmmc_rockchip fe2d0000.mmc: Successfully tuned phase to 135
1081
[    3.210556] mmc1: new ultra high speed SDR104 SDIO card at address 0001
1082
[    3.235346] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
1083
[    3.239527] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
1084
[    3.253082] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input3
1085
[    3.261042] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
1086
[    3.261113] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
1087
[    3.261134] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
1088
[    3.261200] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 84,32 bit host data width,256 deep fifo
1089
[    3.264685] rkcif rkcif-mipi-lvds: clear unready subdev num: 1
1090
[    3.264729] rockchip-csi2-dphy0: No link between dphy and sensor
1091
[    3.265640] rockchip-csi2-dphy0: No link between dphy and sensor
1092
[    3.265678] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1093
[    3.265719] rkcif-mipi-lvds: Async subdev notifier completed
1094
[    3.265733] rockchip-csi2-dphy0: No link between dphy and sensor
1095
[    3.265759] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1096
[    3.265772] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP
1097
[    3.265789] rkcif rkcif-mipi-lvds2: clear unready subdev num: 1
1098
[    3.265803] rockchip-csi2-dphy0: No link between dphy and sensor
1099
[    3.266579] rockchip-csi2-dphy0: No link between dphy and sensor
1100
[    3.266614] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1101
[    3.266650] rkcif-mipi-lvds2: Async subdev notifier completed
1102
[    3.266664] rockchip-csi2-dphy0: No link between dphy and sensor
1103
[    3.266689] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1104
[    3.266701] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
1105
[    3.266745] rockchip-csi2-dphy0: No link between dphy and sensor
1106
[    3.266790] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1107
[    3.266802] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP
1108
[    3.266822] rockchip-csi2-dphy0: No link between dphy and sensor
1109
[    3.266860] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1110
[    3.266918] rkcif-mipi-lvds: There is not terminal subdev, not synchronized with ISP
1111
[    3.268845] RKNPU fdab0000.npu: Adding to iommu group 0
1112
[    3.269132] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
1113
[    3.269695] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
1114
[    3.269740] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
1115
[    3.269770] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
1116
[    3.270583] [drm] Initialized rknpu 0.7.2 20220428 for fdab0000.npu on minor 1
1117
[    3.272544] RKNPU fdab0000.npu: leakage=12
1118
[    3.273838] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
1119
[    3.278803] RKNPU fdab0000.npu: pvtm=888
1120
[    3.282560] RKNPU fdab0000.npu: pvtm-volt-sel=4
1121
[    3.284185] RKNPU fdab0000.npu: avs=0
1122
[    3.284440] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
1123
[    3.291945] RKNPU fdab0000.npu: failed to find power_model node
1124
[    3.292018] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
1125
[    3.292048] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
1126
[    3.295391] cfg80211: Loading compiled-in X.509 certificates for regulatory database
1127
[    3.301525] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
1128
[    3.302697] rockchip-pm rockchip-suspend: not set pwm-regulator-config
1129
[    3.303835] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '19:42:11', on 'Sep 27 2022'.
1130
[    3.304279] Mali:
1131
[    3.304283] Mali device driver loaded
1132
[    3.304298] rkisp rkisp0-vir0: clear unready subdev num: 1
1133
[    3.304522] rkisp0-vir0: Async subdev notifier completed
1134
[    3.304535] rkisp rkisp1-vir0: clear unready subdev num: 1
1135
[    3.304732] rkisp1-vir0: Async subdev notifier completed
1136
[    3.304744] ALSA device list:
1137
[    3.304752]   #0: rockchip,es8388
1138
[    3.304759]   #1: rockchip,hdmiin
1139
[    3.304766]   #2: rockchip-hdmi0
1140
[    3.305269] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
1141
[    3.305282] cfg80211: failed to load regulatory.db
1142
[    3.365388] dwhdmi-rockchip fde80000.hdmi: use tmds mode
1143
[    3.365494] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800) for vp0 dclk: 148500000
1144
[    3.366041] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
1145
[    3.366063] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
1146
[    3.366096] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 16(if:40) for vp3 dclk: 148500000
1147
[    3.366138] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out3 div: 2 dclk_core3 div: 2
1148
[    3.366154] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop3 to 148500000, get 148500000
1149
[    3.366182] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
1150
[    3.366196] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
1151
[    3.366209] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
1152
[    3.366510] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
1153
[    3.366721] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
1154
[    3.366756] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
1155
[    3.368687] EXT4-fs (mmcblk0p6): recovery complete
1156
[    3.368849] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
1157
[    3.368905] VFS: Mounted root (ext4 filesystem) on device 179:6.
1158
[    3.369453] devtmpfs: mounted
1159
[    3.373353] Freeing unused kernel memory: 6336K
1160
[    3.387089] Run /sbin/init as init process
1161
[    3.535238] systemd[1]: Failed to look up module alias 'autofs4': Function not implemented
1162

    
1163
Welcome to Ubuntu 22.04 LTS!
1164

    
1165
[    3.570246] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
1166
[    3.570357] ...... dysun 0 dsi_external_bradge_power_on
1167
[    3.570369] ...... dysun 4 dw_mipi_dsi2_encoder_enable
1168
[    3.598279] systemd-fstab-generator[270]: Ignoring "noauto" option for root device
1169
[    3.773711] dw-mipi-dsi2 fde30000.dsi: [drm:dw_mipi_dsi2_encoder_enable] final DSI-Link bandwidth: 990000 x 4 Kbps
1170
[  OK  ] Created slice Slice /system/modprobe.
1171
[  OK  ] Created slice Slice /system/serial-getty.
1172
[  OK  ] Created slice User and Session Slice.
1173
[  OK  ] Started Forward Password R??uests to Wall Directory Watch.
1174
[  OK  ] Reached target Remote File Systems.
1175
[  OK  ] Reached target Slice Units.
1176
[  OK  ] Reached target Swaps.
1177
[  OK  ] Reached target Local Verity Protected Volumes.
1178
[  OK  ] Listening on fsck to fsckd communication Socket.
1179
[  OK  ] Listening on initctl Compatibility Named Pipe.
1180
[  OK  ] Listening on Journal Socket (/dev/log).
1181
[  OK  ] Listening on Journal Socket.
1182
[  OK  ] Listening on udev Control Socket.
1183
[  OK  ] Listening on udev Kernel Socket.
1184
         Mounting /sys/kernel/debug...
1185
         Mounting Kernel Trace File System...
1186
systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
1187
(This warning is only shown for the first unit using IP firewalling.)
1188
         Starting Journal Service...
1189
         Starting Set the console keyboard layout...
1190
         Starting Load Kernel Module configfs...
1191
         Starting Load Kernel Module drm...
1192
         Starting Load Kernel Module fuse...
1193
         Starting Load Kernel Modules...
1194
         Starting Remount Root and Kernel File Systems...
1195
         Starting Coldplug All udev Devices...
1196
[  OK  ] Mounted /sys/kernel/debug.
1197
[  OK  ] Mounted Kernel Trace File System.
1198
[  OK  ] Finished Load Kernel Module configfs.
1199
[    3.899950] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
1200
[    3.901184] dwhdmi-rockchip fde80000.hdmi: use tmds mode
1201
[  OK  ] Finished Load Kernel Module drm.
1202
[  OK  ] Finished Load Kernel Module fuse.
1203
systemd-modules-load.service: Failed with result 'exit-code'.
1204
[FAILED] Failed to start Load Kernel Modules.
1205
See 'systemctl status systemd-modules-load.service' for details.
1206
[  OK  ] Finished Remount Root and Kernel File Systems.
1207
         Mounting FUSE Control File System...
1208
         Mounting Kernel Configuration File System...
1209
         Starting Load/Save Random Seed...
1210
         Starting Apply Kernel Variables...
1211
         Starting Create System Users...
1212
[  OK  ] Mounted FUSE Control File System.
1213
[  OK  ] Mounted Kernel Configuration File System.
1214
[  OK  ] Finished Load/Save Random Seed.
1215
[  OK  ] Finished Apply Kernel Variables.
1216
[  OK  ] Finished Create System Users.
1217
         Starting Create Static Device Nodes in /dev...
1218
[  OK  ] Finished Create Static Device Nodes in /dev.
1219
         Starting Rule-based Manage??for Device Events and Files...
1220
[  OK  ] Finished Set the console keyboard layout.
1221
[  OK  ] Reached target Preparation for Local File Systems.
1222
         Mounting /tmp...
1223
[  OK  ] Mounted /tmp.
1224
[  OK  ] Reached target Local File Systems.
1225
         Starting Set console font and keymap...
1226
         Starting Tell Plymouth To Write Out Runtime Data...
1227
[  OK  ] Finished Set console font and keymap.
1228
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
1229
[  OK  ] Started Journal Service.
1230
         Starting Flush Journal to Persistent Storage...
1231
[  OK  ] Finished Flush Journal to Persistent Storage.
1232
         Starting Create Volatile Files and Directories...
1233
[  OK  ] Started Rule-based Manager for Device Events and Files.
1234
[  OK  ] Finished Create Volatile Files and Directories.
1235
         Starting Network Name Resolution...
1236
         Starting Network Time Synchronization...
1237
         Starting Record System Boot/Shutdown in UTMP...
1238
[  OK  ] Finished Coldplug All udev Devices.
1239
[  OK  ] Started Dispatch Password ??ts to Console Directory Watch.
1240
[  OK  ] Reached target Local Encrypted Volumes.
1241
[  OK  ] Finished Record System Boot/Shutdown in UTMP.
1242
[  OK  ] Started Network Time Synchronization.
1243
[  OK  ] Created slice Slice /system/systemd-backlight.
1244
[  OK  ] Reached target System Time Set.
1245
         Starting Load/Save Screen ??ness of backlight:backlight...
1246
[  OK  ] Finished Load/Save Screen ??htness of backlight:backlight.
1247
[  OK  ] Reached target System Initialization.
1248
[  OK  ] Started CUPS Scheduler.
1249
[  OK  ] Started Trigger to poll fo??y enabled on GCP LTS non-pro).
1250
[  OK  ] Started Start whoopsie on ??n of the /var/crash directory.
1251
[  OK  ] Started Trigger anacron every hour.
1252
[  OK  ] Started Daily apt download activities.
1253
[  OK  ] Started Daily apt upgrade and clean activities.
1254
[  OK  ] Started Daily dpkg database backup timer.
1255
[  OK  ] Started Periodic ext4 Onli??ata Check for All Filesystems.
1256
[  OK  ] Started Discard unused blocks once a week.
1257
[  OK  ] Started Refresh fwupd metadata regularly.
1258
[  OK  ] Started Daily man-db regeneration.
1259
[  OK  ] Started Message of the Day.
1260
[  OK  ] Started Daily Cleanup of Temporary Directories.
1261
[  OK  ] Started Ubuntu Advantage Timer for running repeated jobs.
1262
[  OK  ] Reached target Path Units.
1263
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
1264
0m.OK  ] Listening on CUPS Scheduler.
1265
pdate_sensor_info: stream[2] get remote terminal sensor failed!
1266
[    4.356886] stream_cif_mipi_id2: update sensor info [  OK  ] Started [0;1;39mSetup rockchip platform environment.
1267
         Starting LSB: GNOME Display Manager...
1268
ailed -19Listening on Socket activation for snappy daemon.
1269
[    4.357096] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1270
[    4.357100] rkcif_scale_ch1: update sensor info failed -19
1271
[    4.358095] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1272
[    4.358107] stream_cif_mipi_id0: update sensor info failed -19
1273
[    4.358111] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1274
[    4.358114] rkcif_tools_id[  OK  ] Started 0;1;39mLSB: GNOME Display Manager.
1275
: update sensor info failed -19agement mechanism...
1276
[    4.358455] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1277
[    4.358459] rkcif_scale_ch3: update sensor info failed -19
1278
[    4.359010] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1279
[    4.359013] rkcif_scale_ch1: update sensor info failed -19
1280
[    4.359145] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1281
[    4.359149] rkcif_tools_id1: update sensor info failed -19
1282
[    4.360108] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1283
[    4.360111] stream_cif_mipi_id3: update sensor info failed -19
1284
[    4.360735] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1285
[    4.360739] stream_cif_mipi_id1: update sensor info failed -19
1286
[    4.362009] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1287
[    4.362014] rkcif_tools_id2: update sensor info failed -19cket.
1288
[    4.367867] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1289
[    4.367874] rkcif_tools_id2: update sensor info failed -19cket.
1290
[    4.367900] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1291
[    4.367905] stream_cif_mipi_id1: update sensor info failed -19
1292
[    4.368385] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1293
[    4.368391] rkcif_tools_id1: update sensor info failed -19
1294
[    4.369407] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1295
[    4.369411] rkcif_scale_ch0: update sensor info failed -19
1296
[  OK  ] Started triggerhappy global hotkey daemon.
1297
[  OK  ] Started LSB: automatic crash report generation.
1298
[  OK  ] Listening on Load/Save RF ??itch Status /dev/rfkill Watch.
1299
         Starting Load/Save RF Kill Switch Status...
1300
[  OK  ] Finished Remove Stale Onli??ext4 Metadata Check Snapshots.
1301
[    4.580297] rk-pcie fe150000.pcie: PCIe Link Fails.
1302
[    4.580325] rk-pcie fe150000.pcie: failed to initialize hostm[0] [  OK  ] Started [0;1;39menable ASYNC for Ubuntu Display.
1303
[  OK  ] Started Load/Save RF Kill Switch Status.
1304
[  OK  ] Started User Login Management.ate sensor info failed -19
1305
[  OK  ] Started Avahi mDNS/DNS-SD Stack.ate_sensor_info: stream[0] get remote terminal sensor failed!
1306
[  OK  ] Started WPA supplicant.update sensor info failed -19
1307
[  OK  ] Started Switcheroo Control Proxy service.r_info: stream[0] get remote terminal sensor failed!
1308
         Starting Save/Restore Sound Card State... failed -19
1309
[  OK  ] Started Network Manager.Started rkisp 3A engine.i
1310
[  OK  ] Reached target Network. stream[2] get remote terminal sensor failed!
1311
[  OK  ] Reached target Network is Online. sensor info failed -19
1312
[  OK  ] Started Download data for ??ailed at package install time.] get remote terminal sensor failed!
1313
[  OK  ] Started Check to see wheth??w version of Ubuntu available.
1314
[  OK  ] Reached target Timer Units.f_update_sensor_info: stream[3] get remote terminal sensor failed!
1315
         Starting CUPS Scheduler... update sensor info failed -19
1316
         Starting Tool to automatic??mit kernel crash signatures...2] get remote terminal sensor failed!
1317
         Starting OpenVPN service...te sensor info failed -19
1318
         Starting /etc/rc.local Compatibility...sor_info: stream[3] get remote terminal sensor failed!
1319
         Starting Setup rockchip platform environment...d -19
1320
         Starting OpenBSD Secure Shell server...ound de_vice /dev/ttyFIQ0
1321
         Starting Permit User Sessions...
1322
[  OK  ] Started Unattended Upgrades Shutdown.
1323
[  OK  ] Finished OpenVPN service.
1324
[  OK  ] Started /etc/rc.local Compatibility.
1325
[  OK  ] Finished Permit User Sessions.
1326
[  OK  ] Started Authorization Manager.
1327
[  OK  ] Started Power Profiles daemon.
1328
         Starting Modem Manager...
1329
         Starting adbd for ubuntu...
1330
         Starting Light Display Manager...
1331
[    4.858557] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.12 (wlan=r892223-20210928-1)
1332
[    4.         Starting Hold until boot process finishes up...
1333
858678] [dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 8131584(7941K)
1334
         Starting Hostname Service...
1335
[  OK  ] Finished Save/Restore Sound Card State.
1336
[  OK  ] Finished Hold until boot process finishes up.
1337
[  OK  ] Reached target Sound Card.
1338
[  OK  ] Started Serial Getty on ttyFIQ0.
1339
         Starting Set console scheme...
1340
[    4.877924] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1341
[  OK  ] Finished Set console scheme.
1342
[  OK  ] Started Tool to automatica??ubmit kernel crash signatures.
1343
[  OK  ] Created slice Slice /system/getty.
1344
[  OK  ] Started Getty on tty1.
1345
[  OK  ] Reached target Login Prompts.
1346
[  OK  ] Started Hostname Service.
1347
[  OK  ] Started Light Display Manager.
1348
         Starting Network Manager Script Dispatcher Service...
1349
[    5.079135] Filesystem uses "xz" compression. This is not supported
1350
[  OK  ] Started OpenBSD Secure Shell server.
1351
[  OK  ] Started Accounts Service.
1352
[  OK  ] Started Network Manager Script Dispatcher Service.
1353
         Starting Manage, Install and Generate Color Profiles...
1354
[  OK  ] Started Disk Manager.
1355
[  OK  ] Started Snap Daemon.
1356
[  OK  ] Started Dispatcher daemon for systemd-networkd.
1357
         Starting Wait until snapd is fully seeded...
1358
         Starting Time & Date Service...
1359
[FAILED] Failed to start Bluetooth management mechanism.
1360
See 'systemctl status blueman-mechanism.service' for details.
1361
[  OK  ] Started Time & Date Service.
1362
[    5.347055] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 3, size 139264
1363
[    5.347075] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 4, size 0
1364
[    5.351739] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 7, size 33696
1365
[    5.351753] [dhd] dhd_conf_set_chiprev : devid=0xaae8, chip=0xaae8, chiprev=2
1366
[    5.351771] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 0, size 10320
1367
[    5.351877] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 5, size 65536
1368
[    5.352138] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 19, size 65712
1369
[    5.352152] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 20, size 262144
1370
[    5.352169] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 22, size 65536
1371
[  OK  ] Started Modem Manager.
1372
[    5.366033] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 1, size 10300
1373
[    5.366057] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : bus_type 0, index 0, sectoin 2, size 65536
1374
[    5.367372] [dhd][wlan0] wl_android_wifi_off : in g_wifi_on=1, on_failure=1
1375
[  OK  ] Started Manage, Install and Generate Color Profiles.
1376
[  OK  ] Reached target Hardware activated USB gadget.
1377
[    5.476922] [dhd][wlan0] wl_android_wifi_off : out
1378
[  OK  ] Finished Wait until snapd is fully seeded.
1379
[    5.586697] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
1380
[    5.586731] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
1381
[    5.586742] mali fb000000.gpu: Protected memory allocator not found, Firmware protected mode entry will not be supported
1382
[  OK  ] Started Setup rockchip platform environment.
1383
[    5.674782] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty
1384
[  OK  ] Started CUPS Scheduler.
1385
[  OK  ] Started Make remote CUPS printers available locally.
1386
[  OK  ] Started adbd for ubuntu.
1387
[  OK  ] Reached target Multi-User System.
1388
[  OK  ] Reached target Graphical Interface.
1389
         Starting Record Runlevel Change in UTMP...
1390
[  OK  ] Finished Record Runlevel Change in UTMP.
1391

    
1392
Ubuntu 22.04 LTS LPA3588 ttyFIQ0
1393

    
1394
LPA3588 login: root (automatic login)
1395

    
1396
Welcome to Ubuntu 22.04 LTS (GNU/Linux 5.10.66 aarch64)
1397

    
1398
 * Documentation:  https://help.ubuntu.com
1399
 * Management:     https://landscape.canonical.com
1400
 * Support:        https://ubuntu.com/advantage
1401

    
1402
This system has been minimized by removing packages and content that are
1403
not required on a system that users do not log into.
1404

    
1405
To restore this content, you can run the 'unminimize' command.
1406

    
1407
0 updates can be applied immediately.
1408

    
1409
Last login: Fri Dec 30 08:21:21 UTC 2022 on ttyFIQ0
1410
root@LPA3588:~# [    9.059754] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1411
[    9.059770] stream_cif_mipi_id0: update sensor info failed -19
1412
[    9.060331] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1413
[    9.060339] stream_cif_mipi_id1: update sensor info failed -19
1414
[    9.060667] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1415
[    9.060673] rkcif_tools_id2: update sensor info failed -19
1416
[    9.060985] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1417
[    9.060990] stream_cif_mipi_id2: update sensor info failed -19
1418
[    9.061273] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1419
[    9.061285] stream_cif_mipi_id3: update sensor info failed -19
1420
[    9.061576] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1421
[    9.061581] rkcif_scale_ch0: update sensor info failed -19
1422
[    9.061795] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1423
[    9.061798] rkcif_scale_ch1: update sensor info failed -19
1424
[    9.062005] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1425
[    9.062009] rkcif_scale_ch2: update sensor info failed -19
1426
[    9.062216] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1427
[    9.062221] rkcif_scale_ch3: update sensor info failed -19
1428
[    9.062425] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1429
[    9.062432] rkcif_tools_id0: update sensor info failed -19
1430
[    9.062659] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1431
[    9.062663] rkcif_tools_id1: update sensor info failed -19
1432
[    9.062886] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1433
[    9.062890] stream_cif_mipi_id0: update sensor info failed -19
1434
[    9.063094] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1435
[    9.063098] stream_cif_mipi_id1: update sensor info failed -19
1436
[    9.063330] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1437
[    9.063334] stream_cif_mipi_id2: update sensor info failed -19
1438
[    9.063554] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1439
[    9.063559] stream_cif_mipi_id3: update sensor info failed -19
1440
[    9.063795] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1441
[    9.063799] rkcif_scale_ch0: update sensor info failed -19
1442
[    9.064021] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1443
[    9.064025] rkcif_scale_ch1: update sensor info failed -19
1444
[    9.064258] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1445
[    9.064263] rkcif_scale_ch2: update sensor info failed -19
1446
[    9.064477] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1447
[    9.064481] rkcif_scale_ch3: update sensor info failed -19
1448
[    9.064721] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1449
[    9.064729] rkcif_tools_id0: update sensor info failed -19
1450
[    9.064948] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1451
[    9.064952] rkcif_tools_id1: update sensor info failed -19
1452
[    9.065201] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1453
[    9.065206] rkcif_tools_id2: update sensor info failed -19
1454
[    9.359199] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1455
[    9.359209] stream_cif_mipi_id0: update sensor info failed -19
1456
[    9.359309] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1457
[    9.359312] stream_cif_mipi_id1: update sensor info failed -19
1458
[    9.359367] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1459
[    9.359370] rkcif_tools_id2: update sensor info failed -19
1460
[    9.359421] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1461
[    9.359424] stream_cif_mipi_id2: update sensor info failed -19
1462
[    9.359498] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1463
[    9.359501] stream_cif_mipi_id3: update sensor info failed -19
1464
[    9.359559] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1465
[    9.359561] rkcif_scale_ch0: update sensor info failed -19
1466
[    9.359614] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1467
[    9.359616] rkcif_scale_ch1: update sensor info failed -19
1468
[    9.359666] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1469
[    9.359669] rkcif_scale_ch2: update sensor info failed -19
1470
[    9.359743] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1471
[    9.359746] rkcif_scale_ch3: update sensor info failed -19
1472
[    9.359799] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1473
[    9.359802] rkcif_tools_id0: update sensor info failed -19
1474
[    9.359851] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1475
[    9.359854] rkcif_tools_id1: update sensor info failed -19
1476
[    9.359922] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1477
[    9.359925] stream_cif_mipi_id0: update sensor info failed -19
1478
[    9.359995] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1479
[    9.359998] stream_cif_mipi_id1: update sensor info failed -19
1480
[    9.360048] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1481
[    9.360051] stream_cif_mipi_id2: update sensor info failed -19
1482
[    9.360100] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1483
[    9.360103] stream_cif_mipi_id3: update sensor info failed -19
1484
[    9.360156] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1485
[    9.360159] rkcif_scale_ch0: update sensor info failed -19
1486
[    9.360247] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1487
[    9.360255] rkcif_scale_ch1: update sensor info failed -19
1488
[    9.360309] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1489
[    9.360312] rkcif_scale_ch2: update sensor info failed -19
1490
[    9.360365] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1491
[    9.360368] rkcif_scale_ch3: update sensor info failed -19
1492
[    9.360440] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1493
[    9.360442] rkcif_tools_id0: update sensor info failed -19
1494
[    9.360493] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1495
[    9.360496] rkcif_tools_id1: update sensor info failed -19
1496
[    9.360549] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1497
[    9.360552] rkcif_tools_id2: update sensor info failed -19
1498
[    9.361178] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1499
[    9.361183] stream_cif_mipi_id0: update sensor info failed -19
1500
[    9.361259] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1501
[    9.361262] stream_cif_mipi_id1: update sensor info failed -19
1502
[    9.361339] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1503
[    9.361342] rkcif_tools_id2: update sensor info failed -19
1504
[    9.361416] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1505
[    9.361424] stream_cif_mipi_id2: update sensor info failed -19
1506
[    9.361496] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1507
[    9.361499] stream_cif_mipi_id3: update sensor info failed -19
1508
[    9.361574] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1509
[    9.361577] rkcif_scale_ch0: update sensor info failed -19
1510
[    9.361646] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1511
[    9.361649] rkcif_scale_ch1: update sensor info failed -19
1512
[    9.361717] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1513
[    9.361720] rkcif_scale_ch2: update sensor info failed -19
1514
[    9.361790] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1515
[    9.361793] rkcif_scale_ch3: update sensor info failed -19
1516
[    9.361861] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1517
[    9.361864] rkcif_tools_id0: update sensor info failed -19
1518
[    9.361933] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1519
[    9.361936] rkcif_tools_id1: update sensor info failed -19
1520
[    9.362017] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1521
[    9.362020] stream_cif_mipi_id0: update sensor info failed -19
1522
[    9.362089] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1523
[    9.362093] stream_cif_mipi_id1: update sensor info failed -19
1524
[    9.362162] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1525
[    9.362165] stream_cif_mipi_id2: update sensor info failed -19
1526
[    9.362234] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1527
[    9.362238] stream_cif_mipi_id3: update sensor info failed -19
1528
[    9.362307] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1529
[    9.362310] rkcif_scale_ch0: update sensor info failed -19
1530
[    9.362381] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1531
[    9.362387] rkcif_scale_ch1: update sensor info failed -19
1532
[    9.362455] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1533
[    9.362458] rkcif_scale_ch2: update sensor info failed -19
1534
[    9.362524] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1535
[    9.362527] rkcif_scale_ch3: update sensor info failed -19
1536
[    9.362597] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1537
[    9.362599] rkcif_tools_id0: update sensor info failed -19
1538
[    9.362667] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1539
[    9.362670] rkcif_tools_id1: update sensor info failed -19
1540
[    9.362742] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1541
[    9.362744] rkcif_tools_id2: update sensor info failed -19
1542
[   10.161462] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1543
[   15.197372] [dhd][wlan0] dhd_open : Enter
1544
[   15.197527] [dhd][wlan0] wl_android_wifi_on : in g_wifi_on=0
1545
[   15.803383] [dhd] dhd_conf_read_config : Ignore config file /vendor/etc/firmware/config.txt
1546
[   15.803489] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_ag.bin
1547
[   15.803518] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_ap6275s.txt
1548
[   15.803673] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_ag.blob
1549
[   15.803702] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
1550
[   16.070950] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
1551
[   16.070976] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
1552
[   16.070983] [dhd] dhd_conf_set_txglom_params : txinrx_thres=128, dhd_txminmax=-1
1553
[   16.070989] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
1554
[   16.070998] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
1555
[   16.153158] [dhd] dhd_conf_set_country : set country CN, revision 0
1556
[   16.158558] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
1557
[   16.167700] [dhd][wlan0] wl_android_wifi_on : Success
1558
[   16.227446] [dhd][wlan0] dhd_open : Exit ret=0
1559
[   16.227465] [dhd][wlan0] dhd_pri_open : tx queue started
1560
[   16.388681] [dhd][wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
1561
[   20.008746] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1562
[   20.008756] stream_cif_mipi_id0: update sensor info failed -19
1563
[   20.009085] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1564
[   20.009091] stream_cif_mipi_id1: update sensor info failed -19
1565
[   20.009270] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1566
[   20.009274] rkcif_tools_id2: update sensor info failed -19
1567
[   20.009436] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1568
[   20.009440] stream_cif_mipi_id2: update sensor info failed -19
1569
[   20.009634] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1570
[   20.009638] stream_cif_mipi_id3: update sensor info failed -19
1571
[   20.009799] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1572
[   20.009803] rkcif_scale_ch0: update sensor info failed -19
1573
[   20.009958] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1574
[   20.009961] rkcif_scale_ch1: update sensor info failed -19
1575
[   20.010117] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1576
[   20.010120] rkcif_scale_ch2: update sensor info failed -19
1577
[   20.010340] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1578
[   20.010343] rkcif_scale_ch3: update sensor info failed -19
1579
[   20.010504] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1580
[   20.010507] rkcif_tools_id0: update sensor info failed -19
1581
[   20.010676] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1582
[   20.010680] rkcif_tools_id1: update sensor info failed -19
1583
[   20.010849] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1584
[   20.010852] stream_cif_mipi_id0: update sensor info failed -19
1585
[   20.011005] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1586
[   20.011009] stream_cif_mipi_id1: update sensor info failed -19
1587
[   20.011162] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1588
[   20.011165] stream_cif_mipi_id2: update sensor info failed -19
1589
[   20.011340] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1590
[   20.011345] stream_cif_mipi_id3: update sensor info failed -19
1591
[   20.011506] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1592
[   20.011510] rkcif_scale_ch0: update sensor info failed -19
1593
[   20.011670] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1594
[   20.011673] rkcif_scale_ch1: update sensor info failed -19
1595
[   20.011864] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1596
[   20.011868] rkcif_scale_ch2: update sensor info failed -19
1597
[   20.012038] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1598
[   20.012042] rkcif_scale_ch3: update sensor info failed -19
1599
[   20.012228] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1600
[   20.012231] rkcif_tools_id0: update sensor info failed -19
1601
[   20.012397] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1602
[   20.012400] rkcif_tools_id1: update sensor info failed -19
1603
[   20.012569] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1604
[   20.012572] rkcif_tools_id2: update sensor info failed -19
1605
[   20.193747] [dhd][wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
1606
[   20.367967] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1607
[   20.414671] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1608
[   20.468040] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1609
[   20.494906] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1610
[   20.508245] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1611
[   20.555014] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1612
[   20.585586] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1613
[   20.749700] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1614
[   20.881629] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1615
[   20.900138] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1616
[   20.900148] stream_cif_mipi_id0: update sensor info failed -19
1617
[   20.900241] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1618
[   20.900244] stream_cif_mipi_id1: update sensor info failed -19
1619
[   20.900322] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1620
[   20.900325] rkcif_tools_id2: update sensor info failed -19
1621
[   20.900367] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1622
[   20.900371] stream_cif_mipi_id0: update sensor info failed -19
1623
[   20.900394] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1624
[   20.900397] stream_cif_mipi_id2: update sensor info failed -19
1625
[   20.900441] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1626
[   20.900444] stream_cif_mipi_id1: update sensor info failed -19
1627
[   20.900455] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1628
[   20.900458] stream_cif_mipi_id3: update sensor info failed -19
1629
[   20.900504] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1630
[   20.900507] rkcif_tools_id2: update sensor info failed -19
1631
[   20.900512] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1632
[   20.900515] rkcif_scale_ch0: update sensor info failed -19
1633
[   20.900564] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1634
[   20.900567] stream_cif_mipi_id2: update sensor info failed -19
1635
[   20.900570] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1636
[   20.900572] rkcif_scale_ch1: update sensor info failed -19
1637
[   20.900620] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1638
[   20.900624] stream_cif_mipi_id3: update sensor info failed -19
1639
[   20.900626] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1640
[   20.900627] rkcif_scale_ch2: update sensor info failed -19
1641
[   20.900679] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1642
[   20.900682] rkcif_scale_ch3: update sensor info failed -19
1643
[   20.900733] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1644
[   20.900736] rkcif_tools_id0: update sensor info failed -19
1645
[   20.900740] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1646
[   20.900743] rkcif_scale_ch0: update sensor info failed -19
1647
[   20.900789] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1648
[   20.900792] rkcif_tools_id1: update sensor info failed -19
1649
[   20.900840] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1650
[   20.900843] rkcif_scale_ch1: update sensor info failed -19
1651
[   20.900857] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1652
[   20.900860] stream_cif_mipi_id0: update sensor info failed -19
1653
[   20.900899] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1654
[   20.900902] rkcif_scale_ch2: update sensor info failed -19
1655
[   20.900912] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1656
[   20.900914] stream_cif_mipi_id1: update sensor info failed -19
1657
[   20.900951] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1658
[   20.900954] rkcif_scale_ch3: update sensor info failed -19
1659
[   20.900967] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1660
[   20.900970] stream_cif_mipi_id2: update sensor info failed -19
1661
[   20.901006] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1662
[   20.901008] rkcif_tools_id0: update sensor info failed -19
1663
[   20.901020] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1664
[   20.901023] stream_cif_mipi_id3: update sensor info failed -19
1665
[   20.901057] rkcif-mipi-lvds: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1666
[   20.901060] rkcif_tools_id1: update sensor info failed -19
1667
[   20.901075] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1668
[   20.901077] rkcif_scale_ch0: update sensor info failed -19
1669
[   20.901115] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1670
[   20.901118] stream_cif_mipi_id0: update sensor info failed -19
1671
[   20.901127] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1672
[   20.901133] rkcif_scale_ch1: update sensor info failed -19
1673
[   20.901169] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1674
[   20.901171] stream_cif_mipi_id1: update sensor info failed -19
1675
[   20.901182] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1676
[   20.901185] rkcif_scale_ch2: update sensor info failed -19
1677
[   20.901222] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1678
[   20.901225] stream_cif_mipi_id2: update sensor info failed -19
1679
[   20.901236] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1680
[   20.901239] rkcif_scale_ch3: update sensor info failed -19
1681
[   20.901291] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1682
[   20.901294] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1683
[   20.901295] rkcif_tools_id0: update sensor info failed -19
1684
[   20.901299] stream_cif_mipi_id3: update sensor info failed -19
1685
[   20.901347] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1686
[   20.901348] rkcif_tools_id1: update sensor info failed -19
1687
[   20.901352] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1688
[   20.901355] rkcif_scale_ch0: update sensor info failed -19
1689
[   20.901370] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1690
[   20.901402] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1691
[   20.901405] rkcif_tools_id2: update sensor info failed -19
1692
[   20.901410] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1693
[   20.901412] rkcif_scale_ch1: update sensor info failed -19
1694
[   20.901462] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1695
[   20.901464] rkcif_scale_ch2: update sensor info failed -19
1696
[   20.901513] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed!
1697
[   20.901516] rkcif_scale_ch3: update sensor info failed -19
1698
[   20.901588] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed!
1699
[   20.901591] rkcif_tools_id0: update sensor info failed -19
1700
[   20.901644] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed!
1701
[   20.901646] rkcif_tools_id1: update sensor info failed -19
1702
[   20.901726] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed!
1703
[   20.901729] rkcif_tools_id2: update sensor info failed -19
1704
[   20.918395] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1705
[   23.361529] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1706
[   23.374699] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1707
[   23.401543] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1708
[   23.428125] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1709
[   24.127956] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1710
[   24.278089] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1711
[   24.328003] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1712
[   24.378203] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1713
[   24.654658] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1714
[   24.698474] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1715
[   24.752947] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1716
[   24.858152] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1717
[   24.898181] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1718
[   24.941350] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1719
[   24.984599] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1720
[   25.194348] [dhd][wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
1721
[   25.194681] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1722
[   25.241368] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1723
[   25.488010] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1724
[   25.541319] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1725
[   25.601296] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
1726
[   32.206393] [dhd][wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
1727
[   42.199566] [dhd][wlan0] wl_run_escan : LEGACY_SCAN sync ID: 4, bssidx: 0
(2-2/4)